Job description for the chief power engineer

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for the chief power engineer. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The chief power engineer belongs to the category of managers.
A person with a higher professional (technical) education and work experience in the specialty in engineering and management positions in the industry corresponding to the profile of the enterprise for at least 5 years is appointed to the position of chief power engineer.
Appointment to the position of chief power engineer and dismissal from it is carried out by order of the director of the enterprise.
The chief power engineer must know:

regulatory and methodological materials on the energy service of the enterprise;
profile, specialization and features of the organizational and technological structure of the enterprise, prospects for its development;
fundamentals of production technology of the enterprise;
organization of energy supply of production in the industry and at the enterprise;
a unified system of preventive maintenance and rational operation of equipment;
production capacities, technical characteristics, design features and modes of operation of power equipment, power-using installations, rules and operation;
the procedure and methods for planning the operation of equipment and the production of repair work;
regulations, instructions and other guidance materials on the development and execution of technical documentation;
rules for acceptance and delivery of equipment after installation and repair;
environmental legislation;
requirements for the rational organization of labor in the operation, repair and modernization of power equipment;
the procedure for developing norms for the consumption of fuel and energy resources;
the procedure for concluding contracts for the supply of an enterprise with electricity, steam, water and other types of energy;
advanced domestic and foreign experience in the field of energy supply for production;
fundamentals of economics, organization of production, labor and management;
labor legislation;
rules and norms of labor protection, safety precautions, industrial sanitation and fire protection;

The chief power engineer reports directly to the chief engineer (technical director).
During the absence of the chief power engineer (business trip, vacation, illness), his duties are performed by a deputy (in the absence of such a person appointed in the prescribed manner), who acquires the relevant rights and is responsible for their proper execution.

II. Official duties

Chief Power Engineer:

Organizes technically correct operation and timely repair of energy and environmental protection equipment and energy systems, uninterrupted supply of electricity, steam, gas, water and other types of energy, control over the rational use of energy resources at the enterprise, consistent compliance with the savings regime.
Manages the organization and planning of the work of power plants and farms, the development of repair schedules for power equipment and power networks, plans for the production and consumption of electricity, process fuel, steam, gas, water, compressed air, consumption rates and modes of consumption of all types of energy by the enterprise.
Ensures the preparation of applications and the necessary calculations for them for the purchase of power equipment, materials, spare parts, for the supply of electric and thermal energy to the enterprise and the connection of additional power to energy supply enterprises, the development of measures to reduce energy consumption rates, the introduction of new technology that contributes to a more reliable, economical and safe operation of power plants, as well as increasing labor productivity.
Participates in the development of plans for the long-term development of the energy sector, plans to improve production efficiency, in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of integrated mechanization and automation of production processes, in the consideration of projects for the reconstruction and modernization of the energy supply systems of the enterprise and its divisions, in the preparation of technical specifications for design of new and reconstruction of existing power facilities.
Gives conclusions on the developed projects, participates in testing and acceptance of power plants and networks for commercial operation.
Ensures work on the protection of underground structures and communications, organizes the verification of communications, signaling, accounting, control, protection and automation, as well as the timely presentation of boilers and pressure vessels to the authorities exercising state technical supervision.
Organizes the development of measures to improve the efficiency of the use of fuel and energy resources, the reliability and efficiency of power plants, the prevention of accidents, the creation of safe and favorable working conditions during their operation.
Carries out control over compliance with the rules of labor protection and safety, instructions for the operation of power plants and the use of power equipment and networks.
Concludes contracts with third-party organizations for the supply of the enterprise with electricity, steam, water and other types of energy, monitors their implementation.
Organizes the storage, accounting of the presence and movement of equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector, accidents and their causes.
Carries out work on the exchange of experience in the field of operation of power equipment, saving and rational use of fuel and energy resources, contributes to the achievement of high performance in the operation of power plants.
Ensures the improvement of the organization of labor in the areas of energy facilities, certification and rationalization of jobs, the introduction of advanced methods of repair and operation of power equipment.
Gives opinions on rationalization proposals and inventions related to the improvement of power equipment and energy supply, organizes the implementation of the adopted proposals.
Supervises the employees of the department and subdivisions of the enterprise that provide energy services to production, organizes work to improve the skills of employees.

III. Rights

The chief power engineer has the right:

Act on behalf of the department, represent the interests of the enterprise in relations with other structural divisions of the enterprise, organizations and public authorities.
Request and receive from the heads of structural divisions of the enterprise and specialists the necessary information.
To check the activities of the structural divisions of the enterprise that provide energy services to production.
Disconnect from networks electrical, thermal, steam and other installations that are in poor condition, the threat of an accident, accidents.
Participate in the preparation of draft orders, instructions, instructions, as well as estimates, contracts and other documents related to the energy service of the enterprise.
Interact with the heads of all structural divisions on issues related to the activities of the energy sector.
Give instructions to the heads of structural divisions of the enterprise on issues of energy maintenance of production.
Within its competence, sign and endorse documents; issue under his signature orders for the enterprise on issues of energy maintenance of production.
Independently conduct correspondence with the structural divisions of the enterprise, as well as other organizations on issues within its competence.
Make proposals to the director of the enterprise on bringing officials to material and disciplinary liability based on the results of inspections; suspend from work or transfer in the prescribed manner employees who have not passed the test of knowledge of the rules for the technical operation of power plants and safety regulations.

IV. A responsibility

The Chief Power Engineer is responsible for:

For improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Large format printer. Job description

▪ Franchise Specialist. Job description

▪ Workshop manager. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

64-layer 3D NAND BiCS Flash ICs 64 GB 23.02.2017

Toshiba introduced 64-layer BiCS flash memory chips with a bulky layout. New chips allow you to store 512 Gbit (64 GB) of information. Each cell is capable of storing three bits (TLC NAND).

The new memory chips will be used to create solid state drives aimed at consumer and industrial segments. Toshiba promises to start the first deliveries before the end of the month, and mass production is scheduled for the second half of the year.

The next step in the manufacturer's plans is the release of a 1 TB solution, consisting of 16 BiCS chips in one package. The first samples of such products will appear in April.

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Frequency synthesizers. Selection of articles

▪ article Ambiguous fame and unambiguous talent. Popular expression

▪ What is unique about France in IX-XI? Detailed answer

▪ article Working on a hydraulic horizontal press for pressing paper waste type MAG 102F, SELOSSE, DIXI. Standard instruction on labor protection

▪ article Electrician's Handbook. Directory

▪ article The correct amount. Focus Secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews