Job description for a REAiP fitter

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a REAiP fitter. Full Document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The fitter-assembler of radio-electronic equipment and devices (hereinafter referred to as the fitter-assembler of REAiP) belongs to the category of basic workers.
A person with primary vocational education is accepted for the position of a REAiP fitter.
The REAiP fitter is hired and released from it by order of the director on the proposal of the head of the shop (with the consent of the site foreman).
The REAiP fitter reports directly to the foreman of the site.
The main task of the REAiP fitter is to assemble with mechanical adjustment of radio-electronic equipment according to drawings, specifications, with the provision of the established quality of work in the volumes established by labor standards.
The REAiP fitter carries out his work on the basis of the production load plan of the site, the normalized task and this Job Description.
During the absence of a REAiP fitter (temporary disability, vacation, business trip and other good reasons), his scope of work is performed by a worker of the site, corresponding to the profession and qualifications.
The REAiP fitter-assembler works on a piece-bonus system.
A person with primary vocational education is accepted for the position of a REAiP fitter.
The ReAiP fitter in his work is guided by:

knowledge of the quality policy adopted in production;
device, principle of operation of the equipment used in the work and methods for its adjustment;
purpose, device and principle of operation of the assembled equipment;
basic information about processing parameters;
fundamentals of electrical and radio engineering;
the technological process of the work performed;
rules for the technical operation and maintenance of equipment, fixtures and tools with which he works or which he serves, the causes of current problems during the performance of work and methods for their elimination;
economy mode and rational use of material resources;
norms of consumption of energy, raw materials and materials for the work performed;
rational organization of labor at their workplace;
requirements for the quality of work performed, including related operations or processes;
types of marriage, the causes that give rise to it, and ways to prevent and eliminate it;
your professional instruction;
internal labor regulations adopted at the workplace;
rules and regulations of labor protection, environmental protection and fire safety;
safe methods and sanitary and hygienic working conditions, basic means and techniques for preventing and extinguishing fires at the workplace;
instructions on labor protection: general rules on labor protection, fire safety and first aid in case of electric shock, instructions on labor protection.

II. Official duties

The fitter-assembler of REAiP is obliged to:

Carry out the assembly of car audio:

connect parts with rivets, screws (with marking and drilling holes);
perform the installation of nodes with the provision of rigid fixation and proper interaction of the assembled products;

Check the parts of the assembled products: mechanical and acoustic:

check the mechanical part of the assembled products using instrumentation and tools.
check the acoustic part of the assembled products.

Eliminate detected defects.
Perform work related to the acceptance and delivery of shifts:

perform work related to the acceptance and delivery of shifts;
timely prepare for work and cleaning their workplace, equipment, tools, fixtures and keep them in proper condition;

Carry out instructions from the immediate supervisor.
Undergo periodic medical check-ups.
Comply with the rules and regulations of labor protection:

comply with the rules and regulations of labor protection;
comply with the requirements of the labor protection management system in force at the workplace;
comply with the rules and regulations of environmental protection;
comply with the rules and regulations of fire safety;

Comply with internal labor regulations.

III. Rights

The REAiP fitter-assembler has the right to:

Get acquainted with the administrative documents of production, orders of the head of the shop, relating to his activities;
Make proposals for improving the work related to the performance of duties according to professional instructions;
Inform the foreman about all the shortcomings identified in the process of fulfilling his duties, make proposals for their elimination;
Require the master to timely determine the scope of work and indicate the timing of its implementation;

IV. A responsibility

The REAiP fitter is responsible for:

Improper performance or failure to perform the duties assigned to him.
Untimely and poor-quality execution of planned work and operational tasks.
Low production and labor discipline.
Untimely passage of periodic medical examinations.
Failure to comply with internal labor regulations.
Failure to comply with the rules and regulations of labor protection and environmental protection.
Failure to comply with fire safety regulations.

We recommend interesting articles Section Job descriptions:

▪ Tax accountant. Job description

▪ Purchasing Manager. Job description

▪ Heater (welder) of metal. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

braking heat 21.02.2012

In the mid-1990s, an anomaly was noticed in the movement of two American spacecraft - Pioneer-10 and Pioneer-11: it turned out that they were flying a little slower than expected by all theories of celestial mechanics. In each subsequent second, the speed decreases by 0,00000009 centimeters per second compared to the previous period of time. It seems very little, but over 30 years of flight, the deviation from the calculated trajectories amounted to 400 thousand kilometers.

The NASA space agency hid this information for a long time, as it defied explanation and thus seemed to compromise the professionalism of its employees. When the data nevertheless had to be published, physicists rushed to offer various hypotheses to explain the strange behavior of space probes. They talked about mysterious dark matter, even more mysterious dark energy, about the error in Newton's law of gravity, about the fallacy of the general theory of relativity ...

German physicist Klaus Lemmerzahl of the University of Bremen and his graduate student Benny Rivers offer a simple explanation for the puzzle: The Pioneers are slowed down by the heat they radiate in the direction of their flight. Having built a model of a spacecraft on a computer from 50 parts and having studied the heat balance and heat flows in the model, physicists came to the conclusion that heat from two isotope batteries on plutonium-238, which supply energy to the entire apparatus, is radiated outward unevenly.

Mostly, although with a slight margin, it comes out of the side of the Pioneer that faces forward. The advantage is small, and the energy of photons in the infrared part of the spectrum is small, but a slight deceleration has accumulated over decades of flight. By the way, over time, it still decreases - exactly at the pace at which plutonium decays and heat release weakens.

Other interesting news:

▪ Global warming affects the size of birds

▪ Vertiv Edge Lithium-Ion UPS

▪ Ultra-precise tangled atomic clock

▪ Allen-Bradley CompactLogix 1769 programmable controller

▪ The impact of fast food on sleep and memory of adolescents

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Winged words, phraseological units. Selection of articles

▪ article by Marcel Duchamp. Famous aphorisms

▪ article Where did grapefruits originate? Detailed answer

▪ article Flat-leaved vanilla. Legends, cultivation, methods of application

▪ article Simulator of meow sounds. Encyclopedia of radio electronics and electrical engineering

▪ article Low-power bipolar stabilizer, 220 volts 200 milliamps. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews