Job description for an electrician on lighting and lighting networks

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for an electrician for lighting and lighting networks. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The electrician for lighting and lighting networks is directly subordinate to _______.
The electrician for lighting and lighting networks follows the instructions of _______.
The electrician for lighting and lighting networks replaces _______.
The electrician for lighting and lighting networks is replaced by _______.
The electrician for lighting and lighting networks is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
Upon transfer to another job or dismissal, the Electrician for Lighting and Lighting Networks is responsible for the proper and timely delivery of cases to the person entering this position, and in the absence of such, to the person replacing him or directly to his supervisor.
Must know:

methods of cutting and mounting high-voltage and control cables;
designs of switchboards, consoles;
electrical circuits of lighting networks, methods for checking and regulating electrical equipment;
methods of installation of lighting wiring of all types;
arrangement of electrical installations;
technical conditions for putting objects into operation;
rules for performing work in hazardous areas.

II. Official duties

The Electrician for Lighting and Lighting Networks performs the following job responsibilities:

Performing particularly complex work on the installation of lighting wiring and networks.
Performs related duties in accordance with production needs.

III. Rights

The electrician for lighting and lighting networks has the right to:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The lighting and lighting network electrician is responsible for:

improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine;
violation of the rules and regulations governing the activities of the enterprise;
offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine;
infliction of material damage - within the limits determined by the current labor and civil legislation of Ukraine;
compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information;
compliance with internal regulations, safety and fire safety rules.

We recommend interesting articles Section Job descriptions:

▪ Ad poster. Job description

▪ Bacteriologist. Job description

▪ Chief technologist. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Mean Well HRP/N power supplies 14.02.2021

Mean Well has developed a family of power supplies capable of short-term safe operation at up to 2,5 times the rated power (up to 5 seconds).

The new family consists of three series: HRP-150N, HRP-300N and HRP-600N with power ratings of 150W, 300W and 600W, respectively. In addition, the power supplies have excellent functional saturation: they have a power correction stage (PFC; PFC> 0,95), the ability to compensate for voltage drops on the wires, the ability to remotely turn on / off, and are resistant to input voltage increased up to 300 V (up to 5 seconds) and have a "DC Ok" signal to control the output voltage. With all this, these power supplies are operable in the temperature range of -40 ... 70 ° C and have an efficiency of 89%.

This family of power supplies is in demand in industrial installations using electric motors or with capacitive loads. At the moment of starting, the specified load consumes increased power, therefore, in order to ensure a normal start, a more powerful power source must be selected. In further work after the launch, the power of this source is no longer used and is redundant. Therefore, by using the new HRP/N power supplies, you can get rid of redundancy and gain economic benefits.

The warranty period for the considered power supplies is 5 years.

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Life of remarkable physicists. Article selection

▪ article And you are passionate, Paramosha! Popular expression

▪ article What is required for glass production? Detailed answer

▪ Sedan article. Legends, cultivation, methods of application

▪ article Pulse charger. Encyclopedia of radio electronics and electrical engineering

▪ article Candle passing through the hand. Focus Secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews