Job description for a truck driver

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a truck driver. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

A truck driver drives trucks of all types and brands classified in one of the vehicle categories "b" or "C". A driver of category "B" drives vehicles with a carrying capacity of up to 3,5 tons, tows trailers weighing up to 750 kg. A driver of category "C" drives vehicles with a carrying capacity of more than 3,5 tons, tows trailers weighing more than 750 kg.
The driver reports directly to the chief engineer or chief. factory mechanic.
Employment and dismissal is formalized by order of the director of the plant.
The driver can be a person without presenting the requirements for secondary education, who has a driver's license.
A class 1 qualification can be awarded with a continuous work experience of at least two years as a driver of a class 2 car at a given enterprise, having categories of vehicles "B", "C", "D", "E".
A 2nd class qualification can be awarded with a continuous work experience of at least 3 years as a driver of a 3rd class car at a given enterprise, having any three categories of vehicles.
The driver must know the purpose, device, principle of operation, operation and maintenance of units, mechanisms and devices of cars, their malfunctions, traffic safety rules, rules for the technical operation of cars, the frequency and basic rules for performing maintenance work.
The driver is guided in the work of this manual.

II. Official duties

The truck driver must:

To drive trucks of all brands and types, assigned to one of the categories of vehicles "B" or "C".
Refuel the vehicle with fuel, lubricants and coolant.
Before leaving the line, make sure that all the details of the waybill are filled in completely and correctly, leave the garage only on correctly drawn up waybills.
Check the technical condition of the car before leaving the line, sign the waybill at Ch. mechanic about the technically sound condition of the car.
Pass a daily pre-trip medical check-up.
Hand over the car and put it in the designated place upon returning from work to the factory.
Eliminate vehicle malfunctions that have arisen while working on the line.
Carry out current car repairs, carry out daily maintenance, first and second maintenance, prepare the car for technical inspection.
Carry out the production tasks established by Ch. engineer and chief mechanic, to prevent downtime, disruption of applications. Submit to the heads of departments of the plant, at the disposal of which he is sent to work.
Observe the rules of the road and the rules of the technical operation of vehicles.
Observe the rules for the operation of batteries and car tires, rationally use fuels and lubricants and spare parts for the car.
Observe the norms, rules, instructions, orders and instructions on safety, fire safety and industrial sanitation.
Keep the car clean, clean the garage area and utility room.
Comply with the rules for submitting vehicles for loading and unloading cargo, check that the stowage and securing of cargo on the vehicle complies with traffic safety requirements and ensure the safety of the vehicle.
Be polite with the customer.
Maintain a set of hand tools for emergency vehicle repairs in good condition.
Keep the car in a complete condition.
Comply with internal labor regulations.
Know the call rules:

fire brigade in the event of a fire or the possibility of its fire;
ambulance for injuries, burns, poisoning.

III. Rights

The truck driver has the right to:

Get acquainted with the draft decisions of the management of the enterprise regarding its activities.
Participate in the discussion of issues related to their official duties.
Submit proposals for the improvement of the work related to the duties provided for in this instruction for consideration by your immediate supervisor.
Within the limits of his competence, inform his immediate supervisor of all shortcomings identified in the course of the performance of official duties and make proposals for their elimination.

IV. A responsibility

The truck driver is responsible for:

For improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Loan accountant. Job description

▪ Head of the customs brokerage department. Job description

▪ Duty apparatchik HVO boiler. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

From a dog's point of view 30.04.2012

High-tech dog glasses, designed by a team of engineers and physiologists from the USA, Holland and Belgium, not only allow you to register everything that the animal sees, but also show what exactly in the field of view its eyes are directed. The resulting picture from two video cameras (one looks at the world, the other looks at the dog's eyes) is transmitted via radio to a computer.

Glasses are used to study the behavior of dogs and their interaction with a person: for example, what does the dog look at when the owner communicates with him - at his hands or face? And when they bring a bowl of food?

Other interesting news:

▪ Space elevator test

▪ Pocket speaker

▪ Charge your phone on the street

▪ Concentration of thoughts hinders creativity

▪ Hydrogen train from CRRC and Chengdu Rail Transit

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Electrical work. Article selection

▪ article by Kifa Mokievich. Popular expression

▪ article When did you start wearing wedding rings? Detailed answer

▪ Buer Tetra article. Personal transport

▪ article Theory: switching power supplies. Encyclopedia of radio electronics and electrical engineering

▪ article Perpetuum mobile already created? Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews