Job description for a tiler

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a tiler. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The tiler-tiler is directly subordinated to _______.
The tiler follows the instructions of _______.
The tiler replaces _______.
The tiler is replaced by _______.
The tiler-tiler is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
Must know:

methods of marking and breakdown for tiling curved surfaces and for decorative cladding;
decorative cladding methods.

Upon transfer to another job or dismissal from office, the Tiler is responsible for the proper and timely delivery of cases to the person entering this position, and in the absence of such, to the person replacing him or directly to his supervisor.

II. Official duties

performance of complex works on facing with ceramic, glass, asbestos-cement and other tiles;
performing related work.

III. Rights

The tiler has the right to:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The tiler is responsible for:

for improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine.
for violation of the rules and regulations governing the activities of the enterprise.
for offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
for causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.
for compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information.
for compliance with internal regulations, safety and fire safety rules.

We recommend interesting articles Section Job descriptions:

▪ Accountant-cashier. Job description

▪ Vice-rector for academic work of a higher educational institution. Job description

▪ Consultant on taxes and fees. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

New tablets 21.02.2011

In 2010, the tablet market has experienced major changes due to the release of the iPad, and, quite naturally, its major players are preparing to win back the leadership in this segment from Apple. They all go to the "war" as one, armed with the Google Android operating system, and only in rare cases can you find models on Windows 7.

The hardware characteristics of such devices are as follows: touch displays with a diagonal of 5,7 or 10 inches, NVIDIA Tegra 2 chips, Qualcomm Snapdragon, and Intel Atom. Ha CES 2011 Google announced the imminent release of Android 3.0, which was developed specifically for tablets, but in action it never showed.

Most manufacturers have not yet seen this platform and will release devices under Android 2.3 for now. Despite expectations, Microsoft did not introduce a tablet operating system at CES, continuing to recommend Windows 7 for this purpose.

According to Steve Balmer (Steve Balmer), the next version of Windows will support the ARM architecture, and this implies its installation on tablets based on Tegra 2 or Snapdragon.

Other interesting news:

▪ Packaging for living cells

▪ Goodyear on lunar soil

▪ DC-DC Converter EL7566

▪ Dolphin paradox resolved

▪ Electromagnetic generator operating without fuel

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Low frequency amplifiers. Article selection

▪ article International economic relations. Crib

▪ article What are the rules for chess and boxing competitions? Detailed answer

▪ article The operator of the braiding machine (weaver). Standard instruction on labor protection

▪ article The first domestic computers. Encyclopedia of radio electronics and electrical engineering

▪ article Electrothermal installations. Installations of arc furnaces of direct, indirect action and resistance arc furnaces. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews