Job description for a demonstrator of plastic poses

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a demonstrator of plastic poses. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The demonstrator of plastic poses is directly subordinated to _______.
The demonstrator of plastic poses follows the instructions of _______.
The demonstrator of plastic poses replaces _______.
The demonstrator of plastic poses is replaced by _______.
The demonstrator of plastic poses is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
Must know:

basic principles of plastic and facial expression of the human body and face;
rules and conditions for demonstrating plastic poses in clothes and in the nude;
safety rules when demonstrating plastic poses and movements in various conditions;
techniques for revealing the image of a pose, depending on its nature;
training methods;
dressing rules.

II. Official duties

Demonstration of plastic poses for a set time in various positions, in motion, in different types of clothing and in the nude in creative and educational workshops, classes, ateliers, studios and in the open air to create works of painting, sculpture, graphics and other types of fine art.
Improving body and facial movements through individual training to develop endurance to maintain postures in various positions for a set time.
Reproduction of feelings, moods of a person in facial expression and posture.
Creating a live image in a static position.
Production fitting of clothes during its manufacture.
Preparing for work and cleaning the workplace.

III. Rights

The demonstrator of plastic poses has the right to:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties.
control the fulfillment of production tasks, the timely execution of individual orders by subordinate employees.
request and receive the necessary materials and documents related to the issues of its activities and the activities of employees subordinate to it.
interact with other services of the enterprise on production and other issues that are part of its functional duties.
get acquainted with the draft decisions of the management of the enterprise regarding the activities of the Division.
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description.
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline.
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The plastic pose demonstrator is responsible for:

improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine.
violation of the rules and regulations governing the activities of the enterprise.
When transferring to another job or being released from a position, the Demonstrator of plastic poses is responsible for the proper and timely delivery of work to the person taking up the current position, and in the absence of one, to the person replacing him or directly to his supervisor.
offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.
compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information.
compliance with internal regulations, safety and fire safety rules.

We recommend interesting articles Section Job descriptions:

▪ Computer graphics designer for the video production department. Job description

▪ Head of Financial Department. Job description

▪ Tiler-tiler. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

CC1310F128 transceiver with 16 uA consumption 19.04.2016

When designing devices for the Internet of Things, consumption in the receive mode is the main factor affecting battery life. The CC1310F128 transceiver is the best in its class and requires only 5,5 mA when operating in continuous receive mode. However, this current does not allow operation on AA batteries for more than one to two weeks.

To reduce the current consumption in the CC1310 radio core, a special command CMD_PROP_RX_SNIFF ("sniff") is provided, which puts the receiver into a special mode (Wake-on-Radio) with periodic activation of the receiving part, which can significantly reduce the average current consumption - up to 16 μA and below.

The principle of operation of the Wake-on-Radio mode (wake-on-radio) is quite simple - the receiver is not turned on all the time, but periodically starts for a short time to check the presence of the expected signal. If a signal is detected, the packet is received; if not, the receiving part is turned off to save energy. Signal availability is assessed by two adjustable parameters - carrier level (RSSI) and preamble quality (PQT). Of course, this mode also has a negative side - the transmitted packet must have a long preamble so that the receiver does not miss useful data during sleep.

Separate examples for the receiver (rfWakeOnRadioRx) and the transmitter (rfWakeOnRadioTx) make it possible to implement a radio channel with a message transmission latency of 500 ms. This delay allows you to reduce the current consumption of the receiver to 16 μA (more than 10 years of operation).

At shorter delays, the average current consumption increases, at longer delays, the current consumption can be even lower. If the delay time is reduced to 100 ms, which can be considered an acceptable value for visual control, the current consumption of the receiver will not exceed 100 μA. This current consumption allows you to work more than two years on AA batteries (2000 mAh).

Other interesting news:

▪ Sony Inzone Surround Sound Gaming Headsets

▪ Extremely intermittent radio pulsar discovered

▪ Birth control pills affect fear

▪ Canon M-i1 Android Projector

▪ Large underwater bike park built in Amsterdam

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section And then an inventor (TRIZ) appeared. Article selection

▪ article Stanislavsky Konstantin Sergeevich. Famous aphorisms

▪ How many wives did Henry VIII have? Detailed answer

▪ Rose article. Legends, cultivation, methods of application

▪ article A simple frequency synthesizer. Encyclopedia of radio electronics and electrical engineering

▪ article Miracle album. Focus Secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews