Job description for the operator of machine tools with program control

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for the operator of machine tools with program control. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The operator of machine tools with program control is directly subordinated to _______.
The operator of machine tools with program control follows the instructions of _______.
The operator of machine tools with program control replaces _______.
The operator of machine tools with program control is replaced by _______.
The operator of machine tools with program control is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
Must know:

the device and kinematic diagrams of various machine tools with program control and the rules for their adjustment, the rules for setting up and adjusting control and measuring tools and instruments;
methods of installation and alignment of parts;
fundamentals of the theory of cutting metals within the scope of the work performed;
rules for determining cutting conditions according to reference books and machine data sheets;
principles of calibration of complex profiles;
rules for reading drawings of machined parts.

Upon transfer to another job or dismissal from the post, the Operator of machine tools with program control is responsible for the proper and timely delivery of cases to the person entering this position, and in the absence of such, to the person replacing him or directly to his supervisor.

II. Official duties

The operator of machine tools with program control performs the following job responsibilities:

Conducting the processing process from the control panel of complex parts with a large number of transitions, requiring rearrangements of parts and their combined fastening in 6-7 grades on machine tools with program control.
Processing of trial parts after adjustment.
Associated duties as required by business needs.

III. Rights

The operator of machine tools with program control has the right to:

give assignments to subordinate employees, tasks on a range of issues included in his functional duties;
control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him;
to request and receive the necessary materials and documents related to the issues of their activities and activities of employees subordinate to him;
interact with other services of the enterprise on production and other issues that are part of its functional duties;
get acquainted with the draft decisions of the company's management regarding the activities of the Division;
propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description;
submit for consideration by the head of the proposal on the promotion of distinguished employees, the imposition of penalties on violators of production and labor discipline;
report to the manager on all identified violations and shortcomings in connection with the work performed.

IV. A responsibility

The CNC machine operator is responsible for:

improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the labor legislation of Ukraine;
violation of the rules and regulations governing the activities of the enterprise;
offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine;
infliction of material damage - within the limits determined by the current labor and civil legislation of Ukraine;
compliance with current instructions, orders and orders for the preservation of trade secrets and confidential information;
compliance with internal regulations, safety and fire safety rules.

We recommend interesting articles Section Job descriptions:

▪ Warehouse manager of a trading company. Job description

▪ Truck driver. Job description

▪ Smoker of sausage cheese. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

A method for spontaneous learning of memristor neural networks has been developed 24.03.2021

A new technology that can improve the learnability of artificial neural networks has been unveiled by an international team of researchers affiliated with the Ulsan National Institute of Science and Technology (UNIST) and Tsinghua University in China.

The proposed method exploits the "resistance drift" (rise in electrical resistance) of a phase change material in semiconductor memory during training. Information updates are recorded by increasing the electrical resistance in the memristor, which acts as a synapse and additionally takes into account the relationship between the changing template and the training data.

The effectiveness of this method was demonstrated using experimental phase change memristor (PCM) arrays that worked as a neural network. In tests to classify handwritten text consisting of numbers from 0 to 9, such devices showed the effect of improving learning ability by about 3%. In particular, the recognition accuracy of the number 8, which is traditionally difficult to classify in handwritten form, has significantly increased. The learning ability has improved due to the synapse update pattern, which changes depending on the complexity of the classification.

An important advantage of the new method is that the learnability can be improved without additional energy costs, since the resistance of the PCM increases spontaneously due to structural relaxation after the transition to the amorphous phase.

The researchers expect that their results will contribute to the development of learning algorithms that use the properties of memristor devices and open up a new direction in the development of neuromorphic computing chips.

Other interesting news:

▪ Schumacher battery collection

▪ The Alps are growing up

▪ American robot walked 23 km 335 m

▪ Chlamydomonas as a draft force

▪ Testosterone prevents men from thinking

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the website Electrotechnical materials. Article selection

▪ article Eat from the tree of the knowledge of good and evil. Popular expression

▪ article Who gave the name to the city of Los Angeles? Detailed answer

▪ article Head of the rental department. Job description

▪ Clay's article. Simple recipes and tips

▪ article Scheme, pinout (wiring) cable Ericsson T28s (max3232). Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews