Job description for a glazier

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a glazier. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The glazier reports directly to _______.
The glazier follows the instructions of _______.
Glazier replaces _______.
The glazier is replaced by _______.
When transferring to another job or dismissal from office, the Glazier is responsible for the proper and timely delivery of cases to the person entering this position, and in the absence of such, to the person replacing him or directly to his supervisor.
Must know:

methods and techniques for performing complex glass work;
methods of hollow glass parts;
ways of inserting glass into curvilinear frames.

II. Official duties

The glazier performs the following duties:

Cutting and inserting display and mirror glass and special types of glass (patterned, tempered, electrically heated, corrugated) in all types of frames.
Cutting and inserting all types of glass into round, oval, semi-circular and other curved frames.
Installation and replacement of prisms and lenses.
Glazing of railings for elevator shafts, stairs and balconies with fixing with tension screws.
Glass turning.
Change of glass in showcases.

III. Rights

The glazier has the right:

Get acquainted with the draft decisions of the management of the enterprise regarding its activities.
Participate in the discussion of issues related to their official duties.
Submit proposals for the improvement of the work related to the duties provided for in this instruction for consideration by your immediate supervisor.
Within the limits of his competence, inform his immediate supervisor of all shortcomings identified in the course of the performance of official duties and make proposals for their elimination.

IV. A responsibility

The glazier is responsible

For improper performance or non-performance of their official duties, as well as for non-use or directly to their rights provided for by this Job Description - to the extent determined by the current legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor legislation on labor of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Jeweler assembler. Job description

▪ Accountant. Job description

▪ Gluer. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

MAX9729 - new headphone amplifier 23.04.2008

Maxim Integrated Products introduced the MAX9729 Highly Integrated ICs, which are headphone amplifiers with patented DirectDrive technology. Built-in software-launched audio boost and volume controls make the MAX9729 ideal for size-critical, high-performance portable applications.

A self-tuning audio input and a 3:1 stereo input multiplexer also help reduce system size and cost. In addition, the MAX9729 uses the latest crackle and noise reduction circuitry from Maxim Integrated Products, which eliminates audible noise during power supply on and off. The audio frequency response boost circuitry improves playback quality when using inexpensive headphones.

The built-in volume control circuit has 32 discrete levels of control and uses a smoothing function to ensure smooth volume changes when turning off and selecting an input. Eight different maximum gain programming modes allow you to play input signals over a wide range of levels.

Other interesting news:

▪ Protecting spin qubits from external noise

▪ Unannounced smartphone All New HTC One has already been cloned

▪ Shark warning system

▪ Optimal combination of crops and solar panels

▪ Dell Inspiron Zino HD

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site for those who like to travel - tips for tourists. Article selection

▪ article The road to the temple. Popular expression

▪ article What crime did Burke and Hay commit? Detailed answer

▪ article Concept Safety of production activities

▪ article Engine management system Motronic 1.3. Encyclopedia of radio electronics and electrical engineering

▪ article Powerful compact voltage converter. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews