Instructions for labor protection when trimming the crowns of trees growing along communication lines

Free technical library

OCCUPATIONAL SAFETY AND HEALTH
Free library / Occupational Safety and Health / Standard instructions for labor protection

Instructions for labor protection when trimming the crowns of trees growing along communication lines

Occupational Safety and Health

Occupational Safety and Health / Standard instructions for labor protection

Comments on the article

Safe Operation

1. General requirements for labor protection

1.1. Persons at least 18 years of age who have passed a medical examination, have been instructed at the workplace and have an electrical safety group are allowed to work as workers employed in trimming the crowns of trees growing along communication lines. In the future, they must undergo repeated briefings at least once every three months.

1.2. A tree pruning worker must know and perform:

safe practices when performing work on pruning crowns;
material storage rules;
rules for using portable ladders;
internal labor regulations regarding the prohibition of being at work in a state of alcoholic excitement;
when traveling to the place of work and back by car, strictly observe the rules for transporting people by car and follow the commands of the senior in the car.

When combining professions, the crown cutter must be instructed and trained in safe working methods for each combined profession and have a corresponding entry in the certificate.

This worker must use PPE in accordance with industry regulations and the collective agreement.

Know and implement the established technology and signaling in its production.

Work only during daylight hours.

1.3. The worker must be aware that in case of violation of the requirements of the instructions, he is liable in accordance with applicable law.

2. Labor protection requirements before starting work

2.1. Put on overalls and tuck them in so that they fit the body well, and also do not have untucked ends and unbuttoned cuffs.

2.2. Check the serviceability of the tool and ladders.

2.3. Receive from the work manager a task for the work to be performed, indicating the place of its production.

2.4. Inspect the place of work, make sure that there are no unauthorized people in the work area.

3. Labor protection requirements during work

3.1. Trimming of tree crowns is carried out only at the place indicated by the master. It is forbidden to move to another site without the permission of the master.

3.2. Trimming of tree crowns is carried out using a ladder. The upper ends of the bowstrings of the ladder are equipped with a device that allows you to fasten the ladder to the tree trunk, for example, with metal half rings, at the ends and in the middle of which sharp spikes are welded.

3.3. Trimming trees using ladders or a telescopic tower is performed by a team of at least 2 people. Along the LS, through the circuits of which DP is not supplied, as well as along the RF lines with a voltage of not more than 120 volts, cutting the crowns of trees from the ground with the help of a lopper is allowed to be performed by one worker.

3.4. It is allowed to trim the crowns of trees growing along the LS that do not have DP chains and RF lines of the 2nd class without removing the voltage from the line by oral order of the technical manager and with a mandatory entry in the operational log.

3.5. If the branches of the trees touch the chains of the DP on the drugs (RF) of the 1st class or lie on them, pruning of the branches is performed with the removal of voltage from these chains and the issuance of a work permit. Before starting work, you need to make sure using the indicator that the voltage from the DP and RF circuits of the 1st class is really removed.

3.6. When collecting branches, care must be taken to avoid injury to the face and bruises during transitions.

4. Labor protection requirements in emergency situations

4.1. In case of injury through workers working nearby, get first aid and, if necessary, go to the nearest medical center by car. Notify the work manager.

5. Labor protection requirements at the end of work

5.1. At the end of work, it is forbidden to leave sawed and hung crowns and branches of trees.

5.1. Tidy up the workplace.

5.2. Tidy up the instrument.

5.3. Report all comments, shortcomings in the work and the measures taken to inform the master.

We recommend interesting articles Section Standard instructions for labor protection:

▪ The driver of the car UAZ-2206. Standard instruction on labor protection

▪ Working with hand woodworking tools. Standard instruction on labor protection

▪ Wide profile machine operator, turner, miller, grinder, polisher, gear cutter, sharpener. Standard instruction on labor protection

See other articles Section Standard instructions for labor protection.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Artificial leather for touch emulation 15.04.2024

In a modern technology world where distance is becoming increasingly commonplace, maintaining connection and a sense of closeness is important. Recent developments in artificial skin by German scientists from Saarland University represent a new era in virtual interactions. German researchers from Saarland University have developed ultra-thin films that can transmit the sensation of touch over a distance. This cutting-edge technology provides new opportunities for virtual communication, especially for those who find themselves far from their loved ones. The ultra-thin films developed by the researchers, just 50 micrometers thick, can be integrated into textiles and worn like a second skin. These films act as sensors that recognize tactile signals from mom or dad, and as actuators that transmit these movements to the baby. Parents' touch to the fabric activates sensors that react to pressure and deform the ultra-thin film. This ... >>

Petgugu Global cat litter 15.04.2024

Taking care of pets can often be a challenge, especially when it comes to keeping your home clean. A new interesting solution from the Petgugu Global startup has been presented, which will make life easier for cat owners and help them keep their home perfectly clean and tidy. Startup Petgugu Global has unveiled a unique cat toilet that can automatically flush feces, keeping your home clean and fresh. This innovative device is equipped with various smart sensors that monitor your pet's toilet activity and activate to automatically clean after use. The device connects to the sewer system and ensures efficient waste removal without the need for intervention from the owner. Additionally, the toilet has a large flushable storage capacity, making it ideal for multi-cat households. The Petgugu cat litter bowl is designed for use with water-soluble litters and offers a range of additional ... >>

The attractiveness of caring men 14.04.2024

The stereotype that women prefer "bad boys" has long been widespread. However, recent research conducted by British scientists from Monash University offers a new perspective on this issue. They looked at how women responded to men's emotional responsibility and willingness to help others. The study's findings could change our understanding of what makes men attractive to women. A study conducted by scientists from Monash University leads to new findings about men's attractiveness to women. In the experiment, women were shown photographs of men with brief stories about their behavior in various situations, including their reaction to an encounter with a homeless person. Some of the men ignored the homeless man, while others helped him, such as buying him food. A study found that men who showed empathy and kindness were more attractive to women compared to men who showed empathy and kindness. ... >>

Random news from the Archive

Motorola Skip NFC tag unlocks smartphone without entering password 18.08.2013

Some time ago, Motorola introduced the flagship smartphone Moto X, one of the main features of which was the ability to "design" the appearance of the device according to your wishes.

Now the company has introduced a curious accessory called the Motorola Skip. The novelty is an NFC tag in the form of a clip that can be attached to clothing. The purpose of the label is to protect the user's smartphone by "replacing" the password. According to the company, an average user unlocks his smartphone 39 times a day, and for active users this number can reach up to 100. And if a person is worried about the safety of his personal data, he sets a password (PIN or graphic pattern), which, respectively, each once you need to enter.

In order to free a person from the need to perform this procedure every time, Skip was created - now you just need to touch the mark with your smartphone. Of course, you first need to synchronize the tag (or rather, the three tags that come with the kit) with your Moto X smartphone. The question of whether this accessory is supported by other models is still open. At first, only two color options will be available: black and gray, but the company promises other options a bit later.

The cost of this accessory is $20.

Other interesting news:

▪ Human hearing depends on hands

▪ Transcend USB 3.0 Flash Drives 128GB and 256GB

▪ Electron microscopy - for children

▪ Monoblock Lenovo Yoga AIO 9i

▪ Electromagnetic generator operating without fuel

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site RF power amplifiers. Article selection

▪ article Who said earlier E. Popular expression

▪ article Which mountain peaks are among the top ten highest in the world? Detailed answer

▪ accumulator article. Directory