Job description for the operator of copiers and duplicators

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for the operator of copying and duplicating machines. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The operator of copying and duplicating machines is appointed to the position and dismissed from the position in the manner established by the current labor legislation by order of the director of the enterprise.
The copying and duplicating machine operator reports directly to _______.
During the period of temporary absence of the Operator of copying and duplicating machines, his duties are assigned to _______.
Qualification requirements:

2nd category - Basic or incomplete basic general secondary education. Obtaining a profession directly in production. No work experience requirements.
3rd category - Complete or basic general secondary education. Vocational education without work experience requirements or obtaining a profession directly in production, advanced training and work experience in a 2nd category profession - at least 1 year.

The operator of copiers and duplicating machines must know:

types of copying and duplicating electrographic machines, operating principles and rules of their operation;
rules for establishing copy mode;
device and rules for the operation of collating and wire sewing machines;
documentation rules.

II. Official duties

Copies the original onto paper or a plate using copiers and duplicating electrographic machines and machines of various systems and designs.
Strengthens the copying mode, enlarges copies, multiplies them from plates or films, checks the quality of copying.
Disassembles and compares printed letters with the original, sews the set on a wire sewing machine.
Prepares equipment and materials for work, adjusts equipment during operation and cleans it.
Maintains established documentation.

III. Rights

The operator of copying and multiplying machines has the right:

Report to management any identified deficiencies within your competence.
Make proposals for improving the work related to the duties provided for in this Job Description.

IV. A responsibility

The operator of copiers and duplicators is responsible for:

The quality and timeliness of the fulfillment of the duties assigned to him by this Job Description.
Compliance with the internal labor regulations of the enterprise.
Compliance with instructions on labor protection, fire safety and industrial sanitation.

We recommend interesting articles Section Job descriptions:

▪ Web designer of the Internet marketing department. Job description

▪ Marketing Project Manager. Job description

▪ Fritter. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Ford smart suspension with pothole protection 01.07.2018

Bad roads are one of the main causes of accidents worldwide. In addition, potholes often lead to serious damage to the chassis and wheels of vehicles. Ford sees a partial solution to the problem in the introduction of "smart" suspension, which recognizes bumps on the road and reduces the negative consequences of hitting them.

The pothole protection system is based on an active suspension with continuously variable damping force (Continuously Controlled Damping). The electronic unit, coupled with a special software module, continuously analyzes data from 12 sensors. Sensors are polled every 2 milliseconds, which allows you to instantly respond to changing traffic conditions.

The system recognizes the moment when the wheel begins to fall into the pit, and the adaptive suspension instantly adjusts the stiffness of the shock absorbers in such a way that the wheel, when it hits the pothole, practically does not touch the bottom of the depression and, thus, “jumps over” it. In other words, the wheel remains in a “compressed” state, due to which, when exiting a pothole, it does not beat so much against its edge, which makes the passage of bumps more comfortable for passengers and reduces the load on the suspension.

When driving through a pit with the front wheels, the rear wheels are prepared for unevenness in advance, which additionally protects them from impact.

The system is already available on select Ford models, including the Mondeo business sedans, Galaxy minivans and S-MAX minivans in Europe. In addition, the company is starting to offer this solution for the C segment for the first time: active suspension with pothole protection is available for the new version of the Focus.

Other interesting news:

▪ Floating City Freedom Ship

▪ Fullerenes can be dangerous

▪ Panasonic Virtual Yoga Coach

▪ Glass in cosmetics

▪ Infineon IRS200S Half-Bridge 2007V MOSFET Driver

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Normative documentation on labor protection. Article selection

▪ article Fire on headquarters! Popular expression

▪ article Which scientist and for what purpose cut off the skin from his fingers? Detailed answer

▪ article Doctor-infectionist. Job description

▪ article Antenna with omega matching. Encyclopedia of radio electronics and electrical engineering

▪ article Forcing Double turnover. Focus Secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews