Job description for a milling machine

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a milling machine operator. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The milling operator is directly subordinated to _______.
The milling operator follows the instructions of _______.
The milling operator replaces _______.
The milling operator is replaced by _______.
The milling operator is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
Upon transfer to another job or dismissal from the position, the Milling Operator is responsible for the proper and timely delivery of cases to the person entering this position, and in the absence of such, to the person replacing him or directly to his supervisor.
Must know:

design and rules for checking the accuracy of complex universal milling-copying, jig-boring, horizontal, vertical and special milling machines of various types and designs;
methods of installation, fastening and alignment of complex parts and methods for determining the technological sequence of processing;
device, geometry and rules of heat treatment, sharpening and finishing of all types of cutting tools;
calculations related to the adjustment of machines;
rules for determining the most advantageous cutting conditions according to reference books and the passport of the machine;
ways to achieve the established qualifications and roughness parameters.

II. Official duties

The milling operator performs the following job responsibilities:

Milling of complex experimental and expensive parts and tools in 1-5 grades, having several mating with curved cylindrical surfaces, with places that are difficult to access for processing and measurements, using universal and special cutting tools and optical devices.
Milling complex large-sized parts, assemblies, thin-walled long parts subject to warping and deformation, on unique milling machines of various designs.
Installation of large parts that require combined fastening and precise alignment in various planes, including the performance of the specified work on the processing of parts from hard-to-machine high-alloy and heat-resistant materials using the combined plasma-machining method.

III. Rights

The milling operator has the right:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The cutter is responsible for:

improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine;
violation of the rules and regulations governing the activities of the enterprise;
offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine;
infliction of material damage - within the limits determined by the current labor and civil legislation of Ukraine;
compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information;
compliance with internal regulations, safety and fire safety rules.

We recommend interesting articles Section Job descriptions:

▪ Senior creative manager of the radio station. Job description

▪ Salesman. Job description

▪ Head of the repair department. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Fitness bracelets for cows 09.12.2022

The use of smart technologies to monitor the health, reproduction, location and environmental conditions of cattle can contribute to food safety and supply chain efficiency, but this monitoring increases energy costs for an already high industry. To combat this, scientists have developed a wearable sentient device for cows that captures the kinetic energy generated by even their slightest movements and uses it to power smart ranch technology.

“On a ranch, monitoring information about the environment and health of cattle can help prevent disease and improve efficiency in breeding and pasture management. This information can include oxygen concentration, air temperature and humidity, amount of exercise, reproductive cycles, diseases, and milk production. "explained co-author Zutao Zhang, an energy researcher at Southwestern Jiaotong University in China.

"Smart ranch" involves cows wearing small sensory devices around their ankles and necks that are powered by whatever the cows do during their normal ranch activities.

There is a huge amount of kinetic energy that can be harvested during the daily movements of cattle, such as walking, running, and even neck movements.

Once captured, the energy is stored in a lithium battery and used to power the device. The Kinetic Energy Collector specifically collects the kinetic energy of weak motion.

The design of the team is unique as it contains a movement amplification mechanism that uses magnets and a pendulum to enhance the small movements of the cows.

The scientists also tested the devices on humans and found that a light jog was enough to measure the temperature in the device. Researchers see future applications in sports monitoring, healthcare, smart home and wireless sensor networks.

Other interesting news:

▪ Friction welding wood

▪ Digital home through the eyes of the people

▪ The aliens didn't find us

▪ Hyperstable artificial protein

▪ Garmin Quantix 5 marine smart watch

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Computer devices. Article selection

▪ article Pond and waterfall in the garden. Tips for the home master

▪ How did medicine originate? Detailed answer

▪ article Cutter. Standard instruction on labor protection

▪ article Coded exit to intercity. Encyclopedia of radio electronics and electrical engineering

▪ article A simple source of emergency power. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews