Instruction on labor protection for a decorator

Free technical library

OCCUPATIONAL SAFETY AND HEALTH
Free library / Occupational Safety and Health / Standard instructions for labor protection

Instructions on labor protection for an artist-decorator. Full document

Occupational Safety and Health

Occupational Safety and Health / Standard instructions for labor protection

Comments on the article

Safe Operation

1. General requirements for labor protection

1.1. Persons at least 18 years of age who have passed a medical examination are allowed to work in the decorative workshop.

1.2. Persons working in the decorative workshop should remember that violation of this labor protection instruction may lead to an accident.

1.3. It is necessary to store paints and varnishes in an unbreakable, hermetically sealed container. Each utensil must have a label indicating the material and its brand.

1.4. It is impossible to store empty containers, cleaning materials and other materials in pantries and paint preparation departments.

1.5. The workplace must be kept clean.

1.6. It is prohibited to perform work without overalls and personal protective equipment.

1.7. It is forbidden to eat at the workplace, smoke and use open fire.

2. Labor protection requirements before starting work

2.1. Conduct an inspection (external) of the workplace, equipment, in the presence of malfunctions, do not start work and report to the immediate supervisor, supervisor.

2.2. Turn on supply and exhaust ventilation.

2.3. Make sure there is adequate lighting in the workplace.

2.4. Check the serviceability of stepladders and ladders. It is forbidden to work on faulty and non-inventory ladders.

3. Labor protection requirements during work

3.1. Mixing and dilution of materials should be carried out in metal buckets, barrels with tight-fitting lids.

3.2. Do not operate electrical equipment if any of the following malfunctions occur:

in case of damage to the plug connection, hose wire;
when smoke or smell characteristic of burning insulation appears;
when there is abnormal noise, knocking, vibration.

3.3. During pneumatic painting, work only with glasses, the working pressure of compressed air should be no more than 4 atm.

3.4. Work from stairs is allowed with the obligatory support of another person.

3.5. It is forbidden to disassemble and make any repairs to electrical equipment.

3.6. It is forbidden to hold the wire (cable) under voltage, touch the rotating parts of the equipment.

3.7. In case of injury, immediately contact the first-aid post and inform the administration about it.

4. Labor protection requirements at the end of work

4.1. Tidy up your workspace.

4.2. It is forbidden to leave contaminated cleaning material in the workshop.

4.3. Report all observed malfunctions and malfunctions to the immediate supervisor.

We recommend interesting articles Section Standard instructions for labor protection:

▪ Electrician for servicing electrical cables up to and above 1000 V. Typical labor protection instruction

▪ Movement on the territory and industrial premises of the motor transport enterprise. Standard instruction on labor protection

▪ Work on a semi-automatic grinding machine for processing spectacle lenses. Standard instruction on labor protection

See other articles Section Standard instructions for labor protection.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Artificial leather for touch emulation 15.04.2024

In a modern technology world where distance is becoming increasingly commonplace, maintaining connection and a sense of closeness is important. Recent developments in artificial skin by German scientists from Saarland University represent a new era in virtual interactions. German researchers from Saarland University have developed ultra-thin films that can transmit the sensation of touch over a distance. This cutting-edge technology provides new opportunities for virtual communication, especially for those who find themselves far from their loved ones. The ultra-thin films developed by the researchers, just 50 micrometers thick, can be integrated into textiles and worn like a second skin. These films act as sensors that recognize tactile signals from mom or dad, and as actuators that transmit these movements to the baby. Parents' touch to the fabric activates sensors that react to pressure and deform the ultra-thin film. This ... >>

Petgugu Global cat litter 15.04.2024

Taking care of pets can often be a challenge, especially when it comes to keeping your home clean. A new interesting solution from the Petgugu Global startup has been presented, which will make life easier for cat owners and help them keep their home perfectly clean and tidy. Startup Petgugu Global has unveiled a unique cat toilet that can automatically flush feces, keeping your home clean and fresh. This innovative device is equipped with various smart sensors that monitor your pet's toilet activity and activate to automatically clean after use. The device connects to the sewer system and ensures efficient waste removal without the need for intervention from the owner. Additionally, the toilet has a large flushable storage capacity, making it ideal for multi-cat households. The Petgugu cat litter bowl is designed for use with water-soluble litters and offers a range of additional ... >>

The attractiveness of caring men 14.04.2024

The stereotype that women prefer "bad boys" has long been widespread. However, recent research conducted by British scientists from Monash University offers a new perspective on this issue. They looked at how women responded to men's emotional responsibility and willingness to help others. The study's findings could change our understanding of what makes men attractive to women. A study conducted by scientists from Monash University leads to new findings about men's attractiveness to women. In the experiment, women were shown photographs of men with brief stories about their behavior in various situations, including their reaction to an encounter with a homeless person. Some of the men ignored the homeless man, while others helped him, such as buying him food. A study found that men who showed empathy and kindness were more attractive to women compared to men who showed empathy and kindness. ... >>

Random news from the Archive

Scientists have explained the whiteness of the snow 01.01.2019

French meteorologists answered questions about why the snow is white and the frozen water is clear.

In this regard, the experts recalled that the transformation of water or water suspension into snowflakes of various shapes is far from a simple process. In most cases, it begins with the fact that water is attracted to the smallest solid particles, which can be a hundredth of a millimeter in diameter. That is, initially it occurs in conditions of far from ideal air purity.

It is around the microparticle that the initial hexagonal prism is formed - with six lateral rectangular faces. Crystals continue to grow, but their further shape depends on the conditions in which they find themselves - on atmospheric pressure, the electric field of the cloud, wind, humidity and temperature. Moreover, the ambient temperature is the most important - it decides whether the upper or lower prism, or their side faces, will develop and change.

So, temperatures of minus 5 - 10 degrees Celsius lead to the formation of snowflakes in the form of needles or tiny thin columns. At temperatures of 10 - 12 degrees, snowflakes form in the form of plates or flakes. And only at minus 12 - 18 degrees are the most beautiful - in the form of "stars" with six rays. At the same time, each snowflake has its own characteristics and is unique, as it is formed from water crystals of various shapes and numbers. During their formation, snowflakes increase in size from half a millimeter to several millimeters.

The white color of snow is caused precisely by its structure. In ice, all crystals are strictly aligned and oriented. Light, therefore, passes through ice with only a slight change in direction. Snow, on the other hand, has ice crystals arranged randomly. As a result, light falling on one of them, in a refracted form, falls on the other, which again changes its direction. Moreover, snowflakes are even capable of decomposing white light into color spectral components - but as a result, all this gives exactly white color.

Other interesting news:

▪ The transformation of a metal into a dielectric

▪ Developing 30Gbps Communications from Huawei

▪ iron therapy

▪ Chinese electric bus BYD - 325 km on a single charge

▪ 7,5" LCD

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the Garland website. Article selection

▪ article Being human means being a fighter. Popular expression

▪ article Which languages do not have related languages? Detailed answer

▪ article Working on a vertical hydraulic press for pressing paper waste. Standard instruction on labor protection

▪ article Connection of 2 computers on laser pointers. Encyclopedia of radio electronics and electrical engineering

▪ article Electronic temperature controller. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews