OCCUPATIONAL SAFETY AND HEALTH
Instructions on labor protection for the straightener of technological equipment (straightening straightener). Full document Occupational Safety and Health / Standard instructions for labor protection Safe Operation 1. General requirements for labor protection 1.1. Each worker, upon entering a job, must undergo an introductory safety briefing, and when transferring him from one job to another (at least for a short time), as well as from one workshop to another, he must undergo a safety briefing from the foreman at that workplace, which he will serve. 1.2. Persons at least 18 years of age who have passed a medical examination, have been trained in safe methods and methods of labor, have studied the instructions for labor protection and have been instructed at the workplace are allowed to work independently as a straightener of the technological equipment of the canvas. The straightener performs straightening and straightening of needle-platinum products after pouring them in the casting area, as well as straightening of needle eye combs removed from the machine and directly on the machine. 1.3. The adjuster of technological equipment is obliged to study and improve the methods of safe work. 1.4. Perform only assigned work. 1.5. Use only the correct tool. 1.6. For non-compliance with this instruction, the perpetrators are brought to administrative responsibility in accordance with the internal labor regulations of the enterprise. 2. Labor protection requirements before starting work 2.1. Make sure that overalls, safety shoes and protective equipment are in good condition. 2.2. Check your workplace and work area to make sure it is adequately lit and not cluttered. 2.3. Check the condition of tools and fixtures 3. Labor protection requirements during work 3.1. Wear protective goggles to protect against possible eye contact. 3.2. It is forbidden to break off the hooks of the needles with your hands, this should only be done with padelzang pliers. 3.3. Straightening of needle-platinum products is carried out on a non-working machine. 3.4. Make sure that needle-dressing products are only in the designated place (stow in special boxes). 3.5. Do not throw broken needles on the floor. 4. Labor protection requirements in emergency situations 4.1. In case of injury at work, immediately contact the first-aid post and inform the workshop administration about the incident. 4.2. Provide the necessary assistance to the victim at work and inform the administration of the shop about the accident. 5. Labor protection requirements at the end of work 5.1. Clean up your workplace, put the tools in the designated places. 5.2. Report any deficiencies to the shop manager. 5.3. Take personal hygiene measures. We recommend interesting articles Section Standard instructions for labor protection: ▪ Janitor working in a trade organization. Standard instruction on labor protection ▪ Piling and driving machine operator. Standard instruction on labor protection ▪ Refueler at a car filling station. Standard instruction on labor protection See other articles Section Standard instructions for labor protection. Read and write useful comments on this article. Latest news of science and technology, new electronics: Artificial leather for touch emulation
15.04.2024 Petgugu Global cat litter
15.04.2024 The attractiveness of caring men
14.04.2024
Other interesting news: ▪ Smartphone Gigabyte GSmart GX2 ▪ Shoes with GPS will tell you the route ▪ Learning outside of school is more useful ▪ The main scientific breakthrough of 2018 News feed of science and technology, new electronics
Interesting materials of the Free Technical Library: ▪ section of the site Electrician in the house. Article selection ▪ article Consumer society. Popular expression ▪ article Why did a French pilot drop a ball on the Germans instead of a bomb? Detailed answer ▪ article Field mint. Legends, cultivation, methods of application ▪ article Scheme of a COM mouse. Encyclopedia of radio electronics and electrical engineering ▪ article Simple thermostat. Encyclopedia of radio electronics and electrical engineering
Leave your comment on this article: All languages of this page Home page | Library | Articles | Website map | Site Reviews www.diagram.com.ua |