OCCUPATIONAL SAFETY AND HEALTH
Instructions on labor protection for a chemical analysis laboratory assistant. Full document Occupational Safety and Health / Standard instructions for labor protection 1. General safety requirements 1.1. The general organization of work on labor protection in the laboratory is assigned to the head of the laboratory. The head of the laboratory is obliged to organize training and briefing of laboratory workers on safety precautions. 1.2. Persons at least 18 years of age who have passed a medical examination, training and certified in accordance with safety regulations when working with aggressive environments are allowed to work in a chemical laboratory. 1.3. Laboratory assistants are allowed to work in the presence of the following personal protective equipment:
1.4. The laboratory room must be equipped with fire-fighting equipment (fire hose with a barrel, fire extinguishers). The head of the laboratory is appointed by order to be responsible for the fire safety of the laboratory. 1.5. In the laboratory premises, a personnel evacuation scheme should be developed and approved in case of fire or other emergencies. Escape doors must open outwards. 1.6. The laboratory must be equipped with supply and exhaust ventilation, have water supply, sewerage, gas and electricity supply, central heating and hot water supply. In addition to general ventilation, the laboratory room must be equipped with ventilation devices for extracting air from fume hoods. The speed of air movement in the section of cabinet doors open at 0,15-0,3 m should be at least 0,7 m/s and at least 1,5 m/s when working with especially harmful substances. 1.7. The number of reagents, flammable and combustible liquids in the laboratory should not exceed the daily requirement. 1.8. Each container of a chemical must be labeled with a clear name of the substance it contains and its concentration. On vessels with toxic substances, in addition, there should be an inscription "poison". 1.9. All toxic substances must be stored in a metal safe. 1.10. Toxic substances must be issued for work on the written permission of the head of the laboratory. An act must be drawn up for the amount of toxic substances consumed. 2. Safety requirements before starting work 2.1. Before starting work, check the condition of the workplace, inventory, as well as the cleanliness of the workplace. 2.2. Wear appropriate clothing and other PPE. 2.3. Turn on the supply and exhaust ventilation 30 minutes before starting work. 3. Safety requirements during work 3.1. Perform only the work that you have been assigned by the head of the laboratory. 3.2. When performing work with increased danger, when working at night and in the evening, at least 2 people should be in the laboratory, while one is appointed as a senior. 3.3. When working with concentrated acids and alkalis without protective devices (glasses, gloves), work is prohibited. When working with fuming nitric acid with a specific gravity of 1,15-1,52, as well as with oleum, in addition to glasses and rubber gloves, a rubber apron should be worn. 3.4. When mixing concentrated solutions of caustic alkalis, it is necessary to wear goggles, and with large amounts of solutions, also rubber gloves and a rubberized apron. 3.5. When splitting large pieces of caustic alkali, it is necessary to wrap the pieces with a cloth or paper, put on goggles and tie a scarf over your head. 3.6. Concentrated nitric, sulfuric and hydrochloric acids should be stored in laboratories in thick-walled glassware with a capacity of no more than 2 liters, in a fume hood, on pallets. Flasks with fuming nitric acid should be stored in special stainless steel boxes. 3.7. Acids, alkalis, and other caustic liquids should be poured using glass siphons with a pear or some other injection device. 3.8. The spill of concentrated nitric, sulfuric and hydrochloric acids and work with them should be carried out only with the draft in the fume hood turned on. In this case, the doors of the fume hoods should be covered as far as possible. 3.9. The work of carrying acids and alkalis is carried out by specially trained persons, while they must observe the following rules:
The laboratory should have a first aid kit with a set of medicines for first aid. 4. Safety requirements in emergency situations 4.1. If acid or alkali is accidentally spilled, it is first covered with sand so that it absorbs them. Then the sand is removed and the place where the acid was spilled, the alkali is covered with lime or soda, and then washed with water and wiped dry. 4.2. In case of a chemical burn, immediately wash the affected area with plenty of running cold water from a tap, rubber hose or bucket for 15-20 minutes. If acid or alkali has got on the skin through clothes, then first you need to wash it off with water from the clothes, then rinse the skin. 4.3. If sulfuric acid in the form of a solid gets on the human body, it must be removed with dry cotton wool or a piece of cloth, and then the affected area should be thoroughly washed with water. With a chemical burn, it is not possible to completely wash off the chemicals with water. Therefore, after washing, the affected area is treated with a solution of baking soda (one teaspoon per glass of water). 4.4. If splashes of alkali or vapors get into the eyes and mouth, rinse the affected areas with plenty of water, and then with a solution of boric acid (0,5 teaspoon of acid per glass of water). 4.5. If acid or alkali enters the esophagus, immediately call an ambulance doctor. You can not wash the stomach with water. A good effect is the ingestion of milk, egg white, vegetable oil, dissolved starch. 5. Safety requirements at the end of work 5.1. At the end of the working day, each laboratory worker is obliged to check and put in order his workplace, instruments and apparatus, turn off the ventilation, check the closing of the taps of gas burners, all electric heaters, the closing of water taps and windows. Check if there are any uncleaned oily rags (rags). Turn off lighting. We recommend interesting articles Section Standard instructions for labor protection: ▪ Roofer. Standard instruction on labor protection ▪ Working with an electric drill. Standard instruction on labor protection ▪ Boiler equipment repairman. Standard instruction on labor protection See other articles Section Standard instructions for labor protection. Read and write useful comments on this article. Latest news of science and technology, new electronics: Artificial leather for touch emulation
15.04.2024 Petgugu Global cat litter
15.04.2024 The attractiveness of caring men
14.04.2024
Other interesting news: ▪ The technology of forming physical keys on touch displays ▪ A new way to wirelessly transmit data ▪ Tablets are more attractive than personal computers ▪ Verbatim SSDs Verbatim Vi3000 and Vi560 S3 range News feed of science and technology, new electronics
Interesting materials of the Free Technical Library: ▪ section of the site Experiments in chemistry. Article selection ▪ article Procrastination is similar to death. Popular expression ▪ Article What is the difference between management and marketing? Detailed answer ▪ article The manager of the dance evening, the leader of the disco. Job description
Leave your comment on this article: All languages of this page Home page | Library | Articles | Website map | Site Reviews www.diagram.com.ua |