Job description for an insulator on waterproofing

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for an insulator on waterproofing. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The waterproofing insulator reports directly to _______.
The insulator on the waterproofing follows the instructions of _______.
Insulator on waterproofing replaces _______.
The insulator on the waterproofing is replaced by _______.
Must know:

methods for performing waterproofing of a surface with a particularly complex configuration;
technical conditions for the production and acceptance of waterproofing works;
methods for arranging multilayer seals in waterproofing dowels;
ways to perform particularly complex work on waterproofing hydraulic structures.

Qualification requirements:

complete or basic general secondary education;
vocational education;
training;
work experience of insulators on waterproofing of the 5th category for at least 1 year.

II. Official duties

The insulator on waterproofing performs particularly complex work on waterproofing structures and structures:

installation of a waterproofing coating at the junction of waterproofing with embedded parts and expansion joints;
installation of asphalt dowels for expansion joints of concrete massifs of hydraulic structures built on foundations that are compressed;
the device of sockets from rolled waterproofing materials for passing through the insulating coating of anchors and pipelines;
installation of stainless steel metal diaphragms in waterproofing dowels and expansion joints;
arrangement of multilayer seals in dowels.

III. Rights

The waterproofing insulator has the right to:

Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
Participate in the discussion of issues related to the performance of his duties.
Make suggestions for improving the work related to the provisions of this instruction.
Within its competence, report to the management about all identified in the course of its activities, and make proposals for their elimination.
Require management to assist in the performance of their duties.

IV. A responsibility

The insulator on waterproofing is responsible

For improper performance or non-performance of their official duties, as well as for non-use or directly to their rights provided for by this Job Description - to the extent determined by the current legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor legislation on labor of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Deputy director for sports. Job description

▪ Office Manager. Job description

▪ Machinist (fireman) of the boiler room. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Fullerene will not conduct current 25.12.2009

The electric current between two fullerenes in contact goes badly, German physicists have established.

In the future, microcircuits are going to be made from individual molecules, most likely from carbon nanotubes. And they will be placed very tightly on the substrate, because the task is to create subminiature devices.

How tightly can you pack them without fear of electric current flowing in the wrong directions? The answer to this question was found by physicists from the University of Kiel, headed by Professor Richard Berndt.

They carried out the following subtle experiment. Using the probe of a tunneling microscope, they picked up one fullerene ball and delivered it to a predetermined place. Then they picked up the second same molecule and moved it close to the first one. The accuracy of movement in this case amounted to several trillionths of a meter.

By passing an electric current through the resulting pair, the researchers found that the conductivity is low: a hundred times less than that of the fullerene molecule itself. This means that when creating nanocircuits, special insulation of nanotube wires is not required.

Other interesting news:

▪ Standardized HDMI Alternate Mode for USB-C connection

▪ 4 billion GSMA subscribers

▪ The most powerful system on a chip

▪ FedEx Postman Robot

▪ Soda damages the kidneys

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Welding equipment. Article selection

▪ article by Giovanni Boccaccio. Famous aphorisms

▪ article What is a boycott? Detailed answer

▪ article Recovery of ferric chloride. HAM Tips

▪ article Command apparatus for receiver and transmitter Signal-1. Encyclopedia of radio electronics and electrical engineering

▪ article A card from the deck turns into one of two cards. Focus secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews