Engineer-adjuster of radio-electronic equipment and devices

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for an engineer-adjuster of radio-electronic equipment and devices. Full Document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The engineer-adjuster of radio-electronic equipment and devices (hereinafter referred to as the engineer-regulator of the REAiP) belongs to the category of the main specialists of the production site.
A person with a higher education is accepted for the position of a Regulatory Engineer of REAiP.
The REAiP control engineer is hired and released from it by order of the director on the proposal of the head of the workshop (with the consent of the site foreman).
The Regulatory Engineer reports directly to the Site Foreman.
The main task of the REAiP control engineer is the assembly with mechanical adjustment of complex assemblies, radio-electronic equipment according to drawings, specifications, ensuring the established quality of work in the volumes established by labor standards.
The REAiP Regulatory Engineer carries out his work on the basis of the production load plan for the site, the normalized task and this professional instruction.
During the absence of the REAiP Regulator Engineer (temporary disability, vacation, business trip and other good reasons), his scope of work is performed by a worker of the section corresponding to the profession and qualification.
Regulator engineer REAiP works on a piece-bonus system.
A person with a higher education is accepted for the position of Regulatory Engineer of REAiP.
The Regulatory Engineer of REA IP in his work is guided by:

knowledge of the quality policy adopted in production;
device, principle of operation of the equipment used in the work and methods for its adjustment;
purpose, device and principle of operation of the assembled equipment;
ways and methods of mechanical adjustment of the assembled equipment;
basic information about processing parameters;
basic requirements for the assembly of boards, the implementation of improvements on them;
fundamentals of electrical and radio engineering;
the technological process of the work performed;
rules for the technical operation and maintenance of equipment, fixtures and tools with which he works or which he serves, the causes of current problems during the performance of work and methods for their elimination;
economy mode and rational use of material resources;
norms of consumption of energy, raw materials and materials for the work performed;
rational organization of labor at their workplace;
requirements for the quality of work performed, including related operations or processes;
types of marriage, the causes that give rise to it, and ways to prevent and eliminate it;
your professional instruction;
internal labor regulations adopted at the workplace;
rules and regulations of labor protection, environmental protection and fire safety;
safe methods and sanitary and hygienic working conditions, basic means and techniques for preventing and extinguishing fires at the workplace;
instructions on labor protection: "General rules for labor protection, fire safety and first aid in case of electric shock", "Instruction on labor protection for the engineer-adjuster of REAiP".

II. Official duties

The REAiP Regulator Engineer is obliged to:

Carry out the assembly of car audio:

perform assembly with mechanical adjustment of complex units, blocks, modules on the boards of electronic equipment;
install electrical radio elements on the boards and fasten them by bending the leads;
connect parts with rivets, screws (with marking and drilling holes);
perform the installation of nodes with the provision of rigid fixation and proper interaction of the assembled products;

Check the parts of the assembled products: mechanical and acoustic:

recheck the mechanical part of the assembled products using instrumentation and tools;
check the acoustic part of the assembled products.

Eliminate detected defects:

detect faults, eliminate defects;
install stickers denoting functions.

Cable laying, connection and continuity:

laying cables, connecting them and dialing;

Perform work related to the acceptance and delivery of shifts:

perform work related to the acceptance and delivery of shifts;
timely preparation for work and cleaning of their workplace, equipment, tools, fixtures and keeping them in proper condition;
maintenance of the established technical documentation: passports, wiring diagrams.

Carry out instructions from the immediate supervisor.
Undergo periodic medical check-ups.
Comply with the rules and regulations of labor protection:

comply with the rules and regulations of labor protection;
comply with the requirements of the labor protection management system in force at the workplace;
comply with the rules and regulations of environmental protection;
comply with the rules and regulations of fire safety;
comply with the rules of internal labor regulations.

III. Rights

The REAiP Regulator Engineer has the right to:

Get acquainted with the administrative documents of production, orders of the head of the shop, relating to his activities;
Make proposals for improving the work related to the performance of duties according to professional instructions;
Inform the foreman about all the shortcomings identified in the process of fulfilling his duties, make proposals for their elimination;
Require the master to timely determine the scope of work and indicate the timing of its implementation.

IV. A responsibility

The REAiP Regulatory Engineer is responsible for:

Improper performance or failure to perform the duties assigned to him.
Untimely and poor-quality execution of planned work and operational tasks.
Low production and labor discipline.
Untimely passage of periodic medical examinations.
Failure to comply with internal labor regulations.
Failure to comply with the rules and regulations of labor protection and environmental protection.
Failure to comply with fire safety regulations.

We recommend interesting articles Section Job descriptions:

▪ Creative director. Job description

▪ Marketing Manager. Job description

▪ Crane operator. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

wifi on sheep 28.12.2014

British researchers plan to equip sheep with Wi-Fi hotspots to bring high-speed Internet access to rural areas. Sheep are no strangers to wearing equipment: in the summer of 2014, they played the role of operators in the Tour de France.

A team of researchers led by Lancaster University professor Gordon Blair plans to explore the possibility of installing Wi-Fi hotspots on sheep farms in British Wales, reports The Daily Mail.

According to the researchers, this can solve the problem of providing high-speed Internet access to remote rural areas. The group received 171,5 thousand pounds sterling (about 14,5 million) for this project.

Researchers suggest that it would be possible to equip remote areas with Internet access by turning sheep grazing in wide open spaces into a chain of wireless signal transceivers.

"This could address the typically slow access speeds and poor network coverage in much of the UK's rural areas," notes The Daily Mail.

Wi-Fi modules can be integrated into digital collars - devices for monitoring the movement of sheep that farmers use.

We add that earlier sheep were already used as a kind of transport for equipment. In July 2014, these animals were equipped with cameras to film the prestigious Tour de France cycling race held in Yorkshire. The cameras on the sheep were controlled remotely.

In addition to the Internet, Blair's team will study the problems of pollution, floods and droughts. Within the framework of the project, water level sensors will be installed in the rivers on the banks and precipitation sensors. A similar system has been installed in Honduras by researchers at the Massachusetts Institute of Technology and Microsoft.

The authors of the project will try to implement one of the basic principles of the "Internet of things" - the ability of electronic devices to communicate with each other and send data to the Internet without human intervention. The researchers note that in rural areas such a concept is more difficult to organize due to the more complex landscape. However, the results are obvious - high-quality network coverage of remote areas and the availability of all kinds of sensors will help to cope with natural disasters and increase the efficiency of agriculture.

Other interesting news:

▪ Samsung processors with neural network

▪ Space data transmission using a laser

▪ Human powered bioelectronics

▪ Artificial retina developed

▪ Smart Button for IoT

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Reference materials. Article selection

▪ Zirlich-Manirlich article. Popular expression

▪ article What is the largest carnivore that has ever existed? Detailed answer

▪ article The operator of the smoke plant. Job description

▪ article Control system of micro hydroelectric power plants. Encyclopedia of radio electronics and electrical engineering

▪ The handkerchief is tied up again. Focus Secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews