Job description for an electrician for the maintenance and repair of alarm, centralization and blocking devices

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for an electrician for the maintenance and repair of alarm, centralization and blocking devices. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The electrician reports directly to _______.
The electrician follows the instructions of _______.
The electrician replaces _______.
The electrician is replaced by _______.
Must know:

electrical and wiring diagrams of automatic blocking devices, electrical, dispatching, hump interlocking, automatic locomotive interlocking and backup devices;
methods and methods for identifying and eliminating failures of devices serviced; rules for excluding existing devices from centralization; checking dependencies;
the principle of operation of electronic devices and devices based on microprocessor technology.

Qualification requirements:

higher education (technical);
training.
work experience as an electrician in the maintenance and repair of alarm, centralization and blocking devices of the 7th category for at least 1 year.

II. Official duties

The electrician performs the following duties:

Maintenance of automatic blocking devices, electrical, control room, hump centralization; searches for damage and eliminates them; performs regulatory and installation work; replaces devices and equipment in existing signaling devices.
Maintenance of devices and replaces faulty blocks of electronic equipment and equipment on microprocessor technology in signaling devices and sorting yards.
Maintenance of wagon retarders, their assembly and adjustment at repair sites and on the road, replaces wagon retarders on a marshalling yard.
Maintenance, adjustment and replacement of pneumatic mail blower units with forwarding of shipping documents.
Serves track circuits that are equipped with automatic locomotive signaling devices and redundant autonomous automatic speed control devices.

III. Rights

The electrician has the right:

Get acquainted with the draft decisions of the management of the enterprise regarding its activities.
Participate in the discussion of issues related to the performance of his duties.
Make suggestions for improving the work related to the provisions of this instruction.
Within the limits of his competence, inform his immediate supervisor about all those identified in the course of his activities, and make proposals for their elimination.
Require the management of the enterprise to assist in the performance of their duties.

IV. A responsibility

The electrician is responsible

For improper performance or non-performance of their official duties, as well as for non-use or directly to their rights provided for by this Job Description - to the extent determined by the current legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor legislation on labor of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Director of editing television and radio programs. Job description

▪ Intern doctor. Job description

▪ Head of Operations. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Artificial intelligence will predict magnetic storms 21.05.2023

Scientists have developed an algorithm that can track and predict magnetic storms every minute. Thanks to artificial intelligence, experts will have about 30 minutes before a deadly magnetic storm will cover the Earth.

The NASA team is reportedly actively applying artificial intelligence models to solar storm data to develop an early warning system. In their opinion, AI can report the planet about 30 minutes before a potentially destructive magnetic storm will cover the Earth. This time is due to the fact that light travels faster than the material ejected from the Sun. In some cases, such as in Quebec about 35 years ago, solar storms can cut off electricity for several hours.

More extreme events, such as the Carrington solar storm more than 150 years ago, could lead to widespread destruction of electrical and communications infrastructure if they occur in modern times.

Researchers have long recognized this problem and have not sat idly by. They combined data from satellites and ground stations. The created algorithm was called DAGGER - it has quite impressive characteristics compared to analogues.

Most notable is the increase in forecasting speed. AI can predict the severity and direction of a solar storm in less than a second, and is capable of making a prediction every minute, scientists say.

The development of such AI is critical as the sun approaches the peak of its 11-year cycle in 2025.

According to preliminary calculations, two more magnetic storms are expected on Earth by the end of May. The first will be no higher than 4 points, but will last for three days - from May 23 to May 25. Then on May 25, a powerful one-day magnetic storm is expected, the strength of which will reach 5 points.

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ radio section of the website. Article selection

▪ article Removing excess paint from the roller. Tips for the home master

▪ article What are the benefits of snow? Detailed answer

▪ article Eugenol Basil. Legends, cultivation, methods of application

▪ article Dynamic filter - noise suppressor. Encyclopedia of radio electronics and electrical engineering

▪ article Frosty pattern on glass. Chemical Experience

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews