Himself a kayak. Drawing, description

PERSONAL TRANSPORT: GROUND, WATER, AIR
Free library / Directory / Personal transport: land, water, air

Himself a kayak. Personal transport

Personal transport: land, water, air

Directory / Personal transport: land, water, air

Make two oars out of wood. Then take a sheet of waterproof material (plywood - waterproof or well-dyed, tin, duralumin) and roll it into a cylinder about 750 mm long and 300 mm in diameter. From the same material, cut out two end discs with holes for the oars. Put the discs on the oars, and connect the ends of the oars with a light sleeve. Then the entire structure must be assembled and sealed with bitumen. Swimming equipment is ready.

Himself a kayak
Float-ball with oars

Before us is a boat, although it does not have a hull - it is replaced by the swimmer himself. Take the projectile in your hands and boldly go into the water. The hollow cylinder is an excellent float and will keep the swimmer in the water well.

Himself a kayak
float paddle

The paddle float is able to withstand loads up to 100 kg, its maneuverability is good. However, as experience has shown, it is better if the float is not cylindrical, but has the shape of a ball with the same volume (about 10 liters). It is more difficult to make it, but if it is possible to make it from foam, then the work will not take much time. The driving performance of a projectile with a ball float will improve markedly.

Author: P.Petrov

We recommend interesting articles Section Personal transport: land, water, air:

▪ simple mini car

▪ Mikrus car

▪ introcycle

See other articles Section Personal transport: land, water, air.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Energy from space for Starship 08.05.2024

Producing solar energy in space is becoming more feasible with the advent of new technologies and the development of space programs. The head of the startup Virtus Solis shared his vision of using SpaceX's Starship to create orbital power plants capable of powering the Earth. Startup Virtus Solis has unveiled an ambitious project to create orbital power plants using SpaceX's Starship. This idea could significantly change the field of solar energy production, making it more accessible and cheaper. The core of the startup's plan is to reduce the cost of launching satellites into space using Starship. This technological breakthrough is expected to make solar energy production in space more competitive with traditional energy sources. Virtual Solis plans to build large photovoltaic panels in orbit, using Starship to deliver the necessary equipment. However, one of the key challenges ... >>

New method for creating powerful batteries 08.05.2024

With the development of technology and the expanding use of electronics, the issue of creating efficient and safe energy sources is becoming increasingly urgent. Researchers at the University of Queensland have unveiled a new approach to creating high-power zinc-based batteries that could change the landscape of the energy industry. One of the main problems with traditional water-based rechargeable batteries was their low voltage, which limited their use in modern devices. But thanks to a new method developed by scientists, this drawback has been successfully overcome. As part of their research, scientists turned to a special organic compound - catechol. It turned out to be an important component that can improve battery stability and increase its efficiency. This approach has led to a significant increase in the voltage of zinc-ion batteries, making them more competitive. According to scientists, such batteries have several advantages. They have b ... >>

Alcohol content of warm beer 07.05.2024

Beer, as one of the most common alcoholic drinks, has its own unique taste, which can change depending on the temperature of consumption. A new study by an international team of scientists has found that beer temperature has a significant impact on the perception of alcoholic taste. The study, led by materials scientist Lei Jiang, found that at different temperatures, ethanol and water molecules form different types of clusters, which affects the perception of alcoholic taste. At low temperatures, more pyramid-like clusters form, which reduces the pungency of the "ethanol" taste and makes the drink taste less alcoholic. On the contrary, as the temperature increases, the clusters become more chain-like, resulting in a more pronounced alcoholic taste. This explains why the taste of some alcoholic drinks, such as baijiu, can change depending on temperature. The data obtained opens up new prospects for beverage manufacturers, ... >>

Random news from the Archive

Replacing silicon to reduce transistor size 06.12.2020

Silicon has been the dominant microchip material for decades, but its dominance may be ending. MIT researchers have found that an indium gallium arsenide alloy could be the basis for making smaller, more energy efficient transistors.

Transistors are the building blocks of computers. They act as switches, either interrupting the electric current, or allowing it to continue, and thereby ensure the operation of computers. However, in order for the growth of computer power not to stop, more compact transistors are needed. Today, semiconductor manufacturing is based on silicon, but there are alternatives. For example, indium gallium arsenide (InGaAs).

This material has excellent electron transport properties. InGaAs transistors can process signals quickly and operate at relatively low voltage, which means they can really improve the performance of computers. But there is one catch, writes MIT News. On a small scale, the famous electron transport of this compound is degraded. This problem has led some researchers to declare InGaAs an unsuitable material for transistor production.

However, the MIT scientists found that indium gallium arsenide's performance problems are due in part to oxide trapping, which makes it harder for electrons to pass through transistors.

After studying their frequency dependence - the speed at which electrical pulses travel through a transistor - they noticed that the performance of InGaAs drops at low frequencies. But at a frequency of 1 GHz or more, the connection works perfectly - no worse than silicon.

Scientists are confident that this problem can be solved or reduced to nothing, and they also hope that their discovery will spur new research on indium gallium arsenide.

Carbon nanotubes could be another alternative to silicon in field-effect transistors, but so far they have been produced in small quantities in laboratories. Specialists from the United States proposed a technology for creating CNFET on an industrial scale.

Other interesting news:

▪ Protecting the body from the negative effects of lack of sleep

▪ Sad eyes of a cow

▪ Razer Ornata - the first keyboards with Razer Mecha-Membrane switches

▪ Vegetarians are healthier than meat eaters

▪ Light of extraterrestrial cities

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Normative documentation on labor protection. Article selection

▪ article What is it with you, whatever you miss, there is nothing! Popular expression

▪ article How does oil pollute drinking water? Detailed answer

▪ article Wheelchair. Personal transport

▪ article Classification of soaps. Simple recipes and tips

▪ Article Magic Pencil. Focus Secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews