Menu English Ukrainian russian Home

Free technical library for hobbyists and professionals Free technical library


Instruction on labor protection for a seamstress

Occupational Safety and Health

Occupational Safety and Health / Standard instructions for labor protection

Comments on the article Comments on the article

Safe Operation

1. General safety requirements

1.1. For independent work as a seamstress, men and women who have passed:

  • induction training;
  • fire safety briefing;
  • initial briefing at the workplace;
  • training in safe working methods and techniques for at least 10 hours;
  • instructing on electrical safety at the workplace and checking the assimilation of its content. Persons who do not have medical contraindications may be accepted to perform the duties of a storekeeper of a logistics warehouse.

1.2. The seamstress must pass:

  • repeated briefing on labor safety at the workplace at least every three months;
  • unscheduled briefing - in case of a change in the technological process or labor protection rules, replacement or modernization of production equipment, fixtures and tools, changes in working conditions and organization, in case of violations of labor protection instructions, breaks in work for more than 60 calendar days (for work, to which are subject to increased security requirements - 30 calendar days);
  • dispensary medical examination - at least once every 2 years.

1.3. The seamstress must:

  • comply with the internal labor regulations established at the enterprise;
  • comply with the requirements of this manual, fire safety instructions, electrical safety instructions;
  • comply with the requirements for the operation of equipment;
  • use for its intended purpose and take care of the issued personal protective equipment.

1.4. The seamstress must:

  • be able to provide first (pre-medical) assistance to the victim in an accident;
  • perform only the assigned work and not transfer it to others without the permission of the foreman or head of the workshop;
  • during work, be attentive, not be distracted and not distract others, do not allow persons who are not related to work to the workplace;
  • keep the workplace clean and tidy.

1.5. The seamstress must know and follow the rules of personal hygiene. Eat, smoke, rest only in specially designated areas and places. Drink water only from specially designed installations.

1.6. If any malfunctions of equipment, fixtures, tools and other shortcomings or hazards are found in the workplace, immediately inform the foreman or head of the workshop. work can only be started with their permission after the elimination of all deficiencies.

1.8. In accordance with the "Model norms for the free issuance of personal protective equipment to workers and employees of textile and light industry enterprises", a seamstress must be provided with an apron with a bib, wear period is 12 months.

2. Safety requirements before starting work

2.1. Inspect overalls and other personal protective equipment, put on serviceable overalls.

2.2. Make sure that the machine is in good condition (idling), its starting and braking devices, the presence and serviceability of protective and safety devices.

2.3. Check the correct installation of the needle, looper, pressing and drive disks.

3. Safety requirements during work

3.1. When working on the machine, the seamstress should sit on the entire area of ​​​​the chair, stretch the leg forward and put it on the starter pedal, not leaning close to the machine, place the workpiece at a distance of at least 30-40 cm from the eyes, the elbows of the hands should be on the same level with the surface table, and the position of the hands relative to the needle should exclude the puncture of the fingers by the needle.

3.2. During work, the seamstress must:

  • threading and changing needles only when the machine is disconnected from the mains;
  • put the machine into operation by smoothly pressing the starting pedal, without jerking;
  • lay a line, holding the product with both hands on both sides of the needle, in order to avoid puncturing the fingers with a needle;
  • keep fingers on the edge of the platform when working on the Overlock machine;
  • remove threads, pieces of fabric that have fallen into the drive mechanism only when the machine is turned off;
  • tools (scissors, screwdrivers) should be stored in a specially designated place;
  • keep the workplace and aisles clean and tidy, do not clutter them;
  • clean and lubricate the machine only when it is disconnected from the mains;
  • disconnect the machine from the network during breaks in work.

Switch off the drive motor in the event of a malfunction and inform the foreman. Start work only after troubleshooting.

3.3. When working with an electric iron, do not allow the iron to fall and hit, twist the cable and touch the surface of the iron, form loops and knots, do not overmoisten the product in order to avoid burns to the hands. Do not allow the iron to overheat.

3.4. The seamstress is prohibited;

  • lean close to the machine while working to avoid catching hair and being hit by the thread take-up;
  • touch the moving part of a running machine;
  • open and remove safety devices, fences;
  • throw unusable and broken needles on the floor;
  • place scissors or other objects near the rotating parts of the machine;
  • stick spare needles into electrical wires;
  • brake the flywheel or speed it up by hand.

4. Safety requirements in emergency situations

4.1. In case of an emergency, stop work, leave the danger zone, if necessary, remove people nearby.

4.2. In the event of a fire, immediately call the fire brigade by phone 01, remove people to a safe place. Report the fire to management.

4.3. Provide first aid to victims in case of injury and call an ambulance or send the victim to a first-aid post, inform the head.

5. Safety requirements at the end of work

5.1. Tidy up the workplace.

5.2. Places of production of works should be subjected to thorough cleaning, washing.

5.3. Remove and put away protective clothing and other protective equipment in the place provided for this.

5.4. Wash your face and hands.

 We recommend interesting articles Section Standard instructions for labor protection:

▪ Fire safety in the institution. Standard instruction on labor protection

▪ Excavator driver. Standard instruction on labor protection

▪ A woodworking finisher who applies finishing materials in pneumatic spray booths. Standard instruction on labor protection

See other articles Section Standard instructions for labor protection.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Artificial leather for touch emulation 15.04.2024

In a modern technology world where distance is becoming increasingly commonplace, maintaining connection and a sense of closeness is important. Recent developments in artificial skin by German scientists from Saarland University represent a new era in virtual interactions. German researchers from Saarland University have developed ultra-thin films that can transmit the sensation of touch over a distance. This cutting-edge technology provides new opportunities for virtual communication, especially for those who find themselves far from their loved ones. The ultra-thin films developed by the researchers, just 50 micrometers thick, can be integrated into textiles and worn like a second skin. These films act as sensors that recognize tactile signals from mom or dad, and as actuators that transmit these movements to the baby. Parents' touch to the fabric activates sensors that react to pressure and deform the ultra-thin film. This ... >>

Petgugu Global cat litter 15.04.2024

Taking care of pets can often be a challenge, especially when it comes to keeping your home clean. A new interesting solution from the Petgugu Global startup has been presented, which will make life easier for cat owners and help them keep their home perfectly clean and tidy. Startup Petgugu Global has unveiled a unique cat toilet that can automatically flush feces, keeping your home clean and fresh. This innovative device is equipped with various smart sensors that monitor your pet's toilet activity and activate to automatically clean after use. The device connects to the sewer system and ensures efficient waste removal without the need for intervention from the owner. Additionally, the toilet has a large flushable storage capacity, making it ideal for multi-cat households. The Petgugu cat litter bowl is designed for use with water-soluble litters and offers a range of additional ... >>

The attractiveness of caring men 14.04.2024

The stereotype that women prefer "bad boys" has long been widespread. However, recent research conducted by British scientists from Monash University offers a new perspective on this issue. They looked at how women responded to men's emotional responsibility and willingness to help others. The study's findings could change our understanding of what makes men attractive to women. A study conducted by scientists from Monash University leads to new findings about men's attractiveness to women. In the experiment, women were shown photographs of men with brief stories about their behavior in various situations, including their reaction to an encounter with a homeless person. Some of the men ignored the homeless man, while others helped him, such as buying him food. A study found that men who showed empathy and kindness were more attractive to women compared to men who showed empathy and kindness. ... >>

Random news from the Archive

MAX6957 LED Display Driver 22.01.2004

The DALLAS SEMICONDUCTOR-MAXIM MAX6957 LED Display Driver provides up to 28 ports for connecting LEDs or seven-segment displays.

The chip has a serial 4-wire interface with a data transfer rate up to 26 MHz (compatible with several serial interface standards). Supply voltage 2,5 to 5,5 V. A 2-wire version of the MAX6956 is available.

Other interesting news:

▪ Electric capsule to stimulate the stomach and improve appetite

▪ The dirtiest sea in the world

▪ Li-ion battery capacity doubled

▪ PCI7621 Flash Media Speed ​​Controller

▪ Microscopic tunable lasers

News feed of science and technology, new electronics

 

Interesting materials of the Free Technical Library:

▪ section of the site Data transfer. Article selection

▪ article What's in my name for you? Popular expression

▪ article What is a tax return? Detailed answer

▪ article Telecommunications electrician in the maintenance of coordinate exchanges. Standard instruction on labor protection

▪ article Magnetic shielding of acoustic systems. Encyclopedia of radio electronics and electrical engineering

▪ article Unusual matches. Focus secret

Leave your comment on this article:

Name:


Email (optional):


A comment:





All languages ​​of this page

Home page | Library | Articles | Website map | Site Reviews

www.diagram.com.ua

www.diagram.com.ua
2000-2024