Job description for the foreman at the main production sites

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for the foreman at the main production sites. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The foreman at the main production sites belongs to the category of workers.
The foreman at the main production sites is appointed to the position and dismissed from it by the director of the enterprise on the proposal of _______ and reports directly to _______.
The foreman at the main production sites should know:

technological process of production and manufacture of products;
filling cards and technological instructions;
device, types of technological equipment and its purpose;
technological, organizational equipment and devices, their purpose and procedure for use;
requirements for raw materials, semi-finished products, materials;
types, properties and purpose of processed raw materials, semi-finished products and materials;
defects and flaws in products, their causes and measures to prevent and eliminate them;
consumption rates of basic and auxiliary materials;
operations performed by workers;
time standards used in the calculation of technically justified production standards;
rules and norms of labor protection, safety measures and industrial sanitation;
rules and methods of providing pre-hospital medical care;
rules of internal labor regulations;

During the absence of the foreman at the main production sites (illness, vacation, business trip, etc.), his duties are performed by a person appointed by order of the general director of the enterprise. This person acquires the appropriate rights and is responsible for the high-quality and timely performance of the duties assigned to him.

II. Official duties

Foreman at the main production sites:

Organizes work on the timely provision of workers with the necessary semi-finished products, materials.
Puts the workers in their places.
Controls the quality of products, compliance with the technological process, the contingency of operations, the correctness of keeping records of the production of workers.
Takes measures to eliminate downtime of equipment and workers.
If necessary, replace workers.
Eliminates the causes that cause a decrease in product quality.
Ensures the fulfillment of the main planned tasks of the brigade, conveyor, flow (site).
Supervises the timely and high-quality correction of product defects.
Instructs workers on safety precautions and the rules for the technical operation of equipment.
Conducts an inventory of work in progress at the beginning and end of the shift.

III. Rights

The foreman at the main production sites has the right to:

Get acquainted with the draft decisions of the management of the enterprise regarding its activities.
Participate in the discussion of issues related to their official duties.
Submit proposals for the improvement of the work related to the duties provided for in this instruction for consideration by your immediate supervisor.
Within the limits of his competence, inform his immediate supervisor of all shortcomings identified in the course of the performance of official duties and make proposals for their elimination.

IV. A responsibility

The foreman at the main production sites is responsible for:

For improper performance or non-performance of their official duties provided for by this Job Description - in accordance with the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - in accordance with the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - in accordance with the current legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Duty officer (for issuing certificates, hall, hotel floor). Job description

▪ Physiotherapy nurse. Job description

▪ Construction design engineer. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Fear of pain and brain activity 03.01.2019

The researchers applied a machine learning technique that could potentially convert activity patterns in fear-processing brain regions into scores to assess a patient's fear of pain. This neurobiological approach can help align emotions with their neural basis.

Fear associated with pain is usually assessed using various patient questionnaires. However, it is not clear to what extent these self-reports measure fear and anxiety, which are known to involve different areas of the brain and possibly different psychological constructs.

Michael Mayer and his colleagues in Petra Schweinhardts' lab at the Balgrist University Hospital in Zurich, Switzerland, decided to get around this uncertainty by scanning the brains of patients with low back pain as they watched video clips of harmful (bending) and harmless (walking) activities for the back. The intellectual activity of the participants determined their scores on various questionnaires. Importantly, different questionnaires were associated with different types of neural activity. These results suggest that similar questionnaires may measure different emotional states.

Other interesting news:

▪ In sneakers and barefoot

▪ Carbon ring

▪ Pedestrian crossing lights up

▪ Acoustic sensors on military helmets will detect snipers

▪ New neurons for your brain

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Grounding and grounding. Selection of articles

▪ article With fat to rage. Popular expression

▪ article What is industrial diamond? Detailed answer

▪ article Queensland walnut. Legends, cultivation, methods of application

▪ article Chinese lacquer. Simple recipes and tips

▪ Gerkona article. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews