Job description for a gas welder

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a gas welder. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The gas welder is directly subordinated to _______.
The gas welder follows the instructions of _______.
The gas welder replaces _______.
The gas welder is replaced by _______.
A gas welder is appointed and dismissed by the head of the department in agreement with the head of the department.
Must know:

variety of light and heavy alloys, their welding and mechanical properties;
types of corrosion and factors causing it;
metallography of welded seams;
methods of special tests of welded products and the purpose of each of them.

When transferring to another job or dismissal from a position, the Gas Welder is responsible for the proper and timely delivery of work to the person taking up the current position, and in the absence of one, to the person replacing him or directly to his supervisor.

II. Official duties

The gas welder performs the following job responsibilities:

Gas welding of complex parts, mechanism components, structures and pipelines made of high-carbon, alloyed, special and corrosion-resistant steels, cast iron, non-ferrous metals and alloys designed to operate under dynamic and vibration loads and under high pressure.
Surfacing with hard alloys of complex parts, assemblies, structures and mechanisms.

III. Rights

The gas welder has the right:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties.
control the fulfillment of production tasks, the timely execution of individual orders by subordinate employees.
request and receive the necessary materials and documents related to the issues of its activities and the activities of employees subordinate to it.
interact with other services of the enterprise on production and other issues that are part of its functional duties.
get acquainted with the draft decisions of the management of the enterprise regarding the activities of the Division.
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description.
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline.
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The gas operator is responsible for:

improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine.
violation of the rules and regulations governing the activities of the enterprise.
offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.
compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information.
compliance with internal regulations, safety and fire safety rules.

We recommend interesting articles Section Job descriptions:

▪ Shooting control panel operator. Job description

▪ Deputy chief physician of the hospital for clinical and expert work. Job description

▪ Flight operator for checking main pipelines. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Growing stem cells on the ISS 10.05.2023

Scientists will send stem cells into space to study the effect of weak gravity or microgravity in space on them.

Induced pluripotent stem cells (iPSCs), a type of stem cells that can develop into the three main groups of cells that make up the human body, will be cultured in space aboard the International Space Station (ISS) by astronauts flying on the private Axiom Space Ax 2 mission. The mission is scheduled aboard a SpaceX Falcon 9 rocket on May 21 from the Kennedy Space Center in Florida.

Growing these cells and allowing them to differentiate in space will allow researchers to determine whether microgravity affects how iPSCs develop into other cell types, such as brain and heart cells.

iPSC is a powerful cell type that has been reprogrammed from an adult cell to return to a state called "pluripotency". While in this state, the cell can transform into almost any type of cell found in the human body. This makes iPSC important for creating disease models and developing specific treatments.

However, producing iPSCs on Earth is challenging, in part due to the planet's gravitational influence, which can limit the expansion and growth of these cells. In a low gravity environment, like the ISS orbiting the Earth at an altitude of about 408 km, this barrier can be removed.

Other interesting news:

▪ Bright and slim surface mount digital displays

▪ Next Generation Solid State Drives from Toshiba

▪ Snails will eat England

▪ Semiconductor RSL10 single-chip system

▪ Ancient people could see dinosaurs

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Amateur Radio Technologies. Selection of articles

▪ article Four hundred comparatively honest ways of taking money. Popular expression

▪ article Which Russian writer affectionately called his wife a crocodile? Detailed answer

▪ article Bayonet knot. Travel Tips

▪ article Both the board and the case. Encyclopedia of radio electronics and electrical engineering

▪ article Soaring vase. Focus secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews