Job description for a plasterer

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a plasterer. Full Document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The plasterer is directly subordinated to _______.
The plasterer follows the instructions of _______.
The plasterer replaces _______.
Plaster replaces _______.
The plasterer is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
Upon transfer to another job or dismissal from office, the Plasterer is responsible for the proper and timely handing over of cases to the person entering this position, and in the absence of such, to the person replacing him or directly to his supervisor.
Must know:

methods and techniques for marking particularly complex surfaces for plaster;
techniques and methods for performing artistic plastering.

II. Official duties

The Plasterer performs the following duties:

Performance of especially difficult works at plastering of surfaces and repair of plaster.
Performs related duties in accordance with production needs.

III. Rights

The plasterer has the right:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The plasterer is responsible for:

improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine;
violation of the rules and regulations governing the activities of the enterprise;
offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine;
infliction of material damage - within the limits determined by the current labor and civil legislation of Ukraine;
compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information;
compliance with internal regulations, safety and fire safety rules.

We recommend interesting articles Section Job descriptions:

▪ Cemetery cleaner. Job description

▪ Head of Patent Department. Job description

▪ Driller. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Bridges and tunnels of New York are equipped with facial recognition systems 16.10.2016

In order to increase efficiency in the fight against terrorism, the authorities of New York intend to protect their citizens and visitors to the city by introducing an innovative facial recognition system at strategically important facilities. We are talking about installing cameras and auxiliary equipment in crowded places and vehicles, which would allow the police to monitor what is happening in real time and identify the threat in a timely manner - to identify in the crowd and follow the movement of persons put on the wanted list by law enforcement officers.

New York Governor Andrew Cuomo has come forward with the initiative and is determined to place facial recognition systems at every intersection, as well as at key sections of tunnels, bridges and even the space below them to quickly identify violators. The tasks of this complex, thanks to which it is planned to test an advanced face recognition algorithm in real conditions, will also include the identification of license plates on vehicles.

As Mr. Cuomo noted, airport buildings, along with the territory adjacent to it, and large transit hubs, such as the projected Penn-Farley station complex, will be equipped with a similar system.

Andrew Cuomo spoke about plans to introduce automatic toll collection systems, which would significantly save time spent on this procedure and reduce the number of traffic jams. The driver will not need to stop the vehicle to pay the toll, as the receipt will be sent by mail based on the photograph taken by the cameras.

Additionally, New York's bridges will be equipped with sensors to provide continuous seismic activity readings as part of the anti-terrorism program described above, and will also be decorated with LED illumination to improve the aesthetic component.

Other interesting news:

▪ Plastic material with the strength of aluminum

▪ Xiaomi Mobility Intelligent AI massage chair

▪ Copying the human brain into a chip

▪ 12,5Gbps Mindspeed Matrix Switchers

▪ Growing seafood in laboratories

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Life of remarkable physicists. Article selection

▪ article Eat the dog. Popular expression

▪ article What is typhoid fever? Detailed answer

▪ article Work at the distiller. Standard instruction on labor protection

▪ article Digital tape recorder. Encyclopedia of radio electronics and electrical engineering

▪ article Dual Tone Multi-Frequency (DTMF) Generator on AVR. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews