OCCUPATIONAL SAFETY AND HEALTH
Instructions for labor protection when working on fiber-optic communication cables Occupational Safety and Health / Standard instructions for labor protection Safe Operation 1. General requirements for labor protection 1.1. Persons at least 18 years of age who have passed a medical examination, special training, practical training, have an electrical safety group, and have the appropriate qualifications in accordance with the tariff and qualification directory are allowed to work on fiber-optic communication cables. Periodic medical examinations of an electrical equipment repairman must take place once every 1 months. 1.2. Electricians who have been instructed in safety precautions and have learned safe working methods are allowed to work independently on fiber-optic communication cables. Personnel when performing work independently on electrical installations with voltage up to 1000 V must have at least safety group III, and more than 1000 V - group IV. 1.3. In the course of work, within the time limits set at the enterprise, the electrician must undergo safety briefing, coursework for an 18-hour program and pass exams on knowledge of the rules for the technical operation of consumer electrical installations and safety regulations for the operation of consumer electrical installations. 1.4. When working on fiber-optic communication cables, personnel must know the terms for testing protective equipment and devices, the rules for their operation and maintenance, and be able to use them. It is not allowed to use protective equipment and devices with an expired test period. 1.5. The electrician during the period of work must use personal protective equipment (overalls, safety shoes, gloves, glasses, etc.) issued by the administration of the enterprise. 1.6 Each employee, in accordance with Article 4 d of the Fundamentals of the Legislation of the Russian Federation on Labor Protection, has the right to refuse to perform work without any unreasonable consequences for him in the event of an immediate danger to his life and health until this danger is eliminated. 2. Labor protection requirements before starting work 2.1. When working on fiber-optic communication cables, personnel must check:
2.2. When working, use only serviceable, dry and clean tools and fixtures;
2.4. To carry the tool, the worker should use a special bag or a lightweight portable box. Carrying tools in pockets is prohibited. 2.5. If a malfunction of equipment, tools, accessories for the workplace is detected, both before starting work and during work, inform the foreman and do not start work until the troubleshooting. Defective tools must not be used. 3. Labor protection requirements during work 3.1. Equipment and devices containing a laser generator must comply with the requirements of GOST 12.1.040-83. 3.2. A laser hazard label must be affixed to the enclosure of the laser generator. 3.3. The laser generator must be of a closed type. 3.4. During operation of the equipment, the optical output of the blocks, if an optical cable is not connected to them, must be closed with plugs. 3.5. Installation and replacement of units containing a laser generator must be carried out only when the voltage is removed. 3.6. On the equipment (unit) where the laser generator is installed, the laser class must be indicated in accordance with GOST 12.1.040-83. Depending on the class, the order of its maintenance must be determined. 3.7. Service personnel are prohibited from:
4. Labor protection requirements in emergency situations 4.1. In case of any accident or emergencies that can lead to an accident and an accident, the electrician is obliged to immediately take all measures within his power to prevent the possibility of damage (destruction) of the object and eliminate the danger to people's lives. At the same time, report the incident to the foreman or immediate supervisor of the work. 5. Labor protection requirements at the end of work 5.1. Upon completion of work on fiber optic cables:
We recommend interesting articles Section Standard instructions for labor protection: ▪ Tire repair work. Standard instruction on labor protection ▪ Work on the processing of book blocks on the KOLBUS line. Standard instruction on labor protection See other articles Section Standard instructions for labor protection. Read and write useful comments on this article. Latest news of science and technology, new electronics: Artificial leather for touch emulation
15.04.2024 Petgugu Global cat litter
15.04.2024 The attractiveness of caring men
14.04.2024
Other interesting news: ▪ Schizophrenia-causing cells identified ▪ Computer mouse controlled by mouth ▪ LMP8100 Programmable Gain Amplifier News feed of science and technology, new electronics
Interesting materials of the Free Technical Library: ▪ section of the site Personal transport: land, water, air. Article selection ▪ article by Philip Kotler. Famous aphorisms ▪ article Which of the chemical elements is the densest? Detailed answer ▪ article Water supply in the Arctic. Travel Tips
Leave your comment on this article: All languages of this page Home page | Library | Articles | Website map | Site Reviews www.diagram.com.ua |