Job description for a turner-borer

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a lathe-borer. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The turner-borer is directly subordinated to _______.
The turner-borer follows the instructions of _______.
Turner-borer replaces _______.
The turner-borer is replaced by _______.
A lathe-borer is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
When transferring to another job or being released from a position, the Boring Turner is responsible for the proper and timely delivery of work to the person taking up the current position, and in the absence of one, to the person replacing him or directly to his supervisor.
Must know:

design and rules for checking the accuracy of boring machines;
methods for installing fastenings and alignment of complex parts and the universal special devices required for this;
device, geometry and rules of heat treatment, sharpening and finishing of all types of cutting tools.

II. Official duties

Turner-borer performs the following duties:

Processing of complex experimental and expensive parts and tools according to grades 1-5 with a large number of transitions and settings, with places that are difficult to access for processing and measurement, and also requiring combined fastening and precise alignment in various planes when installing on boring machines of various types and designs.
Coordinate boring of holes without devices with movement along coordinates using indicators and microscopic tiles.
Processing of parts and assemblies using racks, boring bars, flying supports and milling heads.
Cutting complex threads using threaded calipers of various designs.
Processing of complex large-sized parts and assemblies, as well as thin-walled parts subject to deformation, on unique boring machines.

III. Rights

Turner-borer has the right:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The turner-borer is responsible for:

improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine;
violation of the rules and regulations governing the activities of the enterprise;
offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine;
infliction of material damage - within the limits determined by the current labor and civil legislation of Ukraine;
compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information;
compliance with internal regulations, safety and fire safety rules.

We recommend interesting articles Section Job descriptions:

▪ Land surveyor of the city administration. Job description

▪ Methodist-psychologist. Job description

▪ Business consultant. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Tantalum Innovation to Improve Fusion Reactors 20.12.2023

Engineers from the University of Wisconsin-Madison from the United States have presented an innovative method for lining the internal walls of a fusion reactor using tantalum. The proposed technology is designed to make the reactor more compact, as well as facilitate maintenance and repair processes.

A new technological advance in fusion reactor cladding opens up prospects for more efficient and compact use of this energy technology. Innovations like these make important contributions to the development of clean and sustainable energy sources, but also highlight the importance of further research into fusion energy.

The uniqueness of the method lies in the use of cold spraying of tantalum (a metal resistant to high temperatures) onto the surface of stainless steel. The material applied in this way is able to trap more hydrogen particles, which reduces the size of the fusion device.

Because ionized hydrogen particles sometimes escape from the plasma and are neutralized, some energy is lost. Therefore, creating a highly permeable surface of the reactor walls plays an important role.

The process of creating a coating using cold spray tantalum is similar to using a can of spray paint. Particles from the can are supersonically directed to the surface, flattened upon impact, covering the entire surface and maintaining nano-sized boundaries between particles. These microscopic boundaries prove effective in trapping hydrogen particles.

The researchers plan to use their new material in the WHAM facility. The experimental device, under construction near Madison, Wisconsin, will serve as a prototype for a future next-generation fusion power plant being developed by UW-Madison's Realta Fusion company. The WHAM experiment is conducted at the Physical Sciences Laboratory as a collaboration between UW-Madison, MIT, and Commonwealth Fusion Systems.

Other interesting news:

▪ Chinese electric bus BYD - 325 km on a single charge

▪ New ways of liver regeneration have been found

▪ Foam instead of conditioner

▪ Mobile phone that works without cellular operators

▪ Salt heating

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Clocks, timers, relays, load switches. Article selection

▪ thermos article. History of invention and production

▪ article What is FIFA? Detailed answer

▪ article Kotovnik small-flowered. Legends, cultivation, methods of application

▪ article Installation of cable wiring. Encyclopedia of radio electronics and electrical engineering

▪ article Relaxation oscillations. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews