Job description for the installer of ventilation, air conditioning, pneumatic transport and aspiration systems

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for an installer of ventilation, air conditioning, pneumatic transport and aspiration systems. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The installer of ventilation, air conditioning, pneumatic transport and aspiration systems is directly subordinate to _______.
The installer of ventilation, air conditioning, pneumatic transport and aspiration systems follows the instructions of _______.
The installer of ventilation, air conditioning, pneumatic transport and aspiration systems replaces _______.
The installer of ventilation, air conditioning, pneumatic transport and aspiration systems is replaced by _______.
An installer of ventilation, air conditioning, pneumatic transport and aspiration systems is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
When transferring to another job or being released from a position, the Installer of ventilation, air conditioning, pneumatic transport and aspiration systems is responsible for the proper and timely delivery of work to the person taking up the current position, and in the absence of one, to the person replacing him or directly to his supervisor.
Must know:

principles of operation of mounted systems and their elements;
ways of laying out mounting axes and elevations;
rules for testing, assembly and disassembly, running-in, start-up, adjustment and comprehensive testing of installed equipment and ventilation systems;
rules for the implementation of sketches and wiring diagrams;
methods of aerodynamic testing of ventilation systems.

II. Official duties

The ventilation system installer performs the following job responsibilities:

Performing particularly complex work during the installation of ventilation, air conditioning, pneumatic transport and aspiration systems and equipment.
Performs related duties in accordance with production needs.

III. Rights

The installer of ventilation, air conditioning, pneumatic transport and aspiration systems has the right:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The installer of ventilation, air conditioning, pneumatic transport and aspiration systems is responsible for:

improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine;
violation of the rules and regulations governing the activities of the enterprise;
offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine;
infliction of material damage - within the limits determined by the current labor and civil legislation of Ukraine;
compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information;
compliance with internal regulations, safety and fire safety rules.

We recommend interesting articles Section Job descriptions:

▪ Bar manager. Job description

▪ Trolleybus driver. Job description

▪ Cost estimate engineer of the design and estimate department. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Molecules stopped at absolute zero temperature 09.04.2020

A group of US physicists have cooled sodium-lithium molecules to a temperature of 220 nanokelvins by colliding with ultracold sodium atoms.

Evaporative cooling is used both to lower our body temperature when we sweat, and to cool rooms and appliances. The nature of this phenomenon is that the hot particles of the cooled system collide with coolant particles, transferring their momentum to them, and the latter, in turn, leave the system.

In atomic physics, evaporative cooling is used to reduce the energy of vibrations of an ensemble of atoms. The technology uses an electromagnetic field to trap atoms in an optical trap. Over time, the atoms collide with each other and some of them become more mobile than others. Such high-energy atoms leave the trap, thereby lowering the energy of the entire system and lowering the temperature of the remaining atoms.

Cooled quantum systems can be used as a simulator of various systems of condensed matter physics or nuclear physics. However, individual atoms have too few degrees of freedom, which limits the capabilities of the simulator. Over the past 15 years, serious progress has been made in cooling more complex objects such as molecules, but, unfortunately, the temperatures achieved have so far been limited to tens of millikelvins.

Physicists from the Massachusetts Institute of Technology and Harvard University, led by Professor Alan Jamison, have for the first time managed to cool an ensemble of molecules by evaporative cooling to a temperature of 220 nanokelvins. To do this, the scientists placed 30 NaLi molecules and 100 sodium atoms in an optical trap in which the particles were held by an electromagnetic field.

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Electrician in the house. Article selection

▪ Article Competition. Crib

▪ How Does Color Blindness Occur? Detailed answer

▪ Khsren Meadow's article. Legends, cultivation, methods of application

▪ article Voltage stabilizer for a car battery. Encyclopedia of radio electronics and electrical engineering

▪ article Audio converter set-top boxes from CCIR and vice versa. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews