Job description for the installer of internal sanitary systems and equipment

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for an installer of internal sanitary systems and equipment. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The installer of internal sanitary systems and equipment is directly subordinate to _______.
The installer of internal sanitary systems and equipment follows the instructions of _______.
The installer of internal sanitary systems and equipment replaces _______.
The installer of internal sanitary systems and equipment is replaced by _______.
The installer of internal sanitary systems and equipment is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
When transferring to another job or dismissal from a position, the Installer of internal sanitary systems and equipment is responsible for the proper and timely delivery of work to the person taking up this position, and in the absence of one, to the person replacing him or directly to his supervisor.
Must know:

rules for testing sanitary systems;
requirements for the readiness of the object for installation;
rules for the delivery of completed work to Gosgortekhnadzor;
rules for marking places for laying pipelines, taking measurements from nature for the placement of equipment and pipelines, drawing rough and measured sketches from nature and according to construction drawings.

II. Official duties

The installer of internal sanitary systems and equipment performs the following job responsibilities:

Performing particularly complex work during the installation and repair of internal central heating, water supply, sewerage, gas supply and drainage systems.
Performs related duties in accordance with production needs.

III. Rights

The installer of internal sanitary systems and equipment has the right to:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The installer of internal sanitary systems and equipment is responsible for:

improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine;
violation of the rules and regulations governing the activities of the enterprise;
offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine;
infliction of material damage - within the limits determined by the current labor and civil legislation of Ukraine;
compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information;
compliance with internal regulations, safety and fire safety rules.

We recommend interesting articles Section Job descriptions:

▪ Own correspondent. Job description

▪ Doctor on duty (paramedic) of the first-aid post. Job description

▪ Carver on saws, hacksaws and machine tools. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Gadget battery charges in one minute 09.04.2015

Scientists from Stanford University have invented a high-performance battery that charges quickly, holds a charge for a long time and has a low cost. The researchers believe the development could replace many types of commercial lithium-ion and alkaline batteries.

The researchers did not report on the capacity of the developed battery, but said that their technology could be used in almost any device - from smartphones to electric cars and wind turbines. If such a battery is placed in a smartphone, it can be fully charged from the mains in one minute, the scientists reported. In modern phones, it takes several hours to charge the battery.

In the design of the new battery, the researchers used aluminum, a promising material for the industry of rechargeable power supplies, which allows to reduce costs, provide a higher charge density and have less flammability.

From aluminum, scientists at Stanford University made an anode - the positive pole of the battery. The cathode (negative pole) they made of graphite. A liquid electrolyte was placed in the battery, enclosed in a polymer bag.

"People have tried various cathode materials. We accidentally found that the best way to use a graphite cathode, which is mostly carbon. We found several types of graphite material with high performance," said Hongjie Dai, professor of chemistry at Stanford University. participating in the development.

Scientists managed to achieve a long service life of the experimental battery. It withstood over 7,5 thousand recharge cycles without loss of properties. Previous prototype aluminum batteries degraded after only 100 cycles, Dai said. In comparison, today's batteries last about a thousand cycles without significant loss of capacity.

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Reference materials. Article selection

▪ article Young everywhere is dear to us. Popular expression

▪ article Where is the prestigious area where cars are prohibited? Detailed answer

▪ article Why is the sky blue? Children's Science Lab

▪ article Mirror halogen lamps. Encyclopedia of radio electronics and electrical engineering

▪ article Table of spiritists. Focus Secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews