Instruction on labor protection for a product finisher

Free technical library

OCCUPATIONAL SAFETY AND HEALTH
Free library / Occupational Safety and Health / Standard instructions for labor protection

Instructions on labor protection for a product finisher. Full document

Occupational Safety and Health

Occupational Safety and Health / Standard instructions for labor protection

Comments on the article

Safe Operation

1. Labor protection requirements before starting work

1.1. Make sure that your work clothes are in good condition, put your hair under a headdress.

1.2. Check your workplace. Make sure that the removable parts of the mechanism (punches) are in good condition and securely fastened.

1.3. Make sure that the work area is adequately lit and not cluttered.

1.4. In case of any malfunction of the mechanisms, call a repairman, inform the head of the department.

1.5. It is forbidden: to involve unauthorized persons in the repair of equipment, to attempt to repair it yourself.

2. Labor protection requirements during work

2.1. Do not allow yourself to be distracted while you work.

2.2. Installation of buttons, caps, holnitens (metal fittings) includes the following steps:

cutting holes for metal fittings;
fixing metal fittings on a garment.

2.3. When cutting holes for metal fittings, you need to straighten the part of the garment (product) and lay it on the lower, fixing part of the mechanism (matrix).

2.4. Hold the part (product) with both hands on both sides of the die to avoid getting your fingers under the upper punch, which is attached to the mechanism rod.

2.5. To avoid injuring your fingers, gently press the foot pedal of the machine. At the moment of contact of the punch with the part (product), check the safe position of the hand and only after checking, apply additional pressure on the foot pedal to cut a hole in the product.

2.6. Check the quality of the fittings. The use of defective fittings causes injury. Hand over the defective fittings to the master for replacement.

2.7. To fix the fittings, the marked parts are straightened and placed along the marked holes, together with the prepared fittings, on the lower matrix of the mechanism.

2.8. After making sure that the fingers are in a safe position relative to the pressing parts of the mechanism, press the pedal with your foot with additional effort.

2.9. After pressing, wait until the return spring sets the rod with punches to its original (safe) position and only then remove the finished part (product) from the die.

2.10. Keep your work area clean and tidy. Don't block up the aisles.

3. Labor protection requirements at the end of work

3.1. Tidy up your workspace. Remove fixtures and fittings in the places provided for them.

3.2. Take personal hygiene measures.

For non-compliance with the instructions, the worker is subject to disciplinary liability in accordance with the internal labor regulations.

We recommend interesting articles Section Standard instructions for labor protection:

▪ Locksmith-repairman of the repair and procurement workshop. Standard instruction on labor protection

▪ Single bucket excavator operator. Standard instruction on labor protection

▪ Finisher of wood products, engaged in the application of paints and varnishes by dipping. Standard instruction on labor protection

See other articles Section Standard instructions for labor protection.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Artificial leather for touch emulation 15.04.2024

In a modern technology world where distance is becoming increasingly commonplace, maintaining connection and a sense of closeness is important. Recent developments in artificial skin by German scientists from Saarland University represent a new era in virtual interactions. German researchers from Saarland University have developed ultra-thin films that can transmit the sensation of touch over a distance. This cutting-edge technology provides new opportunities for virtual communication, especially for those who find themselves far from their loved ones. The ultra-thin films developed by the researchers, just 50 micrometers thick, can be integrated into textiles and worn like a second skin. These films act as sensors that recognize tactile signals from mom or dad, and as actuators that transmit these movements to the baby. Parents' touch to the fabric activates sensors that react to pressure and deform the ultra-thin film. This ... >>

Petgugu Global cat litter 15.04.2024

Taking care of pets can often be a challenge, especially when it comes to keeping your home clean. A new interesting solution from the Petgugu Global startup has been presented, which will make life easier for cat owners and help them keep their home perfectly clean and tidy. Startup Petgugu Global has unveiled a unique cat toilet that can automatically flush feces, keeping your home clean and fresh. This innovative device is equipped with various smart sensors that monitor your pet's toilet activity and activate to automatically clean after use. The device connects to the sewer system and ensures efficient waste removal without the need for intervention from the owner. Additionally, the toilet has a large flushable storage capacity, making it ideal for multi-cat households. The Petgugu cat litter bowl is designed for use with water-soluble litters and offers a range of additional ... >>

The attractiveness of caring men 14.04.2024

The stereotype that women prefer "bad boys" has long been widespread. However, recent research conducted by British scientists from Monash University offers a new perspective on this issue. They looked at how women responded to men's emotional responsibility and willingness to help others. The study's findings could change our understanding of what makes men attractive to women. A study conducted by scientists from Monash University leads to new findings about men's attractiveness to women. In the experiment, women were shown photographs of men with brief stories about their behavior in various situations, including their reaction to an encounter with a homeless person. Some of the men ignored the homeless man, while others helped him, such as buying him food. A study found that men who showed empathy and kindness were more attractive to women compared to men who showed empathy and kindness. ... >>

Random news from the Archive

Toshiba EBTZ1041-SK-A1 Wearable IoT Kit 13.03.2017

Toshiba has unveiled the EBTZ1041-SK-A1 Developer Starter Kit, which, according to the manufacturer, contains all the hardware and software needed to create wearable devices that process signals from multiple sensors. The task of the kit is to help in the creation of wearable electronics and the Internet of things devices on single-chip systems of the TZ1000 ApP Lite series.

The basis of the set is a board with an application processor TZ1041MBG, which the manufacturer calls the "sensor hub". Recall that the TZ1041MBG processor with Bluetooth v4.1 support joined the Toshiba ApP Lite series in September 2015.

The TZ1041MBG is configured with a 32-bit ARM Cortex-M4F processor, DSP and FPU, Bluetooth LE controller, I/O interfaces including I2C, UART, and SPI, and a 24-bit sigma-delta high speed ADC. resolution with a high-speed switch for connecting three input channels, 288 KB of SRAM and 1 MB of NOR flash.

In addition to TZ1041MBG, the EBTZ1041-SK-A1 board has a connector for connecting Arduino expansion boards (Arduino UNO R3) and a connector for connecting a Toshiba TC32306 single-chip transceiver, as well as a CMSIS-DAP debugger interface. You can use the nine-pin SWD connector to connect alternative debuggers.

Other interesting news:

▪ Internet for fishing

▪ Lack of sleep leads to overeating

▪ Clock with a dosimeter

▪ Ultrathin superwire

▪ SONY will build a super-TV on the CELL processor

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ radio section of the website. Article selection

▪ article If you want peace, prepare for war. Popular expression

▪ article What conditions will an astronaut find on Venus? Detailed answer

▪ article Loading and unloading of hopper cars. Standard instruction on labor protection

▪ article Infrared remote control for computer. Encyclopedia of radio electronics and electrical engineering

▪ article Power amplifier (tube). Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews