Labor protection instruction for the driver of the auger snowplow

Free technical library

OCCUPATIONAL SAFETY AND HEALTH
Free library / Occupational Safety and Health / Standard instructions for labor protection

Occupational safety instructions for the driver of a rotary snow blower. Full document

Occupational Safety and Health

Occupational Safety and Health / Standard instructions for labor protection

Comments on the article

1. General safety requirements

1.1. Persons at least 18 years of age who are recognized as fit for this work by the medical staff are allowed to work as a driver of a rotary auger cleaner. commission, having special Trained and received a license to drive a car, and have undergone instruction in labor safety and fire safety.

1.2. When a driver is registered for a job by order of the enterprise, a car of a specific brand is assigned to him.

1.3. After being hired, the driver is obliged to accept the vehicle according to the act and perform only the work that is permitted by the administration.

1.4. The driver must have:

certificate (with a coupon) for the right to drive a car.
technical passport card.
waybill.

1.5. In the parking area, the driver must comply with the following rules:

be attentive to the signals of drivers of moving vehicles.
walk on sidewalks, paths and crossings specially designed for pedestrians.
Do not enter the fence without permission.

1.6. Use tools and fixtures exactly as intended.

1.7. When preparing your vehicle for clearing and loading snow, pay attention to the condition of the tires, batteries, brake system, steering, lighting and alarm devices, snow blade and brushes.

1.8. The driver is obliged to give a sound signal in the following cases:

at the start of snow removal;
when reversing;
in areas of limited visibility.

1.9. Refuel the car with fuel when the engine is not running.

1.10. The driver must take special care when pouring hot water into the cooling system. On a hot engine, open the radiator cap using a glove or covering it with a rag. The cork should be opened carefully, preventing intense steam from escaping.

1.11. Before starting to move from a stopping place (parking lot), the driver must make sure that it is safe for workers and other unauthorized persons, give a warning signal and only then move off.

1.12. It is not allowed to operate a snowplow in the dark without lighting.

2. Safety requirements before starting work

2.1. Before starting work, the driver of a rotary snow blower is required to check all the mechanisms of the vehicle: chassis, working part, fastening of components and assemblies.

2.2. Before starting the engine, make sure that the gearbox control lever. is in the off (neutral) position.

It is prohibited to entrust starting the engine and operating the rotary snow blower to unauthorized persons.

2.3. Upon arrival at the work site, the driver must carefully familiarize himself with the nature and conditions of work, the condition of the road and transfer the auger snow blower from the transport position to the working position.

3. Safety requirements during work

3.1. During operation, the control of the rotary auger snow blower must not be transferred to another person. Under no circumstances should you carry out any work, even short-term work, when removing snow on a rotary auger mechanism.

3.2. While driving, it is forbidden to get out of the car and get into it.

3.3. Before getting off the snow loader, place the transmission control lever in neutral and apply the parking brake.

3.4. When stopping for a short time, be sure to turn off the working element (PTO).

3.5. When stopping for a long time, do not leave the blade and conveyor in a raised position.

3.6. When working, strictly follow the rules of the road.

3.7. When moving over obstacles or when descending a mountain, it is necessary to engage second gear, avoiding sudden jolts and rolls of the snow loader.

3.8. The driver of a snow blower is strictly prohibited from:

start working on a faulty snow loader;
move along a road (site) with a transverse slope of more than 12°;
carry out bunkering of the car in order to start the engine;
operate a snow loader in places littered with iron pieces, rods, boards, wire and other objects;
remove any objects from the paws and chain while the engine is running;
turn on the working body during transfers and the transport position of the working body;
turn on the front drive axle when driving on roads with dry hard surfaces;
approach the working body closer than 5 m;
repair the wheels until the air is completely released from the chambers;
inflate tires if there are people near the wheel on the side of the removable bead ring, because If the ring breaks, it can lead to an accident.

3.9. When loading, the snow loader must move along the street chute in the direction opposite to city traffic; there must be a worker on duty near the snow loader, who gives commands to the drivers and is responsible for safety in the area between the snow loader and the dump truck. Workers operating a snow loader must wear safety vests.

3.10. Operating a snow loader directly under active power lines of any voltage is prohibited. When working in the security zone of power lines, the following requirements must be met: the distance from any part of the machine or the load being lifted in any position, including at the maximum lift of the conveyor, to the nearest wire located under the direction must be at least:

For voltage up to 1 kV - 1,5; 20 kV - 2 m, 110 kV - 4 m, 220 kV - 5 m, 330 kV - 6 m; over 500 kV - 9 m.

In this case, the driver must first be issued a work permit, determine the conditions for the work, and a manager from among the engineers must be appointed responsible.

3.11. When driving under an energized power line, the working part of the snow loader must be in the transport position.

Moving the machine off-road under live power line wires should be done in places where the wires have the least sag.

4. Safety requirements in emergency situations

4.1. If the fuel ignites, the worker must use a fire extinguisher or knock out the flame with earth, sand, or cover with felt, asbestos blanket, or tarpaulin. Do not fill with water! If the flame cannot be put out, call the fire department.

4.2. In the event of a traffic accident, the driver involved in it must:

stop immediately and do not move the car, as well as other objects related to the incident;
notify traffic police officers;
if necessary, call an ambulance, or send the victim by passing transport to the nearest medical facility and provide your name and vehicle number there, and then return to the scene of the incident;
notify your manager.

5. Safety requirements after completion of work

5.1. After returning from the line, the snow loader driver, together with the mechanic, must check the vehicle. If necessary, the driver must submit a request for routine repairs with a list of faults to be eliminated.

5.2. When storing the vehicle outside of a garage in the winter, drain the water from the radiator and engine and tighten the parking brake lever.

5.3. Wash your hands with soap and warm water or take a shower.

We recommend interesting articles Section Standard instructions for labor protection:

▪ Worker of a bookstore base, collector. Standard instruction on labor protection

▪ Drilling and crane operator. Standard instruction on labor protection

▪ Truck driver. Standard instruction on labor protection

See other articles Section Standard instructions for labor protection.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Artificial leather for touch emulation 15.04.2024

In a modern technology world where distance is becoming increasingly commonplace, maintaining connection and a sense of closeness is important. Recent developments in artificial skin by German scientists from Saarland University represent a new era in virtual interactions. German researchers from Saarland University have developed ultra-thin films that can transmit the sensation of touch over a distance. This cutting-edge technology provides new opportunities for virtual communication, especially for those who find themselves far from their loved ones. The ultra-thin films developed by the researchers, just 50 micrometers thick, can be integrated into textiles and worn like a second skin. These films act as sensors that recognize tactile signals from mom or dad, and as actuators that transmit these movements to the baby. Parents' touch to the fabric activates sensors that react to pressure and deform the ultra-thin film. This ... >>

Petgugu Global cat litter 15.04.2024

Taking care of pets can often be a challenge, especially when it comes to keeping your home clean. A new interesting solution from the Petgugu Global startup has been presented, which will make life easier for cat owners and help them keep their home perfectly clean and tidy. Startup Petgugu Global has unveiled a unique cat toilet that can automatically flush feces, keeping your home clean and fresh. This innovative device is equipped with various smart sensors that monitor your pet's toilet activity and activate to automatically clean after use. The device connects to the sewer system and ensures efficient waste removal without the need for intervention from the owner. Additionally, the toilet has a large flushable storage capacity, making it ideal for multi-cat households. The Petgugu cat litter bowl is designed for use with water-soluble litters and offers a range of additional ... >>

The attractiveness of caring men 14.04.2024

The stereotype that women prefer "bad boys" has long been widespread. However, recent research conducted by British scientists from Monash University offers a new perspective on this issue. They looked at how women responded to men's emotional responsibility and willingness to help others. The study's findings could change our understanding of what makes men attractive to women. A study conducted by scientists from Monash University leads to new findings about men's attractiveness to women. In the experiment, women were shown photographs of men with brief stories about their behavior in various situations, including their reaction to an encounter with a homeless person. Some of the men ignored the homeless man, while others helped him, such as buying him food. A study found that men who showed empathy and kindness were more attractive to women compared to men who showed empathy and kindness. ... >>

Random news from the Archive

Tiny eMMC Embedded Drives from Toshiba 13.10.2014

Toshiba, which recently announced that it plans to transition to ReRAM memory only in 2020, continues to unlock the potential for finer technology standards in flash memory manufacturing. The Japanese manufacturer has introduced a family of embedded flash drives that comply with the eMMC v5.0 specification. The modules use NAND memory chips manufactured using 15nm technology, which Toshiba began to use in mass production this spring. In addition to the memory chips, the 153-pin FBGA package contains a flash memory controller.

The use of 15nm chips has reduced the size of the modules by about 26% compared to similar products from the Toshiba range that use 19nm memory (depending on the modification and volume, the new modules range in size from 11 x 10 x 0,8 to 11,5 .13 x 1,4 x 8 mm). In addition, they outperform their predecessors in read speed by 20% and write speed by XNUMX%.

Embedded eMMC drives support HS-MMC interface with x1, x4 or x8 bus width and are designed for use in consumer electronics devices, including smartphones and tablets. They are designed to operate at temperatures from -25°C to +85°C.

So far, deliveries of trial samples of modules with a capacity of 16 GB have begun. Later, the company expects to start shipping 8GB, 32GB, 64GB, and 128GB variants.

Other interesting news:

▪ Microbial powered space exploration robot

▪ Robotic Tail Arque

▪ Copolymers will increase HDD capacity by 5 times

▪ Texts are typed only by eye movement

▪ Dell Latitude 9000, 7000 and 5000 laptops

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site for the Musician. Selection of articles

▪ article The objectives of the organization of first aid in case of mass lesions. Basics of safe life

▪ Article How many tigers are there on Earth? Detailed answer

▪ Meteor article. Nature miracle

▪ article Final finishing of plumbing products. Simple recipes and tips

▪ Flower Festival article. Focus Secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews