OCCUPATIONAL SAFETY AND HEALTH
Instructions for labor protection when dismantling supports Occupational Safety and Health / Standard instructions for labor protection Safe Operation 1. General requirements for labor protection 1.1. Persons at least 18 years of age who have passed a medical examination, have been trained in safe working methods, have passed an examination of knowledge of labor requirements and safety, have an electrical safety group, and have the appropriate qualifications in accordance with the tariff and qualification directory, are allowed to work on the dismantling of supports. After checking the knowledge of safe methods of work, the electrician is issued an appropriate certificate. In the future, the workers' knowledge of safety regulations is checked annually. 1.2. Personnel for dismantling supports must be well aware of the rules for the technical operation of electrical installations and have the appropriate qualification group for safety. 1.3. Support dismantling personnel must strictly follow the safety regulations established for personnel servicing electrical networks and electrical installations. 1.4. It is necessary to strictly comply with the internal regulations in force at the construction site. 1.5. If you receive an industrial injury, you must stop work, notify the foreman about this and contact the first-aid post (medical unit). 1.6. Having noticed a violation of safety regulations by other workers or a danger to others, one cannot remain indifferent, one should warn the worker and foreman about the need to comply with the requirements that ensure the safety of work. 1.7. Support dismantling personnel must comply with the following safety requirements: b) fire safety rules; c) rules of personal hygiene. 1.8. Be able to provide assistance to victims of injuries. 1.9. When traveling to the place of work and back by car, strictly observe the rules for transporting people by car and follow the commands of the car's supervisor. 1.10 Personnel dismantling supports should be aware that in case of violation of the requirements of the instructions, they are liable in accordance with applicable law. 1.11. Support dismantling personnel is allowed with the following protective equipment: overalls; combined mittens, leather boots with a metal toe cap. In winter: cotton jacket with insulated lining, cotton trousers with insulated lining. 2. Labor protection requirements before starting work 2.1. The support dismantling personnel are obliged to put their overalls in order: fasten or clasp the cuffs of the sleeves with a wide elastic band; tuck in your clothes so that there are no fluttering ends, put on a tight-fitting headdress and tuck your hair under it. 2.2. It is necessary to inspect and tidy up the workplace, remove objects that interfere with work; check the serviceability of the working tool and arrange it in a convenient and safe order for use. 2.3. Check whether the necessary shutdowns have been made on the line and whether measures have been taken to exclude the possibility of supplying voltage to the place of work. 2.5. Get the necessary protective equipment (dielectric gloves, galoshes, safety belt, mats, etc.) and check their serviceability. It is not allowed to use untested protective equipment and with an expired period of validity. 3. Labor protection requirements before starting work 3.1. Work on the replacement of support elements, dismantling of supports and wires of overhead lines must be carried out according to the technological map or PPR. 3.2. The methods of felling the support are determined by the responsible work manager. 3.3. It is not allowed to dig out both support posts at once when replacing single and double attachments of U- and AP-shaped supports. 3.4. When dismantling supports with the help of a drilling and crane installation, it is allowed to carry out specially trained workers who have a certificate for this. 3.5. When dismantling the supports manually, the maximum load per worker should not exceed 30 kg. 3.6. When dismantling and lifting the support, do not stand under the support being lifted. 3.7. Do not leave unearthed supports and untied wires during breaks. 3.8. Do not stay in the pit when lifting the supports. 4. Safety requirements in emergency situations 4.1. If a malfunction is detected in the operation of the equipment that threatens the personnel, stop work and report to the manager. 4.2. In case of an accident, it is necessary to provide first aid to the victim, report to the head. 5. Safety requirements at the end of work 5.1. the personnel is obliged to put the workplace in order, remove and fold the tools, devices and personal protective equipment in the places intended for this. 5.2. Notify the foreman of all malfunctions and malfunctions noticed in the course of work and the measures taken. We recommend interesting articles Section Standard instructions for labor protection: ▪ Working with an odorant Standard instruction on labor protection ▪ Mast lift operator. Standard instruction on labor protection See other articles Section Standard instructions for labor protection. Read and write useful comments on this article. Latest news of science and technology, new electronics: Artificial leather for touch emulation
15.04.2024 Petgugu Global cat litter
15.04.2024 The attractiveness of caring men
14.04.2024
Other interesting news: ▪ Greenlanders came from Siberia ▪ Under the gaze of the machine ▪ How many computers in the world ▪ Predatory bacteria as a living antibiotic News feed of science and technology, new electronics
Interesting materials of the Free Technical Library: ▪ section of the site Voltage stabilizers. Article selection ▪ compass article. History of invention and production ▪ article How many works did William Shakespeare write? Detailed answer ▪ article Instructor of the security organization service. Job description ▪ article CD-ROM as an Audio-CD player. Encyclopedia of radio electronics and electrical engineering ▪ article Trick with a rope ring. Focus secret
Leave your comment on this article: All languages of this page Home page | Library | Articles | Website map | Site Reviews www.diagram.com.ua |