Instruction on labor protection for a presser of building ceramics products

Free technical library

OCCUPATIONAL SAFETY AND HEALTH
Free library / Occupational Safety and Health / Standard instructions for labor protection

Instructions on labor protection for a presser of building ceramics products. Full document

Occupational Safety and Health

Occupational Safety and Health / Standard instructions for labor protection

Comments on the article

Safe Operation

1. General safety requirements

1.1. Persons at least 18 years of age who have passed a medical examination and have been trained in safe working methods and techniques are allowed to work as a presser of building ceramics products.

1.2. The presser of a hydraulic press must be provided with overalls, safety shoes and other personal protective equipment.

1.3. The presser of a hydraulic press must comply with the internal regulations adopted at the enterprise, comply with the safety requirements set forth in this manual.

1.4. For non-compliance with the requirements of this manual, the presser is liable in accordance with applicable law.

2. Safety requirements before starting work

Before starting work, the hydraulic press operator must:

2.1. Put on overalls, safety shoes and prepare personal protective equipment for work.

2.2. Check the serviceability of equipment, fixtures.

2.3. Check the workplace, approaches to it for compliance with safety requirements.

2.4. Check the presence and serviceability of fences, blocking and other devices, protective grounding, local lighting

2.5. Accept a shift from a shifter.

3. Safety requirements during work

3.1. When performing work, the presser of a hydraulic press must:

know the rules for the use of technological equipment, fixtures and tools;
know the methods and techniques of safe performance of work;
not to allow unauthorized persons to be near the press and not to entrust their work to them;
do not leave the workplace unattended;
maintain safety devices in working order, in no case should they be removed, disabled or disabled;
make sure that the doors of electrical cabinets are closed with a key.

Before opening electrical cabinets or panels, the presser must turn off the power by turning the general switch.

do not work with elements that are energized or in close proximity to them;
do not remove gratings and guards from moving and rotating parts of the equipment;
do not repair and adjust the press when the equipment is running;
having found a malfunction in the operation of the press, inform the master about it;
work on the press should be carried out with serviceable fixed guards (on the feeder carriage, on the moving parts of the powder feed device on the carriage)
monitor the operation of exhaust hoods that capture dust generated in the pressing zone.

4. Safety requirements in an emergency

4.1. In cases:

sudden power outage;
failure of equipment, interlocks, enclosing devices;
voltage detection on metal parts;
smell of gas, burning, smoke in the workplace

The hydraulic press operator must:

turn off the equipment immediately;
call the staff on duty;
report the incident to the shift foreman;
post a safety sign on the starting device with an explanatory inscription "Do not turn it on, people are working."

4.2. In case of injury, the presser is obliged to notify the master and seek help. If a nearby worker is injured, it is necessary to provide first aid or deliver the victim to the place of first aid, report the incident to the foreman.

4.3. If a fire or ignition is detected, the hydraulic press operator must:

report the fire to the shift foreman;
if it is not possible to report the fire to the foreman, immediately report the fire by phone _______, while you must give the address of the enterprise, the place of ignition of the fire, as well as your last name;
take, if possible, measures to evacuate people, extinguish the fire.

5. Safety requirements upon completion of work

5.1. Upon completion of work, the presser of the hydraulic press must:

turn off the equipment;
tidy up the workplace;
remove the tool to the designated place;
put away overalls and personal protective equipment in a storage place.

5.2. Report all violations of safety requirements that occur during work to the master.

We recommend interesting articles Section Standard instructions for labor protection:

▪ Crane service technician. Standard instruction on labor protection

▪ Chemical analysis laboratory assistant. Standard instruction on labor protection

▪ Working with a kerosene burner. Standard instruction on labor protection

See other articles Section Standard instructions for labor protection.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Artificial leather for touch emulation 15.04.2024

In a modern technology world where distance is becoming increasingly commonplace, maintaining connection and a sense of closeness is important. Recent developments in artificial skin by German scientists from Saarland University represent a new era in virtual interactions. German researchers from Saarland University have developed ultra-thin films that can transmit the sensation of touch over a distance. This cutting-edge technology provides new opportunities for virtual communication, especially for those who find themselves far from their loved ones. The ultra-thin films developed by the researchers, just 50 micrometers thick, can be integrated into textiles and worn like a second skin. These films act as sensors that recognize tactile signals from mom or dad, and as actuators that transmit these movements to the baby. Parents' touch to the fabric activates sensors that react to pressure and deform the ultra-thin film. This ... >>

Petgugu Global cat litter 15.04.2024

Taking care of pets can often be a challenge, especially when it comes to keeping your home clean. A new interesting solution from the Petgugu Global startup has been presented, which will make life easier for cat owners and help them keep their home perfectly clean and tidy. Startup Petgugu Global has unveiled a unique cat toilet that can automatically flush feces, keeping your home clean and fresh. This innovative device is equipped with various smart sensors that monitor your pet's toilet activity and activate to automatically clean after use. The device connects to the sewer system and ensures efficient waste removal without the need for intervention from the owner. Additionally, the toilet has a large flushable storage capacity, making it ideal for multi-cat households. The Petgugu cat litter bowl is designed for use with water-soluble litters and offers a range of additional ... >>

The attractiveness of caring men 14.04.2024

The stereotype that women prefer "bad boys" has long been widespread. However, recent research conducted by British scientists from Monash University offers a new perspective on this issue. They looked at how women responded to men's emotional responsibility and willingness to help others. The study's findings could change our understanding of what makes men attractive to women. A study conducted by scientists from Monash University leads to new findings about men's attractiveness to women. In the experiment, women were shown photographs of men with brief stories about their behavior in various situations, including their reaction to an encounter with a homeless person. Some of the men ignored the homeless man, while others helped him, such as buying him food. A study found that men who showed empathy and kindness were more attractive to women compared to men who showed empathy and kindness. ... >>

Random news from the Archive

A sensor in bed monitors an elderly person 06.05.2007

British scientists have created a sensor system that allows you to monitor an elderly person. As the share of old people in the population of developed countries grows, which is caused both by improved medical care, and an increase in the standard of living, and a decrease in the birth rate, the task arises: to provide the elderly with a comfortable independent life and enable young relatives to monitor the health of their separately living loved ones. .

One version of such a system was created by scientists from the University of Southampton, led by professors Bashir al-Hashimi and David de Roor. Its basis is a wireless network of sensors embedded in a variety of home furnishings. These sensors will constantly monitor the surrounding space and record changes in the state of health. For example, a weight sensor built into the bed mattress detects the movements of the person lying on it.

Sensors in the bathroom and toilet will allow you to monitor the use of the bathroom and notice food-related problems in time. Heat sensors built into armchairs and chairs will be able to detect areas with elevated temperatures on the body - places of possible inflammation.

According to the authors of the development, in the next 12 months they will be able to mount a prototype of such a smart room, which is able to monitor the person in it. True, the question remains: can such a life be called independent?

Other interesting news:

▪ Abandoned mines to save energy

▪ Data transmission over the mains

▪ Headset Logitech G Pro X

▪ Vegetarianism could save millions of lives

▪ folding battery

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ website section LEDs. Article selection

▪ See Aperture Adjustment. video art

▪ article What does the popular Tunisian soda brand Boga have to do with Russia? Detailed answer

▪ article A paper clip holds a self-tapping screw. Personal transport

▪ article A simple frequency synthesizer. Encyclopedia of radio electronics and electrical engineering

▪ article Metal pattern by galvanoplastic method. Chemical experience

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews