Job description for a colorist

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a colorist. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The colorist belongs to the category of specialists, is hired and dismissed by order of the general director of the enterprise on the proposal of the deputy general director for production or the foreman.
A person who has primary vocational or secondary vocational education and work experience as a colorist for at least 3 years is appointed to the position of colorist. In the absence of special education, at least 5 years of work experience in the field of enamel selection and advanced training in the specialty are required.
The colorist reports to the general director, deputy general director for production and directly reports to the foreman.
In his work, the colorist is guided by:

legislative and regulatory documents regulating the production and economic activities of the shop;
methodological materials relating to relevant issues;
the charter of the enterprise;
labor regulations;
orders and directives of the general director, deputy general director for production and shop foreman (direct supervisor);
this Job Description.

The colorist must know:

various techniques for applying finishing coatings for applying Sikkens enamels, depending on the type of repair;
technology of full painting of a car, repair of parts and repair of stained enamels;
transition repair;
characteristics of toners;
priming, grinding, polishing technique;
defect prevention techniques;
various types of painting equipment available on the market;
various types of finishing coatings in combination with various hardeners and solvents;
inner order rules;
rules and regulations of labor protection and safety.

During the absence of a colorist, his duties are performed by a deputy or another person appointed in the prescribed manner, who is fully responsible for their timely and high-quality implementation.

II. Official duties

Apply products in accordance with the technical instructions (TIS).
Choose the most suitable paint equipment and use it correctly in order to obtain optimal results.
Identify repair paint defects and determine their causes in order to prevent these defects in the future.
Analyze the repair process and ensure its most efficient organization.
Work with applied paints and varnishes in the most efficient way.
Choose the optimal coating system, using the test-spray method for each specific repair.
Be able to analyze and mix colors in the shortest possible time in close contact with the painter and foreman.
Achieve a color match between the original color of the car body and the color of the manufactured enamel, with the least amount of time and materials.
Do the job correctly and efficiently, without alterations.
Identify errors that occur in the production process and determine ways to prevent them.
Control the availability and use of paints and varnishes and inform the immediate supervisors about the timely replenishment, prepare documents for their write-off.
Observe the rules and regulations of labor protection, safety precautions when working with materials.

III. Rights

The colorist has the right:

Gets acquainted with the draft decisions of the management of the enterprise regarding its activities.
Submit proposals for improvement of the work related to the responsibilities provided for in this instruction for consideration by the management.
Receive from direct supervisors information and documents on issues within his competence.
Require the management of the enterprise to assist in the performance of their duties and rights.

IV. A responsibility

The colorist is responsible for:

For failure to perform (improper performance) of their official duties provided for by this Job Description, within the limits determined by the labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the labor, criminal and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Demonstrator of plastic poses. Job description

▪ General director (chairman, president, other head) of an association of trade enterprises (associations, corporations, concerns). Job description

▪ Assembler of products and structures. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Direction finder Saab Sensor Compact 16.05.2022

Saab has developed a mobile electronics module, the Sensor Compact, which is able to monitor airborne threats and still go unnoticed.

Sirius Compact is a device belonging to the class of technology for electronic warfare (EW). It allows you to create an entire passive network to monitor threats, increase situational awareness and support operations at all tactical levels.

The sensors detect electromagnetic emissions from enemy vehicles, evaluate their power and classify data transmission channels, while remaining invisible to enemy direction finders due to the absence of outgoing signals.

Specifications Sensor Compact:

Height: 30 cm
Diameter: 14 cm
Weight: about 3 kg
Power: 50 W
Frequency Range: 2-11;18GHz
Interfaces: Ethernet, 18-28 V DC
Azimuth coverage: 360°
DF accuracy: < 2° RMS
Geolocation using triangulation
Digital channel receiver
Positioning: built-in IMU/GNSS

Small size and autonomy allow you to quickly install the Sensor Compact on a tripod right on the battlefield, they can also be placed on drones, cars, ships and other vehicles. By moving the sensors or combining the data of several of them, you can establish the exact position of objects using triangulation. The system will warn in advance of approaching targets, which is especially important in the work of ground-based air defense.

Sensor Compact do not store confidential data, which eliminates information leakage if the device is lost.

"Operating in the electromagnetic spectrum of today's battlefield is an ever-changing challenge. The need to remain undetected in the deployment and use of electronic warfare was at the forefront of the development of the Sirius Compact," commented Karl-Johan Bergholm, head of Saab's surveillance division.

Other interesting news:

▪ Wounds heal faster

▪ In the United States will distribute land for the installation of solar panels

▪ Smart contact lenses

▪ Tetraneutron discovered

▪ Mobile phone that works without cellular operators

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Big encyclopedia for children and adults. Selection of articles

▪ article How to drink to give. Popular expression

▪ article What is a Gordian knot? Detailed answer

▪ article Surepka early. Legends, cultivation, methods of application

▪ article Soldering aluminum at home. Encyclopedia of radio electronics and electrical engineering

▪ article Soap bubbles on a stand. physical experiment

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews