Job description for mortar pump operator

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for the mortar pump operator. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The mortar pump operator reports directly to _______.
Mortar pump driver follows instructions __________
Mortar pump operator replaces _______.
The mortar pump operator is replaced by _______.
Must know:

device, principle of operation, technical characteristics of the mortar pump;
causes, methods for identifying and eliminating faults;
rules for performing work on technology, requirements for their quality;
lubrication modes;
consumption rates of electricity and lubricants, ways to save them;
plumbing for the repair of construction or other machines of similar complexity.

Qualification requirements:

complete or basic general secondary education;
vocational education without presenting requirements for work experience or obtaining a profession directly at the workplace, advanced training and work experience as a mechanic for the repair of road-building machines and tractors or other machines of the 2nd category of similar complexity for at least 1 year;
certificate of assignment of qualification group II for electrical safety.

II. Official duties

Mortar pump operator:

He manages the mortar pump when supplying the mortar to the place of use (for finishing, concrete, insulation works) during the construction of objects for various purposes.
Performs daily maintenance of the mortar pump, participates in its scheduled preventive maintenance.
Performs related work.

III. Rights

The mortar pump operator has the right to:

Get acquainted with the draft decisions of the management of the enterprise regarding its activities.
Participate in the discussion of issues related to the performance of his duties.
Make suggestions for improving the work related to the provisions of this instruction.
Within the limits of his competence, inform his immediate supervisor about all those identified in the course of his activities, and make proposals for their elimination.
Require the management of the enterprise to assist in the performance of their duties.

IV. A responsibility

The pump operator is responsible for:

For improper performance or non-performance of their official duties, as well as for non-use or directly to their rights provided for by this Job Description - to the extent determined by the current legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor legislation on labor of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Club conductor. Job description

▪ Physician for the hygiene of children and adolescents. Job description

▪ Packing machine operator. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Implant LEDs Control Brain Functions 21.04.2013

Scientists at St. Louis University and the University of Illinois have developed microscopic LEDs thinner than a human hair.

These LEDs can be implanted anywhere on the body using a standard thin medical needle. The essence of the experiment is as follows: first, genetic engineers modified mice using optogenetics technology, that is, they “taught” brain neurons to turn on and off according to a light signal created by a tiny LED. Then, an LED was implanted closer to these neurons. Turning on the LED activates the neurons, and turning it off, on the contrary, deactivates them. In this way, specific brain functions can be controlled.

With the help of a miniature LED and optogenetics, scientists were able to control the reward system: due to the inclusion of certain neurons, dopamine was released, causing a feeling of satisfaction.

The researchers believe that LED implants, which are made on the basis of printed electronics, will be useful in other neurological studies. Today, similar devices are already used to stimulate peripheral nerves, which reduces or completely disables pain. True, until now it was necessary to use thin optical fibers and laser emitters, which limited the possibilities of optogenetics.

Wireless LED implants offer much more flexibility. Moreover, devices with LEDs of several colors are able to activate and control several neural circuits at the same time. In addition to LEDs, tiny sensors can be added to the implants to take readings of temperature and electrical activity in the brain. The new LED technology is arguably one of the most important advances in neuroscience. It will help you better understand what happens to the brain as a result of disorders such as stress, depression and anxiety. In addition, the control of neural networks can effectively treat these conditions, relieve pain and fear.

Pessimists also have a topic for discussion: such a powerful artificial incentive mechanism can turn anyone into a slave, because today the feeling of satisfaction is realized by much more complex things, such as relationships, purchases, domestic comfort, career, power, creative achievements, etc. In a society of "chip" people, such "difficulties" are not needed.

Other interesting news:

▪ 20nm LPDDR3 DRAM chips with 6Gb density

▪ Christmas tree hooked up to an electric eel

▪ Hydrofoil Electric Taxi Candela P-12

▪ HDD TV from Sanyo

▪ Li-ion battery with water instead of electrolyte

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the site Funny puzzles. Article selection

▪ article Steps of a sazhen. Popular expression

▪ article Where did the word fuck come from and what is its original meaning? Detailed answer

▪ Article First aid for thermal burns. Health care

▪ article Preparatory work before wiring. Marking work. Encyclopedia of radio electronics and electrical engineering

▪ article Broken magic wand. Focus Secret

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews