Job description for coastal boatswain

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for coastal boatswain. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The coastal boatswain belongs to the category of technical performers and reports directly to _______.
A person with primary vocational education and special training according to an established program is appointed to the position of coastal boatswain without presenting requirements for work experience.
Appointment to the position of coastal boatswain and dismissal from it are made by order of the head of the enterprise.
The coastal boatswain must know:

rules and procedure for the performance of work on the mooring of ships;
rules for the use of rigging, inventory and tools when mooring ships;
commands and alarms given from ship and shore;
rules for the use of lifting mechanisms;
methods of performing carpentry, plumbing and painting work;
rules for using rowing and motor boat (boat);
maximum permissible carrying capacity and passenger capacity of serviced watercraft;
rules and norms of labor protection, safety precautions, industrial sanitation and fire protection;
techniques and methods of providing first medical aid.

During the absence of the coastal boatswain (illness, vacation, etc.), his duties are performed by a person appointed in the prescribed manner.

II. Official duties

The coastal boatswain performs the following duties:

Systematic inspection and preparation of berths for mooring ships.
Ensuring the safety of parking at the pier for small boats.
Ensuring the constant readiness of fire-fighting equipment, fire passages to the berths, and, in winter, fire trucks.
Ensuring safety precautions when mooring ships and the safety of people when transporting small craft.
Reception, storage, issuance and accounting of skipper's property and other materials, preparation of applications and requirements for their receipt.
Carrying out current repairs, repair of small watercraft.
Management of loading and unloading operations.
Guiding coastal sailors and workers when performing mooring work and repairing skipper's property.

III. Rights

The coastal boatswain has the right:

Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
Submit proposals for improvement of the forms and methods of work performed by the enterprise management for consideration.
Communicate with all structural divisions of the enterprise.
Require the management of the enterprise to assist in the performance of their duties.

IV. A responsibility

The coastal boatswain is responsible for:

For improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Tourism product manager. Job description

▪ Endocrinologist. Job description

▪ Hair, wool and bristle processor. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

New underwater acoustic invisibility cloak 19.05.2018

A team of researchers from the University of Pennsylvania has developed a concealment device that works effectively underwater. This new "metamaterial invisibility cloak" is able to intercept and refract acoustic waves propagating under water, which probe the surrounding space with sonars. At the same time, all this happens without the slightest reflection or scattering of sound waves, due to which the sonar will not be able to know that any object is within its reach.

We remind our readers that metamaterials are artificial materials with a complex structure and structure of their surface, due to which they have properties that are completely absent from any materials of natural origin. Typically, metamaterials are composite materials based on various metals, ceramics, and plastics.

In the case of an underwater acoustic invisibility cloak, the problem of creating an effective concealment device is complicated by the fact that water is denser and less compressible than air, which limits the number of possible options. The material of the new invisibility cloak consists of cells whose dimensions are smaller than the wavelength of acoustic vibrations. After testing various options, the researchers settled on a device in the form of a pyramid, 90 centimeters high, made of metal plates perforated in a special way.

The tests of the device were carried out in a tank filled with water, equipped with a source of sound waves with a frequency of 7 to 12 thousand Hertz and a variety of hydrophones that controlled the entire picture of sound vibrations in the tank. It was found that the pyramid still reflected sound waves back, however, the phase, amplitude and some other parameters of the sound waves did not correspond to the parameters of the waves reflected from the surface of an object. And this, in turn, makes it impossible for the normal operation of instruments such as sonar.

According to the researchers, the technology they have developed, in addition to its use as sonar hiding devices, has a number of possible applications. And such areas, first of all, include long-range underwater communications, the operation of which is based on acoustic range signals.

Other interesting news:

▪ Digitized borders

▪ Innovative 4D NAND Flash

▪ Breakthrough in cryomicroscopy

▪ Iron irons vertically

▪ ROG Strix GeForce GTX 1080 Ti and Turbo GeForce GTX 1080 Ti graphics cards from Asus

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Calls and audio simulators. Article selection

▪ article It's too early for us to die - we still have things to do at home. Popular expression

▪ article Which country produces the most movies? Detailed answer

▪ article Dismissal for violation in the field of labor protection

▪ Article Liquid Bronze. Simple recipes and tips

▪ article The ancestor of the camera. physical experiment

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews