Job description for a fuel supply equipment repairman

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a fuel supply equipment repairman. Full Document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The fuel supply equipment repairman reports directly to _______.
The fuel supply equipment repairman follows the instructions of _______.
The fuel supply equipment repairman replaces _______.
The fuel supply equipment repairman is replaced by _______.
Must know:

technical characteristics of fuel supply equipment;
technical conditions for the acceptance of mechanisms or components from repair;
methods and rules for rejecting worn parts of lifting machines, mechanisms, lifting devices;
rules and instructions for the operation and repair of fuel supply equipment, its regulation;
rules for disconnecting the repaired, from the existing machines and mechanisms;
rules for static and dynamic balancing of rotors, assembly and disassembly of clutches of any design, testing of rigging equipment, lifting machines, structures;
causes of vibration in the machine;
methods and techniques for straightening the shafts of mechanisms;
technology of refilling plain bearings;
rules for taking out for repairs, issuing a work permit;
rules for testing and storage of rigging devices and equipment, lifting machines and mechanisms;
order and organization of work on the repair of equipment;
rationing.

Qualification requirements:

vocational education;
advanced training and work experience by profession as a mechanic for the repair of fuel supply equipment.

II. Official duties

The fuel supply equipment repairman performs the following job responsibilities:

Dismantling, reconstruction, repair, fitting, assembly, adjustment and testing, reconstruction of complex fuel supply equipment assemblies.
Locksmith processing of parts according to 6 - 7 qualifications (1 - 2 accuracy classes) with adjustment and fine-tuning.
Accepts spare parts, welded and riveted joints manufactured according to drawings.
Marking of especially difficult details.
Checks the alignment of bearing housings, the geometric dimensions of metal structures, crane runways, conveyor guides, hoists, booms.
Organizes work on the repair and adjustment of equipment and repair devices, lifting machines and mechanisms.
Determination of the suitability of parts for further work, the possibility of their restoration.
Checking the operation of the main and auxiliary equipment after repair and putting it into operation.
Performing rigging work on moving, assembling, disassembling and installing especially complex and critical assemblies, parts and elements of equipment.

III. Rights

The mechanic for the repair of fuel supply equipment has the right to:

Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
Participate in the discussion of issues related to the performance of his duties.
Make suggestions for improving the work related to the provisions of this instruction.
Within its competence, report to the management about all identified in the course of its activities, and make proposals for their elimination.
Require management to assist in the performance of their duties.

IV. A responsibility

The fuel supply equipment repairman is responsible for:

For improper performance or non-performance of their official duties, as well as for non-use or directly to their rights provided for by this Job Description - to the extent determined by the current legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor legislation on labor of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Head of testing department. Job description

▪ Radiologist. Job description

▪ Milling machine. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

A method for spontaneous learning of memristor neural networks has been developed 24.03.2021

A new technology that can improve the learnability of artificial neural networks has been unveiled by an international team of researchers affiliated with the Ulsan National Institute of Science and Technology (UNIST) and Tsinghua University in China.

The proposed method exploits the "resistance drift" (rise in electrical resistance) of a phase change material in semiconductor memory during training. Information updates are recorded by increasing the electrical resistance in the memristor, which acts as a synapse and additionally takes into account the relationship between the changing template and the training data.

The effectiveness of this method was demonstrated using experimental phase change memristor (PCM) arrays that worked as a neural network. In tests to classify handwritten text consisting of numbers from 0 to 9, such devices showed the effect of improving learning ability by about 3%. In particular, the recognition accuracy of the number 8, which is traditionally difficult to classify in handwritten form, has significantly increased. The learning ability has improved due to the synapse update pattern, which changes depending on the complexity of the classification.

An important advantage of the new method is that the learnability can be improved without additional energy costs, since the resistance of the PCM increases spontaneously due to structural relaxation after the transition to the amorphous phase.

The researchers expect that their results will contribute to the development of learning algorithms that use the properties of memristor devices and open up a new direction in the development of neuromorphic computing chips.

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Audio and video surveillance. Selection of articles

▪ article The current century and the past century. Popular expression

▪ article Where does the word miniature come from? Detailed answer

▪ article Chief (senior) dispatcher. Job description

▪ article Simple autoprobe. Encyclopedia of radio electronics and electrical engineering

▪ article Series of resistance and capacitance values. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews