The unannounced smartphone All New HTC One has already been cloned. Free Technical Library News

NEWS OF SCIENCE AND TECHNOLOGY, NOVELTY IN ELECTRONICS
Free technical library / timeline

Unannounced smartphone All New HTC One has already been cloned

11.03.2014

No sooner had HTC released an updated flagship smartphone, which, according to rumors, will be called All New HTC One (code designation - M8), as China has already created a "cloned" version of the upcoming gadget. The device was developed by Goophone, which was previously seen copying well-known products.

The novelty called Goophone M8 has a 5-inch display with a resolution of 1920 x 1080 pixels, an eight-core MediaTek MT6592 processor with a clock speed of 1,7 GHz, a Mali-450 graphics accelerator and an integrated GPS receiver, 1 GB of RAM and 16 GB of internal memory.

The main camera has a 12,6-megapixel matrix and LED flash. There is also a front-facing 5-megapixel camera for video calls. The battery capacity is 2800 mAh. The operating system Android 4.2 is used as a software basis.

You can buy the Goophone M8 smartphone, equipped with two slots for SIM-cards, now at a price of $230. The announcement of the role model, All New HTC One, is scheduled for March 25th.

According to unofficial data, the Taiwanese manufacturer will endow its flagship device with a 5-inch Full HD screen, a Qualcomm Snapdragon 800 quad-core chip, 2 GB of RAM, a 2900 mAh battery and Android 4.4 KitKat software platform with a proprietary Sense 6 interface. on-screen control buttons and advanced focus system.

<< Back: Dell Latitude 13 Education Series Laptops 12.03.2014

>> Forward: Pico projector for mobile devices 11.03.2014

Latest news of science and technology, new electronics:

The existence of an entropy rule for quantum entanglement has been proven 09.05.2024

Quantum mechanics continues to amaze us with its mysterious phenomena and unexpected discoveries. Recently, Bartosz Regula from the RIKEN Center for Quantum Computing and Ludovico Lamy from the University of Amsterdam presented a new discovery that concerns quantum entanglement and its relation to entropy. Quantum entanglement plays an important role in modern quantum information science and technology. However, the complexity of its structure makes understanding and managing it challenging. Regulus and Lamy's discovery shows that quantum entanglement follows an entropy rule similar to that for classical systems. This discovery opens new perspectives in the field of quantum information science and technology, deepening our understanding of quantum entanglement and its connection to thermodynamics. The results of the study indicate the possibility of reversibility of entanglement transformations, which could greatly simplify their use in various quantum technologies. Opening a new rule ... >>

Mini air conditioner Sony Reon Pocket 5 09.05.2024

Summer is a time for relaxation and travel, but often the heat can turn this time into an unbearable torment. Meet a new product from Sony - the Reon Pocket 5 mini-air conditioner, which promises to make summer more comfortable for its users. Sony has introduced a unique device - the Reon Pocket 5 mini-conditioner, which provides body cooling on hot days. With it, users can enjoy coolness anytime, anywhere by simply wearing it around their neck. This mini air conditioner is equipped with automatic adjustment of operating modes, as well as temperature and humidity sensors. Thanks to innovative technologies, Reon Pocket 5 adjusts its operation depending on the user's activity and environmental conditions. Users can easily adjust the temperature using a dedicated mobile app connected via Bluetooth. Additionally, specially designed T-shirts and shorts are available for convenience, to which a mini air conditioner can be attached. The device can oh ... >>

Energy from space for Starship 08.05.2024

Producing solar energy in space is becoming more feasible with the advent of new technologies and the development of space programs. The head of the startup Virtus Solis shared his vision of using SpaceX's Starship to create orbital power plants capable of powering the Earth. Startup Virtus Solis has unveiled an ambitious project to create orbital power plants using SpaceX's Starship. This idea could significantly change the field of solar energy production, making it more accessible and cheaper. The core of the startup's plan is to reduce the cost of launching satellites into space using Starship. This technological breakthrough is expected to make solar energy production in space more competitive with traditional energy sources. Virtual Solis plans to build large photovoltaic panels in orbit, using Starship to deliver the necessary equipment. However, one of the key challenges ... >>

New method for creating powerful batteries 08.05.2024

With the development of technology and the expanding use of electronics, the issue of creating efficient and safe energy sources is becoming increasingly urgent. Researchers at the University of Queensland have unveiled a new approach to creating high-power zinc-based batteries that could change the landscape of the energy industry. One of the main problems with traditional water-based rechargeable batteries was their low voltage, which limited their use in modern devices. But thanks to a new method developed by scientists, this drawback has been successfully overcome. As part of their research, scientists turned to a special organic compound - catechol. It turned out to be an important component that can improve battery stability and increase its efficiency. This approach has led to a significant increase in the voltage of zinc-ion batteries, making them more competitive. According to scientists, such batteries have several advantages. They have b ... >>

Alcohol content of warm beer 07.05.2024

Beer, as one of the most common alcoholic drinks, has its own unique taste, which can change depending on the temperature of consumption. A new study by an international team of scientists has found that beer temperature has a significant impact on the perception of alcoholic taste. The study, led by materials scientist Lei Jiang, found that at different temperatures, ethanol and water molecules form different types of clusters, which affects the perception of alcoholic taste. At low temperatures, more pyramid-like clusters form, which reduces the pungency of the "ethanol" taste and makes the drink taste less alcoholic. On the contrary, as the temperature increases, the clusters become more chain-like, resulting in a more pronounced alcoholic taste. This explains why the taste of some alcoholic drinks, such as baijiu, can change depending on temperature. The data obtained opens up new prospects for beverage manufacturers, ... >>

Random news from the Archive

The world's largest 3D printer has been built 23.04.2024

3D printing technologies continue to demonstrate their potential in areas ranging from medicine to industry. The world's largest 3D printer was recently unveiled at the University of Maine, promising to change the way construction is done and address some of today's problems, such as the affordable housing shortage and environmental impacts.

The University of Maine has unveiled the world's largest 3D printer, called Factory of the Future 1.0, which is four times larger than previous models. This printer opens up new perspectives in the field of 3D printing, especially in the context of bio-based housing construction.

The new printer, housed at the university's Center for Advanced Structures and Composites, represents a significant step forward in 3D printing research. It expands the technology's capabilities to offer a potential solution to homelessness and the affordable housing shortage.

The printer can create objects up to 29 meters long, 10 meters wide and 5,5 meters high, consuming up to 220 kilograms of material per hour. This means it can be used to create a variety of structures, including residential buildings and defense structures.

Representatives from various ministries, including defense, energy and housing, have expressed interest in using the new technology. The printer is considered a "beacon of innovation" that could change the way construction is done to be more efficient and environmentally friendly.

The printer has already been successfully used to create objects ranging from boats to residential structures. Its capabilities and potential are very extensive, which opens the door to solving modern problems and promises further developments in the field of 3D printing and construction.

The presented 3D printer represents a significant breakthrough in the field of construction and industry. His ability to create objects from biomaterials opens new perspectives for solving modern problems such as the shortage of affordable housing and harmful environmental impacts.

See full Archive of science and technology news, new electronics

All languages of this page

Home page | Library | Articles | Website map | Site Reviews