Job description for a mechanic for the repair of instrumentation and automation

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a mechanic for the repair of instrumentation. Full Document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The instrumentation repairman is directly subordinate to _______.
The instrumentation repairman follows the instructions of _______.
The instrumentation repairman replaces _______.
The instrumentation repairman is replaced by _______.
The instrumentation repairman is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
Mechanic for the repair of instrumentation and automation is the responsible executor of work on the repair and maintenance of all instrumentation and automation. He is responsible for the quality of all repairs and trouble-free operation of the equipment.
When transferring to another job or dismissal from the position, the Mechanic for the repair of instrumentation and automation is responsible for the proper and timely handing over of cases to the person entering this position, and in the absence of such, to the person replacing him or directly to his supervisor.

II. Official duties

The instrumentation repairman is obliged to:

Strictly follow the rules of safety and labor protection, take all necessary measures to prevent accidents.
Draw up schedules for the repair and preventive inspection of instrumentation and control equipment.
Timely, efficiently and with great responsibility to carry out preventive maintenance and repair of devices and means of protective automation in the compressor shop, refrigeration equipment of the ice cream factory and charging units of the transport shop.
Keep a log of inspections and repairs of control and measuring equipment in accordance with the deadlines.
Observe production and labor discipline, cleanliness and order in the workplace.

III. Rights

The instrumentation and control engineer has the right to:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The instrumentation engineer is responsible for:

improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine;
violation of the rules and regulations governing the activities of the enterprise;
offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine;
infliction of material damage - within the limits determined by the current labor and civil legislation of Ukraine;
compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information;
compliance with internal regulations, safety and fire safety rules.

We recommend interesting articles Section Job descriptions:

▪ PC operator. Job description

▪ Head of Sales Department. Job description

▪ Automatic lines adjuster. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Efficient recovery of cobalt from depleted batteries 03.04.2019

Sumitomo Metal has developed an efficient process to recover cobalt from depleted batteries for electric vehicles and beyond. The technology will make it possible in the future to avoid or mitigate the shortage of this extremely rare metal on Earth, without which the manufacture of rechargeable batteries is unthinkable today.

Cobalt is used to make cathodes for lithium-ion batteries, ensuring the stability of these cells. Sumitomo Metal, for example, obtains cobalt-bearing ore from Southeast Asia. The company processes the ore to extract cobalt in Japan, and then supplies the pure metal to battery manufacturers such as Panasonic and other companies that supply batteries in the US for Tesla cars.

About 60% of cobalt is mined in the Democratic Republic of the Congo. Mines in the Congo are owned by American and Swiss companies, but in recent years they have been actively bought by the Chinese. So, in 2016, the Chinese Molybdenum bought a significant part of the shares in Tenke Fungurume from the American company Freeport-McMoRan, which owns cobalt mines in the Congo, and in 2017 the GEM company from Shanghai bought the mines from the Swiss Glencore. The limitation of cobalt mining sites, analysts believe, will lead to a shortage of this metal as early as 2022, so the extraction of cobalt from recycled materials may push this unfortunate moment forward into the future.

To explore the possibilities of a new process for recovering cobalt from used batteries, Sumitomo Metal has started setting up a pilot plant in Ehime Prefecture on the island of Shikoku. The proposed process allows for the rapid extraction of cobalt in a pure enough form to be immediately returned to battery manufacturers. By the way, in addition to cobalt, copper and nickel will also be extracted during the processing of batteries, which will only add advantages to the new method. If the pilot production proves to be successful, Sumitomo Metal will start industrial processing of batteries to extract cobalt in 2021.

Other interesting news:

▪ Chips help assemble furniture

▪ Probiotic capable of destroying antibiotic-resistant bacteria

▪ Sleep protects against colds

▪ All Optical Switch

▪ SanDisk Extreme Pro CFast 2.0 Memory Cards

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Note to the student. Article selection

▪ article And instead of a lamp, a plasma motor. video art

▪ article Who Invented Plastic? Detailed answer

▪ article Coffin upholsterer. Standard instruction on labor protection

▪ article Ozonizers for home. Encyclopedia of radio electronics and electrical engineering

▪ article Chip KXA058 - FM path. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews