Free technical library
Stability of the functioning of economic objects and technical systems in emergency situations. Basics of safe life
Directory / Basics of safe life
Comments on the article
Ensuring the stable operation of economic facilities in an emergency situation in peacetime and wartime is one of the main tasks Russian system of warning and action in emergency situations.
Under sustainability of the functioning of the object of the economy or other structures understand their ability in emergency situations to withstand the effects of damaging factors in order to maintain product output in the planned volume and range; preventing or limiting the threat to the life and health of personnel, the population and material damage, as well as ensuring the restoration of disrupted production in the shortest possible time.
The following factors influence the stability of the operation of facilities in an emergency:
1) reliability of personnel protection;
2) the ability to withstand the damaging factors of fixed production assets;
3) technological equipment, energy supply systems, logistics and sales;
4) readiness to conduct rescue and other urgent work and work to restore production, as well as reliability and continuity of management.
The listed factors determine the basic requirements for the sustainable functioning of economic facilities, set out in the Design Standards for engineering and technical measures.
The assessment of resistance to the impact of damaging factors of various emergency situations consists in:
1) identifying the most likely emergency situations in the area;
2) analysis and assessment of damaging factors of emergency situations;
3) determining the characteristics of the object of the economy and its elements;
4) determining the maximum values of damaging parameters;
5) determination of the main measures to improve the stability of the operation of economic objects (appropriate increase in the stability limit).
The main criterion for sustainability is the limit of stability of the object of the economy to the parameters of the damaging factors of the emergency:
1) mechanical damaging parameters;
2) thermal (light) radiation;
3) chemical contamination (lesion);
4) radioactive contamination (irradiation). The definition of the most probable emergency situations is based on the type of economic object, the nature of the technological process and the characteristics of the geographical area. The maximum parameters of the damaging factors are determined by calculation or are set by the headquarters of the Civil Defense Emergencies.
We recommend interesting articles Section Basics of safe life:
▪ Atmospheric emissions of a millionaire city
▪ Civilian civil defense organizations
▪ Principles of organization and tasks of the disaster medicine service
See other articles Section Basics of safe life.
Read and write useful comments on this article.
<< Back
Latest news of science and technology, new electronics:
Machine for thinning flowers in gardens
02.05.2024
In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers.
... >>
Advanced Infrared Microscope
02.05.2024
Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>
Air trap for insects
01.05.2024
Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>
Random news from the Archive Recycling plastic into fuel
22.01.2019
Scientists from Purdue University (West Lafayette, USA) have developed a new method for converting plastic, which involves obtaining clean fuels, polymers and monomers.
The developers called the new method hydrothermal liquefaction. It lies in the fact that polymers melted at high temperature are combined with supercritical water (a transition state between liquid and gaseous forms of water).
As a result, the process of formation of a substance called naphtha occurs. Oil has combustible properties and can be converted into fuel or separated into other components. Such developments of scientists were prompted by the fact that every year the amount of plastic in the oceans is increasing.
According to experts, the amount of plastic waste that enters the world's waters reaches from 8 to 12 million tons annually. This negatively affects representatives of the oceanic and marine fauna. Even whole "garbage islands" are formed. Also, the new method can save the planet from fuel shortages and improve the global environmental situation.
|
Other interesting news:
▪ Fully autonomous shuttle
▪ Mother's sleepless nights
▪ Imaginary multitasking improves brain function
▪ Speech slows down due to nouns
▪ Phison PS5.0-E5026 PCIe 26 Drive
News feed of science and technology, new electronics
Interesting materials of the Free Technical Library:
▪ section of the site Calls and audio simulators. Article selection
▪ article In the main - unity, in the secondary - freedom, in everything - love. Popular expression
▪ article What unconsciously provokes people to violate the established rules of behavior? Detailed answer
▪ Article Change of drainpipes. Standard instruction on labor protection
▪ article Amplifier on 6H13S lamps. Encyclopedia of radio electronics and electrical engineering
▪ article Adjustable power supply with automatic voltage switching at the input of the stabilizer. Encyclopedia of radio electronics and electrical engineering
Leave your comment on this article:
All languages of this page
Home page | Library | Articles | Website map | Site Reviews
www.diagram.com.ua
2000-2024