Job description for the operator of the control post of the charge supply system

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for the operator of the control post of the charge supply system. Full Document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The operator of the control post of the charge supply system is directly subordinated to _______.
The operator of the control post of the charge supply system follows the instructions of _______.
The operator of the control post of the charge supply system replaces _______.
The operator of the control post of the charge supply system is replaced by _______.
The operator of the control post of the charge supply system is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
Must know:

basics of the technological process of smelting iron, steel or ferroalloys;
physical and chemical properties of charge materials loaded into the furnace;
diagrams of electrical equipment of the charge supply system;
electrical work.

II. Official duties

The operator of the control post of the charge supply system performs the following duties:

Control of the conveyor supply of charge to the bunkers of blast furnaces or ferroalloy furnaces, self-propelled trolley when supplying deoxidizers to open-hearth furnaces.
Regulation of the supply of charge to the bunkers and ensuring their normal filling.
Turning on and off flows and monitoring the operation of electrical equipment.
When servicing ferroalloy furnaces - preparation and installation of an automatic mode for dosing charge materials using instruments.
Implementation of control over the loading of charge materials from furnace hoppers into the furnace.
Perform routine repairs to equipment.

III. Rights

The operator of the control post of the charge supply system has the right to:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The operator of the control post of the charge supply system is responsible for:

For failure to perform (improper performance) of their official duties provided for by this Job Description, within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor, criminal and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Video engineer. Job description

▪ Store cashier. Job description

▪ Mechanic for the repair of instrumentation. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Peaceful creatures turn into predators 16.01.2017

Last fall, the American firm Northrop Grumman announced plans to develop, together with the US Air Force Research Laboratory, a small laser that would be mounted on fighter jets and serve as a "defensive" weapon, i.e. hit attacking missiles, drones and enemy aircraft. Thanks to active focusing, the future system will be able to perform various tasks as needed, including identifying targets and changing the focus of the laser to maintain maximum efficiency when the air is disturbed along the path of the beam.

Recently, scientists at Yale University unexpectedly discovered another possible use for such a laser, although their research has not (yet) been in the field of defense. They studied the predatory instincts of animals using optogenetics, stimulating the activity of neurons through targeted irradiation of cells. So far, this technique has been used, for example, to deliver drugs to deep brain tissues, possibly treat acquired blindness, and to control pain.

In a new experiment, scientists stimulated neurons in the amygdala of a mouse's brain with a laser and found that one of the nerve groups triggered a predatory instinct in the animal, while another turned on the jaw muscles, causing the mice to bite anything and everyone in their path. When the laser was turned on, the mice jumped on the object, grabbed it with their jaws and began to bite intensely as if it were their victim. Moreover, the hungrier the mice were, the more aggressive their behavior was, and they bit absolutely everything they came across - bottle caps, sticks, toys and live insects. However, they did not attack their fellow caged mice, which is quite valuable if this technology is used for the soldiers of the future.

Other interesting news:

▪ The psychological state of the soldier will show a special marker

▪ Wrist camcorder

▪ The energy of an electron entering water was measured

▪ How to catch a rainbow

▪ Blurred Text Decoder

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Clocks, timers, relays, load switches. Article selection

▪ Article Conversation in favor of the poor. Popular expression

▪ article Why was Carthage at enmity with Rome? Detailed answer

▪ article Maintenance, repair and operation of motor-rail transport. Standard instruction on labor protection

▪ article Earthenware glaze without lead. Simple recipes and tips

▪ article Hypnotized scissors. Focus Secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews