Job description for packer-cementer

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for packer-cementer. Full Document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The packer-cementer reports directly to _______.
The packer-cementer follows the instructions of _______.
The packer-cementer replaces _______.
The packer-cementer is replaced by _______.
The packer-cementer is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
Upon transfer to another job or dismissal from the position, the Packer-Cementer is responsible for the proper and timely delivery of cases to the person entering this position, and in the absence of such, to the person replacing him or directly to his supervisor.
Must know:

rules and methods for laying and backfilling parts and products with a cementing mass;
compositions of cementing masses;
properties of insulating materials;
technical requirements for machined parts and products.

II. Official duties

The packer-cementer performs the following job responsibilities:

Laying parts and products in boxes, boxes, pots and pipes, observing the established space between them.
Isolation of the corresponding places in parts that are not subject to carburizing.
Backfilling boxes with cementing mass, closing and coating them.

III. Rights

The packer-cementer has the right:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The packer-cementer is responsible for:

improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine;
violation of the rules and regulations governing the activities of the enterprise;
offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine;
infliction of material damage - within the limits determined by the current labor and civil legislation of Ukraine;
compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information;
compliance with internal regulations, safety and fire safety rules.

We recommend interesting articles Section Job descriptions:

▪ Own correspondent. Job description

▪ Physiologist. Job description

▪ Gas welder. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

My own battery 07.06.2003

Fuel cells, created so far, run on hydrogen, methane, alcohol, gas and other traditional fuels. In such an element, the fuel is oxidized at the electrode under the influence of a catalyst, and an electron flow occurs.

Physicist Nicholas Maino of the University of Texas (USA) has developed a subminiature fuel cell that runs on the same fuel that people work on - on glucose. Any food we eat is first of all converted in the body into glucose, which is carried by the blood throughout the body to nourish the cells. Therefore, the new fuel cell is able to work if it is simply implanted under the skin.

A biofuel cell consists of two electrodes - the thinnest carbon fibers, dressed with two types of enzymes involved in the absorption of glucose in the body. These electrodes, when implanted into the body, use the glucose present in the blood, in living cells, and in the extracellular fluid, thereby generating a current.

In the experiments of scientists, two electrodes with a diameter of 7 micrometers each gave a voltage of 0,8 volts at normal body temperature, and the generated power was 0,6 microwatts. This is enough, for example, to power a silicon chip - an implantable sensor that can constantly measure the vital parameters of the body and transmit them through a low-power radio transmitter to a recording device mounted on the patient's belt. In the future, such a device, upon a signal from the body, will be able to inject the necessary medicine into the blood.

The first practical application will be limited to monitoring the well-being of experimental animals during physiological experiments.

Other interesting news:

▪ Quantum teleportation of information inside a diamond

▪ Sea air is not so clean

▪ musical carps

▪ DC-DC Converters MAX1553/4

▪ The ancestral home of the Indians - Altai

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the website Residual current devices. Selection of articles

▪ article German Emmanuil Yakovlevich (Emil Krotkiy). Famous aphorisms

▪ article What were military armored rubbers? Detailed answer

▪ article Equipment caches. Spy things

▪ article How to solder SMD. Part two. Encyclopedia of radio electronics and electrical engineering

▪ article Scheme, pinout (pinout) cable Panasonic G450, G500, G520, G600. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews