Job description for a roofer on steel roofs

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a roofer on steel roofs. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The steel roofer reports directly to _______.
The steel roofer follows the directions of _______.
The steel roofer replaces _______.
The roofer on steel roofs is replaced by _______.
A steel roofer is appointed and dismissed by the head of the department in agreement with the head of the department.
Must know:

methods of repair and installation of roofs from sheet roofing steel;
rules and norms of labor protection;
internal labor regulations.

When transferring to another job or dismissal from office, the Roofer is responsible for the proper and timely delivery of cases to the person entering this position, and in the absence of such, to the person replacing him or directly to his supervisor.

II. Official duties

The Steel Roofer is responsible for the following duties:

performing complex work during the repair and installation of roofs made of roofing steel;
performing related work.

III. Rights

The roofer has the right:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties.
control the fulfillment of production tasks, the timely execution of individual orders by subordinate employees.
request and receive the necessary materials and documents related to the issues of its activities and the activities of employees subordinate to it.
interact with other services of the enterprise on production and other issues that are part of its functional duties.
get acquainted with the draft decisions of the management of the enterprise regarding the activities of the Division.
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description.
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline.
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The roofer is responsible for:

for improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine;
for violation of the rules and regulations governing the activities of the enterprise;
for offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine;
for causing material damage - within the limits determined by the current labor and civil legislation of Ukraine;
for compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information;
for compliance with internal regulations, safety and fire safety rules.

We recommend interesting articles Section Job descriptions:

▪ Broadcast video engineer. Job description

▪ Deputy chief physician of the hospital for surgery. Job description

▪ Handyman. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Diamond tool in the stone age 08.05.2005

American physicist Peter Liu, studying the composition of four stone axes found in ancient Chinese burials near Shanghai, found that they are composed mainly of corundum. This is the second hardest (after diamond) natural mineral, meanwhile, the axes, whose age archaeologists estimate at 4500-6000 years, are polished to a mirror shine.

Until now, it was believed that the ancient inhabitants of China used quartz sand for grinding, but quartz is too soft compared to corundum. Taking the same rock, Liu tried to grind it on a modern grinding machine using three common abrasive powders - quartz, corundum and diamond.

It was possible to obtain a surface of such purity as on Stone Age axes only with the help of diamond powder. By the way, two diamond placers are known about 300 kilometers from the place of discovery.

Other interesting news:

▪ Magnetic nanomaterial to protect securities from counterfeiting

▪ Terra 360 Ultra-Speed Charging for Electric Vehicles

▪ False nails glow with mobile phone call

▪ spider robot

▪ The most powerful wind turbine MingYang Smart Energy

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Personal transport: land, water, air. Article selection

▪ article Here is evil-mindedness worthy fruits. Popular expression

▪ What were the results of the struggle for independence of the British colonies? Detailed answer

▪ article Sandblasting. Standard instruction on labor protection

▪ article Low battery indicator. Encyclopedia of radio electronics and electrical engineering

▪ article Stabilized power supply, 220/1-40 volts. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews