OCCUPATIONAL SAFETY AND HEALTH
Instructions for labor protection on fire safety when working in a weaving shop Occupational Safety and Health / Standard instructions for labor protection Fire safety requirements The instruction is an addition to the instruction on fire safety measures for the entire enterprise. 1. Technological equipment of the braiding shop, heating appliances and electrical equipment must be cleaned of combustible materials at least once a shift, and building structures and electric switches - at least once every two weeks. 2. To remove waste, machines must be equipped with local suction. The operation of machines with the ventilation and pneumatic transport systems turned on is prohibited. 3. Dust chambers and cyclones must be kept closed at all times. The waste collected in them must be removed in a timely manner. It is impossible to allow overloading of cyclones and pollution with production wastes of the territory at their locations. 4. During the operation of oil-filled equipment, measures must be taken to exclude the possibility of leakage and spillage of oil and impregnation of wooden structures with it. 5. It is necessary to strictly observe the timing of lubrication of rubbing parts of equipment and bearings. These times must be specified in the workshop instructions. When the temperature of the bearings rises above 45-50°C, the equipment must be stopped to find out and eliminate the causes of overheating. 6. Warming up the glue should be done with steam or electrical appliances. For this purpose, it is recommended to use the safest electrical appliances with water heating. Glue cookers should be located in an isolated room or in another safe place designated for this purpose. Adhesives based on synthetic resins and flammable solvents should be stored in fireproof pantries or metal boxes. 7. In the weaving shop it is prohibited:
8. Free access to materials and semi-finished products must be provided. For fire-fighting purposes, it is not allowed to store other equipment between them. 9. Passages, exits, corridors, stairs are not allowed to clutter up with various items and equipment. 10. It is not allowed to use the attic for storing material assets. 11. At least once a week, all process equipment should be cleaned from dust and fluff. 12. Remove fumes, fluff and dust from machines, electric motors every shift. 13. It is forbidden to clean the premises and equipment using gasoline and solvents, to thaw frozen pipes of various systems using blowtorches. We recommend interesting articles Section Standard instructions for labor protection: ▪ Spring grinder. Standard instruction on labor protection ▪ Line pipeline. Standard instruction on labor protection ▪ Staff of pathoanatomical departments and mortuaries. Standard instruction on labor protection See other articles Section Standard instructions for labor protection. Read and write useful comments on this article. Latest news of science and technology, new electronics: Artificial leather for touch emulation
15.04.2024 Petgugu Global cat litter
15.04.2024 The attractiveness of caring men
14.04.2024
Other interesting news: ▪ Centaur, descendant of Segway ▪ The most capacious hard drive for automotive systems ▪ Microhybrid boom expected by 2017 ▪ Carbon 3D frame will improve lithium-ion battery anodes News feed of science and technology, new electronics
Interesting materials of the Free Technical Library: ▪ section of the site Wonders of nature. Article selection ▪ article Aggressively obedient majority. Popular expression ▪ article Why do owls put snakes in their nests? Detailed answer ▪ article Car painter. Standard instruction on labor protection ▪ article Portrait in a frame. Focus Secret
Leave your comment on this article: All languages of this page Home page | Library | Articles | Website map | Site Reviews www.diagram.com.ua |