Menu English Ukrainian russian Home

Free technical library for hobbyists and professionals Free technical library


ENCYCLOPEDIA OF RADIO ELECTRONICS AND ELECTRICAL ENGINEERING
Free library / Schemes of radio-electronic and electrical devices

Main amplifier for satellite TV tuners. Encyclopedia of radio electronics and electrical engineering

Free technical library

Encyclopedia of radio electronics and electrical engineering / Antenna amplifiers

Comments on the article Comments on the article

The kit for receiving satellite TV programs includes a parabolic antenna, which is installed in such a way that it falls into the line of sight from the satellite, a down converter and a tuner (indoor unit). They are connected to each other by a coaxial cable, the length of which usually should not exceed 15 ... 20 m, but in practice it happens even more. As a result, the signal arriving at the tuner is significantly attenuated, and the quality of the received image deteriorates.

To compensate for attenuation in the cable, I propose a main amplifier (Fig. 1). It is powered by the voltage injected into the cable and is switched on in the middle of the cable. The amplifier is assembled according to a single-stage scheme, its gain is at least 10 dB. It is built on a double-gate low-noise field-effect microwave transistor. The supply voltage is stabilized by a low-power IC DA1. LPF L1-C1, L3-C2 prevent self-excitation of the amplifier and ensure the passage of the supply voltage to the converter.

Main amplifier for satellite TV tuners. Schematic diagram of the main amplifier
Rice. 1. Schematic diagram of the main amplifier

The amplifier is assembled on a printed circuit board (Fig. 2) from foil fiberglass with a thickness of 1,5 mm. All parts are SMD or conventional, with leads of minimum length (to reduce parasitic lead inductances). XW1, XW2 - connectors type "F". L4 has 2 turns of PEVTL-2 wire d0,36 mm, wound on a mandrel d2 mm, which is removed after winding.

Main amplifier for satellite TV tuners. Printed circuit board
Rice. 2. PCB

The amplifier is placed in a brass or cast duralumin case. The body is sealed after adjustment. VT1 can be replaced with a domestic 3P351A-2 (amplifier parameters should improve, but such a transistor is very difficult to find). When setting up, you may have to select the resistor R3 according to the maximum gain of the device as a whole.

Author: V. Fedorov, Lipetsk; Publication: cxem.net

See other articles Section Antenna amplifiers.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

The existence of an entropy rule for quantum entanglement has been proven 09.05.2024

Quantum mechanics continues to amaze us with its mysterious phenomena and unexpected discoveries. Recently, Bartosz Regula from the RIKEN Center for Quantum Computing and Ludovico Lamy from the University of Amsterdam presented a new discovery that concerns quantum entanglement and its relation to entropy. Quantum entanglement plays an important role in modern quantum information science and technology. However, the complexity of its structure makes understanding and managing it challenging. Regulus and Lamy's discovery shows that quantum entanglement follows an entropy rule similar to that for classical systems. This discovery opens new perspectives in the field of quantum information science and technology, deepening our understanding of quantum entanglement and its connection to thermodynamics. The results of the study indicate the possibility of reversibility of entanglement transformations, which could greatly simplify their use in various quantum technologies. Opening a new rule ... >>

Mini air conditioner Sony Reon Pocket 5 09.05.2024

Summer is a time for relaxation and travel, but often the heat can turn this time into an unbearable torment. Meet a new product from Sony - the Reon Pocket 5 mini-air conditioner, which promises to make summer more comfortable for its users. Sony has introduced a unique device - the Reon Pocket 5 mini-conditioner, which provides body cooling on hot days. With it, users can enjoy coolness anytime, anywhere by simply wearing it around their neck. This mini air conditioner is equipped with automatic adjustment of operating modes, as well as temperature and humidity sensors. Thanks to innovative technologies, Reon Pocket 5 adjusts its operation depending on the user's activity and environmental conditions. Users can easily adjust the temperature using a dedicated mobile app connected via Bluetooth. Additionally, specially designed T-shirts and shorts are available for convenience, to which a mini air conditioner can be attached. The device can oh ... >>

Energy from space for Starship 08.05.2024

Producing solar energy in space is becoming more feasible with the advent of new technologies and the development of space programs. The head of the startup Virtus Solis shared his vision of using SpaceX's Starship to create orbital power plants capable of powering the Earth. Startup Virtus Solis has unveiled an ambitious project to create orbital power plants using SpaceX's Starship. This idea could significantly change the field of solar energy production, making it more accessible and cheaper. The core of the startup's plan is to reduce the cost of launching satellites into space using Starship. This technological breakthrough is expected to make solar energy production in space more competitive with traditional energy sources. Virtual Solis plans to build large photovoltaic panels in orbit, using Starship to deliver the necessary equipment. However, one of the key challenges ... >>

Random news from the Archive

Portable 3D printer for skin repair in wound sites 13.05.2018

Researchers at the University of Toronto have created a portable device that helps shape skin at wound sites. According to the project participants, this is the first device of its kind that allows you to apply layers of the necessary materials to the damaged area in just a few minutes.

The development is said to have the potential to make a difference in the treatment of burns and other wounds, where skin grafts are commonly used. Most modern 3D bioprinters are bulky, slow and expensive, which limits their scope. A portable printer, weighing less than a kilogram, created at the university, by contrast, is focused on clinical use. It allows the application of "biological inks", including proteinaceous materials such as collagen, directly to the affected area.

The developers plan to add new features and increase the coverage width, as well as move on to testing the device on patients.

Other interesting news:

▪ Revealed the secret of non-freezing water on Mars

▪ Nestle increases wind power consumption

▪ Dell Latitude 7212 Rugged Extreme Tablet Rugged Tablet

▪ Robospiders for sewers

▪ LED drivers for internal Philips Xitanium 40 and 52 W

News feed of science and technology, new electronics

 

Interesting materials of the Free Technical Library:

▪ section of the site Encyclopedia of radio electronics and electrical engineering. Article selection

▪ article Surgical diseases. Lecture notes

▪ article What is a vaccine? Detailed answer

▪ Article Strychnos poisonous. Legends, cultivation, methods of application

▪ article Computers. Working with CAD programs. Directory

▪ article Accounting for electricity. Installation of meters and electrical wiring to them. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

Name:


Email (optional):


A comment:





All languages ​​of this page

Home page | Library | Articles | Website map | Site Reviews

www.diagram.com.ua

www.diagram.com.ua
2000-2024