Job description for a carver on saws, hacksaws and machines

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a carver on saws, hacksaws and machine tools. Full Document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The cutter on saws, hacksaws and machine tools is directly subordinate to _______.
The carver on saws, hacksaws and machine tools follows the instructions of _______.
The carver on saws, hacksaws and machine tools replaces _______.
The carver on saws, hacksaws and machine tools is replaced by _______.
The carver on saws, hacksaws and machine tools is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
Upon transfer to another job or dismissal from the position, the Cutter is responsible for the proper and timely delivery of cases to the person entering this position, and in the absence of such, to the person replacing him or directly to his supervisor.
Must know:

arrangement of cutting, turret-turning, horizontal milling and other machines of various types;
arrangement of universal and special devices and instrumentation;
geometry, rules for sharpening and installing saws made of tool steels with hard alloy knives in relation to the nature of processing and various grades of metal being processed;
cutting conditions of alloyed and high-alloyed steels.

II. Official duties

The carver on saws, hacksaws and machine tools performs the following job responsibilities:

Cutting off and cutting on cutting, turret-turning and horizontal milling machines, hacksaws and saws of various types of blanks of parts made of sectional metal of various profiles and sections with a thickness or diameter of more than 200 mm and from high-alloy, high-speed, corrosion-resistant, heat-resistant steels and austenitic steels, non-ferrous, refractory metals and alloys with a thickness or diameter of more than 100 mm from a material of various profiles, in a package or individually, as well as roll materials made of plastic.
Editing and cutting of metal on straight edged machines.
Setting up machines.
Marking according to the drawings of complex parts made of profile metal.

III. Rights

The cutter has the right:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The cutter is responsible for:

improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine;
violation of the rules and regulations governing the activities of the enterprise;
offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine;
infliction of material damage - within the limits determined by the current labor and civil legislation of Ukraine;
compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information;
compliance with internal regulations, safety and fire safety rules.

We recommend interesting articles Section Job descriptions:

▪ Engineer (system administrator) of the school. Job description

▪ Teacher-organizer. Job description

▪ Construction carpenter. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

New generation of OctaBus memory interface 08.11.2016

Macronix has introduced a new generation of OctaBus memory interface. According to the manufacturer, the development is well suited for IoT and automotive electronics. A small number of pins - 12 - allows you to simplify the device diagram and the topology of the printed circuit board, and reduce their cost. At the same time, high performance is maintained.

Macronix OctaBus memory subsystem will be offered in three main product lines
The original version of OctaFlash, introduced in 2015, provided a data transfer rate of 400 MB/s using eight lanes. The new option is suitable not only for Serial NOR flash memory (OctaFlash), but also for RAM (OctaRAM). The use of a bus with common I/O lines simplifies the design and unifies printed circuit boards. OctaRAM is said to provide performance comparable to DDR2.

One of the strengths of the OctaBus implementation is the simplification of MCP products that combine different types of memory chips. The use of separate buses makes it necessary to increase the number of pins in the BGA package, which requires an increase in the package itself. According to the manufacturer, the transition to OctaBus has reduced the size of a typical case from 9 x 9 mm to 6 x 8 mm.

The Macronix OctaBus memory subsystem will be offered in three main product lines. These are OctaFlash flash memory chips with a density from 256 Mb to 2 Gb, OctaRAM memory chips with a density from 32 Mb to 128 Gb, and OctaMCP modules, including 512 Mb of OctaFlash memory and 64 Mb of OctaRAM memory.

Other interesting news:

▪ Smart contact lens for diabetics

▪ Tea bags are dangerous to humans

▪ Factory for the production of artificial meat

▪ DNA and premature aging

▪ Sports and fasting

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Indicators, sensors, detectors. Article selection

▪ article White flies. Popular expression

▪ article Which country bans too thin top models from working? Detailed answer

▪ rosemary article. Legends, cultivation, methods of application

▪ article Synthesis of tris (2,2'-bipyridine) ruthenium(II) tetrafluoroborate. Encyclopedia of radio electronics and electrical engineering

▪ article Fast mains voltage comparator on a CMOS chip. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews