Menu English Ukrainian russian Home

Free technical library for hobbyists and professionals Free technical library


Job description for video engineer. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article Comments on the article

I. General Provisions

  1. A video engineer belongs to the category of specialists, is hired and dismissed by the order of the director of the enterprise on the proposal of the technical director.
  2. A person who has a higher professional (technical) education and at least 2 years of experience in the specialty in engineering positions and at least 3 years of experience in the specialty in engineering positions is appointed to the position of video engineer.
  3. The Video Engineer reports directly to the Technical Director.
  4. During the absence of a video engineer (business trip, vacation, illness, etc.), his duties are performed by a duly appointed person who is fully responsible for their high-quality and timely performance.
  5. In his work, the video engineer is guided by:
  • rules for the operation of technical means of television and radio broadcasting;
  • normative acts and methodological materials on the issues of the work performed;
  • the charter of the enterprise;
  • labor regulations;
  • orders and orders of the director of the enterprise and the immediate supervisor;
  • this Job Description.
  1. The video engineer must know:
  • resolutions, orders, orders, methodological and regulatory materials for the operation of special technical means, electronic computers, communications (hereinafter referred to as the "Equipment");
  • types of software;
  • prospects for the technical development of the enterprise;
  • technical characteristics, design features, operating modes and rules for the technical operation of equipment used to ensure the operation of a television and radio company;
  • a unified system of preventive maintenance and rational operation of "Equipment";
  • organization and technology of repair work;
  • the procedure for drawing up applications for computing resources, equipment, materials, spare parts, tools;
  • methods of installation, adjustment, adjustment and repair of electronic computing equipment and special technical means;
  • fundamentals of production technology of the enterprise;
  • requirements for the organization of labor in the operation, repair and modernization of electronic computing equipment and special technical means, best practices for their operation and repair;
  • rules for the delivery of equipment for repair and acceptance after repair;
  • fundamentals of economics, organization of production, labor and management;
  • main issues of labor legislation;
  • rules and regulations of labor protection.

II. Official duties

  1. Ensure the smooth operation, proper operation, repair and modernization of the "Equipment".
  2. Determine the need for production in the required technical resources, prepare the necessary justifications for technical re-equipment, development of technical facilities, reconstruction and modernization of systems for archiving and storing information in electronic form.
  3. Draw up applications for the purchase of "Equipment", materials, spare parts necessary for the operation of technical means, perform calculations with the necessary justifications for measures to save material resources, participate in the development of consumption rates for spare parts and materials, the operating mode of the enterprise's divisions.
  4. Monitor compliance with the rules for the operation of the "Equipment".
  5. Draw up schedules for routine work on the repair and inspection of "Equipment", carry out certification of technical resources installed at the enterprise.
  6. Participate in the design and installation of "Equipment" to ensure the efficient operation of the enterprise.
  7. Participate in the consideration of the causes of equipment accidents and develop measures to prevent them, create safe working conditions.
  8. Organize routine inspection and testing of "Equipment".
  9. To carry out technical supervision of the control and measuring procedures used at the enterprise for acceptance into operation, verification and certification of the organization of state supervision.
  10. Monitor compliance with the instructions for operation, maintenance and supervision of the "Equipment".
  11. Participate in the development and implementation of standards and specifications for subordinate "Equipment".
  12. Prepare the necessary materials for the conclusion of contracts for the repair of "Equipment" with contractors.
  13. To exercise control over the implementation of capital, current and minor repairs of the "Equipment".
  14. To study and summarize the best domestic and foreign experience in the rational use of "Equipment".
  15. Ensure compliance with the rules and norms of labor protection during the operation and repair of "Equipment" and archiving systems.
  16. Prepare reports in accordance with approved forms and indicators.
  17. Carry out individual official assignments of your immediate supervisor.

III. Rights

The video engineer has the right:

  1. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
  2. Submit proposals for the improvement of the work related to the duties provided for in this instruction for consideration by the management of the enterprise.
  3. Receive from the heads of structural divisions, specialists information and documents on issues within its competence.
  4. Involve specialists from all structural divisions of the enterprise to solve the duties assigned to it (if it is provided for by the regulations on structural divisions, if not, with the permission of the head of the enterprise).
  5. Require the management of the enterprise to assist in the performance of their duties and the exercise of rights.

IV. A responsibility

The video engineer is responsible for:

  1. For non-performance (improper performance) of their duties provided for by this instruction, in accordance with the current labor legislation of Ukraine.
  2. For offenses committed in the course of carrying out their activities, in accordance with the current administrative, criminal and civil legislation of Ukraine.
  3. For causing material damage in accordance with the current legislation of Ukraine.

 We recommend interesting articles Section Job descriptions:

▪ Assembly fitter of radio-electronic equipment and instruments. Job description

▪ Codifier. Job description

▪ Head of the regime-secret department. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

The value of the Casimir torque is measured 07.01.2019

Researchers from the University of Maryland for the first time in the history of science managed to measure the value of the physical effect, the existence of which was predicted 40 years ago and which is called the Casimir torque. When two tiny particles, no larger than one micron in size, are placed very close to each other in a deep vacuum, they are attracted to each other, the effect of this attraction is known as the Casimir effect. The Casimir torque is related to this phenomenon and is caused by the same quantum electromagnetic effects. Under the influence of the Casimir torque, a tiny particle near the surface of a metallic material in a vacuum begins to rotate. But the force created by the Casimir torque is so small that until recently it was very difficult to measure its absolute value.

To carry out the measurements, scientists had to create a complex setup, the sensitive elements of which are liquid crystals, crystals similar to those used in liquid crystal displays. The liquid crystals were located only 10 nanometers away from the surface of a larger solid crystal. The liquid crystal motion recorder was a special polarizing microscope, which can be used to accurately measure the position of the optical axis of liquid crystals.

Liquid crystals are ideal sensors, as they are extremely sensitive to the effects of any external forces, and the fact that they polarize the light passing through them makes it possible to accurately determine their position at any time. A polarizing microscope sees each pixel of liquid crystals as a light or dark dot, depending on the position of the axis of the crystals themselves. And any change in this position leads to a change in the brightness of the pixel, which is instantly recorded by the microscope.

The scientists used several different types of particles and crystals to measure the precise forces generated by Casimir's torque. These forces have been found to be highly dependent on the kind of material the particles are made from, and each material has its own unique "signature" in terms of these forces.

Knowing the exact values ​​of the forces associated with the Casimir effect is important not only from a scientific point of view. The Casimir effect and torque forces can be used to power nano-sized parts and assemblies of tiny machines, which, in turn, can be assemblies of machines and mechanisms of a larger scale. "In traditional machines, torque is generated and transmitted using motors, crankshafts, cardan shafts, etc." - the researchers write, - "The Casimir torque can do all the same things at the nanoscale level."

Other interesting news:

▪ GPS beacons for drug bottles

▪ Series of ceramic diodes CeraDiode

▪ Biofuels won't save the planet

▪ Digital Polaroid

▪ Chip MediaTek Helio P22

News feed of science and technology, new electronics

 

Interesting materials of the Free Technical Library:

▪ section of the site Audio Art. Article selection

▪ Article Audit. Lecture notes

▪ article How are Mendel's laws used in paternity tests? Detailed answer

▪ article Iron deficiency anemia (anemia). Health care

▪ article Retarder for turning on an incandescent lamp. Encyclopedia of radio electronics and electrical engineering

▪ article Charger with boost converter. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

Name:


Email (optional):


A comment:





All languages ​​of this page

Home page | Library | Articles | Website map | Site Reviews

www.diagram.com.ua

www.diagram.com.ua
2000-2024