Fake shuffle. The arrangement of the cards after the shuffle does not change in four ways). Spectacular tricks for a fun company

EFFECTIVE FOCUSES AND THEIR CLUES
Free library / Directory / Spectacular tricks and their clues

Fake shuffle. The arrangement of the cards after the shuffle does not change in four ways). Focus Secret

Spectacular tricks and their clues

Directory / Spectacular tricks and their clues

Consider the options for false shuffles, when when the location of the cards after the shuffle does not change.

The first method

We take the deck in the left hand. With your thumb, lower the top few cards into your right hand. The rest of the cards we shift the floor several pieces "simultaneously" alternately on both sides of these first cards, as in a normal shuffle. "At the same time" means that we actually place the pile above the cards of the right hand, but do not leave it here, but press it with the thumb against the top side of the cards and, with the next movement, place it under the cards in the right hand.

Thus, the cards from the left hand are not located between the cards of the right hand, but are all under them, without changing their order.

If you are used to shuffling cards not from the left hand to the right, but vice versa, then you can perform the described actions in this direction.

second method

We take the upper half of the deck in the right hand, and the lower half in the left. In this case, the thumbs hold the cards from above, and the remaining fingers - from below.

We bring the hands with the cards closer to each other and put a little edge of the cards from the left hand between the edges of the cards from the right hand. To do this, we open the cards a little. The right cards should protrude slightly from the edges of the left cards.

Focus False shuffle. The location of the cards after the shuffle does not change four ways)

If you fold the deck now, it will indeed be shuffled. To avoid this, we grab the cards from this side with the thumb and second finger of the right hand and quickly move them up and down. These cards are released from the second part of the deck, now it remains to lower them to its top and connect the entire deck.

A third method

First, we make a volt to shift the bottom of the deck up. We take the deck in the right hand, but separate the parts of the deck with the little finger of the right hand. We hold the cards face down above the table and drop on the table several times those that now make up the bottom of the deck.

The cards must then be placed on the table in four small piles, falling in order: 2 1 4 3.

Focus False shuffle. The location of the cards after the shuffle does not change four ways)

The cards in the first three piles are from the bottom half of the deck, and the cards in the fourth pile are the entire top half of the deck.

With your left hand, quickly put pile 1 on pile 4, and with your right hand - pile 2 on pile 1 and with your left hand put pile 3 on top. The cards are again stacked as before.

The use of two hands gives all actions the appearance of ill-conceived actions in advance, and the audience is unaware that the cards are stacked in a predetermined order.

The fourth way

This method also leaves the cards in the same order, just a certain number of cards are transferred from top to bottom of the deck, and it seems that the cards are not shuffled, but only removed.

We hold the cards, as in the previous method. Again, we also divide them into 4 piles, but put the piles on the left one after the other. We put the first pile on the fourth, the second on the first, and the third on the top or bottom of the deck. To bring the deck to its previous position, we use the "bridge", which will be described later.

Author: Louis Hoffmann

We recommend interesting articles Section Spectacular tricks and their clues:

▪ fiery structure

▪ Rolling coins

▪ Fancy coin

See other articles Section Spectacular tricks and their clues.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Data transfer speed record over LiFi 23.01.2022

Kyocera SLD Laser (KSLD), a subsidiary of Kyocera Corporation, has announced the world's fastest LiFi system. The company introduced the DataLight system designed for automotive and consumer applications at CES 2022.

Kyocera SLD Laser is commercializing a new generation of gallium nitride laser light sources for automotive, mobile, lighting and consumer electronics applications.

With data transfer rates of over 90 Gb/s, DataLight is 100 times faster than 5G technology.

The DataLight LiFi uses LaserLight sources with dual emission in the visible and infrared regions of the spectrum. They allow the commercialization of smart lighting systems, including the functions of spatial dynamic lighting, night vision lighting, precise sensing and 3D lidar, as well as power transmission over an optical channel.

DataLight fixtures can be customized for specific customer applications and have great potential for performance optimization using artificial intelligence and machine learning.

Other interesting news:

▪ Indian village of twins

▪ Stress makes the body age faster

▪ Where there are more computers and the Internet

▪ Solar tower lights up Las Vegas

▪ Fluorescent material for accumulation of light from LED lamps

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Children's scientific laboratory. Article selection

▪ article We strangely met and strangely disperse. Popular expression

▪ article Where did the accident at the nuclear power plant take place a few days after the release of a film describing similar events? Detailed answer

▪ article Functional composition of Goldstar / LG TVs. Directory

▪ article Automatic lighting switch. Encyclopedia of radio electronics and electrical engineering

▪ article The map is determined by a simple touch. Focus secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews