OCCUPATIONAL SAFETY AND HEALTH
Instructions for labor protection when working on starter plants Occupational Safety and Health / Standard instructions for labor protection Safe Operation 1. General safety requirements 1.1. Physically healthy people who do not have medical contraindications, who have undergone industrial training, introductory and primary instruction at the workplace, must be allowed to work on the RZ-034-0,35 and RZ-034-0,63 starter plants, and must also undergo hygienic training and pass the test 1 time in 2 years according to the established program. 1.2. Personnel working on starter plants should be familiar with:
1.3. Personnel admitted to work must be provided and familiarized against receipt with the instruction on labor protection 2. Safety requirements before starting work. 2.1. Wear the proper attire. 2.2. Check the presence and serviceability of the grounding of the starter plants and make sure that it is in good condition and test it at idle, inform the management if damage or malfunction is found. 2.3. Check that the aisles are not obstructed. 2.4. To ensure safe operation, it is necessary to carry out a weekly preventive inspection of devices and equipment that do not have a regulated maintenance period. 2.5. Movable and rotating parts of the equipment must have protective covers and guards that exclude the possibility of injury to operating personnel. 3. Safety requirements during work. 3.1. Do only the work assigned to you 3.2. Be careful not to distract yourself and do not distract others from work. 3.3. Do not allow unauthorized persons to work on the starter plants. 3.4. Starting the starter plants to work, making sure that there is no danger to others. 3.5. If a malfunction is detected in the operation of the starter plant, stop it, inform the master. Switch on the starter plant, after troubleshooting, only in the presence of the master and locksmith 3.6. Cleaning, washing starter plants only when the equipment is completely stopped and the electric current is turned off. 3.7. All faucets and valves in the installation must open and close freely. 3.8. During the operation of the unit, it is forbidden to place foreign objects and tools. 3.9. In order to prevent clogging of the washing head and breakage of the agitator, the washing head must be installed only before washing the starter and removed after washing. It is forbidden to turn off the stirrer drive while the starter is being washed. 3.10. Keep the workplace clean, clean up spilled liquids in a timely manner, and eliminate the slipperiness of the floor. 4. Safety requirements in emergency situations 4.1. If voltage is detected on the metal parts of the equipment (sensation of electric current), the electric motor is running in two phases (humming), the ground wire is broken, you should stop the machine and immediately report this to the management. 4.2. If a malfunction in the operation of the equipment, a spontaneous stop, an accident is detected, it is necessary to turn off the power supply, inform the responsible person about it and do not turn it on until the malfunction is eliminated. If acid gets on the skin, immediately wash off with water and 3% alkali solution. 4.3. In case of injury, contact the first-aid post and notify the management. 4.4. If a fire is detected, it is necessary to call the fire brigade by phone 01, notify the management. 5. Safety requirements at the end of work 5.1. Upon completion of work, all equipment and mechanisms are transferred to a position that excludes the possibility of their launch by unauthorized persons, the power supply is turned off, the equipment is wiped. Sanitization, disassembly, cleaning and washing are carried out only after disconnecting the equipment from the mains. 5.2. Take off overalls, report all remarks in the operation of the installation to your supervisor, do not repair the equipment yourself, take a shower. We recommend interesting articles Section Standard instructions for labor protection: ▪ Projectionist. Standard instruction on labor protection ▪ Car painter. Standard instruction on labor protection ▪ Finisher working on boards on drum polishing machines. Standard instruction on labor protection See other articles Section Standard instructions for labor protection. Read and write useful comments on this article. Latest news of science and technology, new electronics: Artificial leather for touch emulation
15.04.2024 Petgugu Global cat litter
15.04.2024 The attractiveness of caring men
14.04.2024
Other interesting news: ▪ Breathe deep, you're excited ▪ Multicellular organisms have grown old ▪ Samsung is developing a 600-megapixel sensor ▪ NOKIA has created a phone for athletes News feed of science and technology, new electronics
Interesting materials of the Free Technical Library: ▪ section of the site Normative documentation on labor protection. Article selection ▪ article by Marcel Proust. Famous aphorisms ▪ How was the “Viennese system” created and how was the Holy Alliance formed? Detailed answer ▪ Selenicereus article. Legends, cultivation, methods of application ▪ article Heating beehives. Encyclopedia of radio electronics and electrical engineering ▪ article Babies from the stroller. Focus Secret
Leave your comment on this article: All languages of this page Home page | Library | Articles | Website map | Site Reviews www.diagram.com.ua |