Instruction on labor protection for the controller of the Quality Control Department

Free technical library

OCCUPATIONAL SAFETY AND HEALTH
Free library / Occupational Safety and Health / Standard instructions for labor protection

Instruction on labor protection for the controller of the Quality Control Department

Occupational Safety and Health

Occupational Safety and Health / Standard instructions for labor protection

Comments on the article

Safe Operation

1. General requirements for labor protection

1.1. Persons at least 18 years of age who have passed a preliminary medical examination upon admission to work, as well as:

induction training;
unscheduled and targeted briefings;
fire safety briefing;
initial briefing at the workplace;
electrical safety training in the workplace.

1.2. The QCD controller must:

undergo repeated training on labor safety at the workplace at least every three months;
pass a knowledge test on the rules for the design and safe operation of lifting mechanisms;
undergo a sanitary medical examination in accordance with the order of the Ministry of Health of the Russian Federation No. 90 dated March 14, 03.96;
perform only the work that is part of his duties;
use safe working methods;
comply with the requirements of prohibiting, warning, indicative and prescriptive signs and inscriptions, as well as signals given by train compilers, vehicle drivers;
be extremely careful in traffic areas.

1.3. The QCD controller must know:

the impact on a person of dangerous and harmful production factors that arise during work;
requirements for industrial sanitation, electrical safety and fire safety;
location of first aid kits;
internal labor regulations established at the enterprise;
the requirements of this instruction, instructions on fire safety measures, instructions on electrical safety;
appointment of personal protective equipment;
rules and regulations on labor protection, safety and industrial sanitation;
be able to provide first aid to victims, use fire extinguishing equipment, call the fire brigade in the event of a fire.

1.3. The QCD controller in his work must be guided by the requirements of this instruction;

1.4. During operation, the QCD controller may be exposed to the following hazards:

increased humidity and air mobility of the working area;
increased noise levels;
moving vehicles, mechanisms, rolling stock;
insufficient lighting at night.

1.5. The QCD inspector must use a cotton gown and special footwear.

1.6. The QCD controller must comply with the following fire safety requirements:

smoking only in designated areas;
do not touch oxygen cylinders with hands contaminated with oil;
know and be able to use primary fire extinguishing equipment.

1.6. Personal clothing and overalls must be stored separately in lockers and dressing rooms. It is prohibited to take work clothes outside the enterprise.

1.7. Eating should only be in canteens, buffets or specially designated rooms with appropriate equipment. Before eating, wash your hands thoroughly with soap and water.

1.8. For non-compliance with the safety requirements set forth in this manual, the QCD controller is responsible in accordance with applicable law.

2. Safety requirements before starting work

2.1. Before starting work, the QCD controller must:

put on the overalls that are required according to the norms, put it in order;
tuck the loose ends of the clothes so that they do not hang down;
establish the sequence of operations;
inspect your workplace;
check by external inspection the presence and fastening of the ground wire of the electric motor and starting devices, the absence of bare wires;
make sure that the equipment is in good condition (idling), its starting devices, the presence and serviceability of the drive and gear guards;
check the availability and serviceability of the tool;
make sure the workplace is well lit.

3. Safety requirements during work

3.1. Be careful while working.

3.2. Perform only the work assigned by management.

3.3. While the equipment is in operation, do not pass anything through the machine by leaning close to it, and do not touch the moving parts of the machine until it comes to a complete stop.

3.4. When taking samples for control, use only the established passages. Climbing over cars and crawling under them is prohibited

3.5. During work, the controller must perform his duties in the presence and serviceability of fences, blocking devices that ensure labor safety with sufficient illumination of the workplace.

3.6. Do not touch moving mechanisms and rotating parts of machines, as well as energized live parts of equipment.

3.7. Keep the workplace and passages to it clean, avoiding clutter with spare parts.

3.8. Cleaning material must be stored in metal boxes with tight-fitting lids.

4. Safety requirements in emergency situations

4.1. In the event of an emergency, the QCD controller must stop working, immediately inform the master and then follow his commands.

4.3. When eliminating an emergency, it is necessary to act in accordance with the approved plan for eliminating accidents.

4.4. In the event of a fire that could lead to an explosion:

notify the fire brigade immediately;
start extinguishing the fire;
organize the evacuation of people;
organize a meeting with the fire brigade.

In case of electrical fires, use only carbon dioxide or powder fire extinguishers.

4.5. If the insulation of electrical equipment is damaged, stop work, notify the master and resume work only after the damage has been eliminated.

4.6. In case of injury or illness, stop work, transfer duties to another person, notify the master and contact the first-aid post.

5. Safety requirements at the end of work

5.1. At the end of the work, the QCD controller must:

tidy up the workplace and eliminate traces of spilled oil;
put the tool, inventory in a specially designated place;
hand over the carefully cleaned place to the shift worker and inform her and the assistant foreman about the shortcomings noticed during the work.
take off your overalls and put them in the dressing room closet.

5.2. Wash contaminated clothing if necessary.

5.3. Wash your hands, take a shower.

We recommend interesting articles Section Standard instructions for labor protection:

▪ An employee of an enterprise, a book trade organization. Standard instruction on labor protection

▪ Freight Forwarder. Standard instruction on labor protection

▪ Vulcanizer. Standard instruction on labor protection

See other articles Section Standard instructions for labor protection.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Artificial leather for touch emulation 15.04.2024

In a modern technology world where distance is becoming increasingly commonplace, maintaining connection and a sense of closeness is important. Recent developments in artificial skin by German scientists from Saarland University represent a new era in virtual interactions. German researchers from Saarland University have developed ultra-thin films that can transmit the sensation of touch over a distance. This cutting-edge technology provides new opportunities for virtual communication, especially for those who find themselves far from their loved ones. The ultra-thin films developed by the researchers, just 50 micrometers thick, can be integrated into textiles and worn like a second skin. These films act as sensors that recognize tactile signals from mom or dad, and as actuators that transmit these movements to the baby. Parents' touch to the fabric activates sensors that react to pressure and deform the ultra-thin film. This ... >>

Petgugu Global cat litter 15.04.2024

Taking care of pets can often be a challenge, especially when it comes to keeping your home clean. A new interesting solution from the Petgugu Global startup has been presented, which will make life easier for cat owners and help them keep their home perfectly clean and tidy. Startup Petgugu Global has unveiled a unique cat toilet that can automatically flush feces, keeping your home clean and fresh. This innovative device is equipped with various smart sensors that monitor your pet's toilet activity and activate to automatically clean after use. The device connects to the sewer system and ensures efficient waste removal without the need for intervention from the owner. Additionally, the toilet has a large flushable storage capacity, making it ideal for multi-cat households. The Petgugu cat litter bowl is designed for use with water-soluble litters and offers a range of additional ... >>

The attractiveness of caring men 14.04.2024

The stereotype that women prefer "bad boys" has long been widespread. However, recent research conducted by British scientists from Monash University offers a new perspective on this issue. They looked at how women responded to men's emotional responsibility and willingness to help others. The study's findings could change our understanding of what makes men attractive to women. A study conducted by scientists from Monash University leads to new findings about men's attractiveness to women. In the experiment, women were shown photographs of men with brief stories about their behavior in various situations, including their reaction to an encounter with a homeless person. Some of the men ignored the homeless man, while others helped him, such as buying him food. A study found that men who showed empathy and kindness were more attractive to women compared to men who showed empathy and kindness. ... >>

Random news from the Archive

Own FM radio station 06.03.2017

Researchers at the University of Washington (USA) have found a way to make "people's radio" operating in the FM band even more popular. To do this, scientists used the phenomenon of backscattering, in which waves, particles or signals are reflected in the opposite direction, that is, towards the source.

According to the authors of the invention, in any object of everyday life - for example, a poster about the performance of a musical group - you can embed a miniature reflector antenna made of copper tape, which will transmit the necessary information - for example, the song of the ensemble from the poster - "on the tail" of the reflected signals of the air in FM band, but on an adjacent frequency so as not to cause interference. The main advantage of the new device is the minimum amount of energy consumed - 11 microwatts, which will allow such a poster to provide "broadcasting" for two years on one watch battery.

And for those who want to ensure complete independence of their broadcasting, Japanese scientists from Waseda University have developed a way to make printed circuits on ultra-thin, with a diameter of only 750 nanometers, sheets of elastomeric film using a conventional inkjet printer. Silver conductors are applied to the film, then other components, such as resistors or LEDs, are added to them, and the sandwich is sealed with a second layer of film. According to the scientists, their film is 50 times stronger than similar flexible boards and can be stretched without damaging the circuit.

Since a household printer is used in production, the device does not require a special "clean" room, and anyone in the future will be able to print for themselves an "electronic tattoo" with a microcircuit for any occasion - even to control blood sugar, even to monitor muscle contraction, at least to turn yourself into a live Wi-Fi hotspot.

Other interesting news:

▪ Found an important difference between the human brain and other primates

▪ Magnetic nano-probes for cell research

▪ Deadly danger of apples

▪ Slug Wing

▪ The gadget is powered only by the heat of the human body

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the website Electrotechnical materials. Article selection

▪ article Study of control systems. Lecture notes

▪ article In which sport the rules have remained unchanged for more than two millennia? Detailed answer

▪ article Mistletoe white. Legends, cultivation, methods of application

▪ article Power amplifier on 5 transistors. Encyclopedia of radio electronics and electrical engineering

▪ article Low-noise antenna amplifier with balanced input and gain control. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews