Job description for an electric winch driver

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for an electric winch driver. Full Document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The electric winch driver reports directly to _______.
The electric winch operator follows the instructions of _______.
The electric winch driver replaces _______.
The electric winch driver is replaced by _______.
Must know:

device, principle of operation, technical characteristics of the electric winch;
rules for the performance of lifting, cargo and installation work and requirements for their quality;
causes, methods for identifying and eliminating faults;
lubrication modes;
consumption rates of electrical energy, lubricants and ways to save them;
plumbing for the repair of construction or other machines of similar complexity.

Qualification requirements:

basic or incomplete basic general secondary education;
obtaining a profession directly at work;
work experience as a mechanic for the repair of road-building machines and tractors or other machines of the 2nd category of similar complexity for at least 1 year;
availability of a certificate of assignment of the II qualification group for electrical safety.

II. Official duties

Supervises single-drum electric winches when performing loading and unloading, lifting operations, pulling cables of underground power transmission lines and communication with a pulling force of winches up to 5 tons inclusive.
Performs related duties.

III. Rights

The electric winch driver has the right to:

Get acquainted with the draft decisions of the organization's management regarding its activities.
Make proposals for improving the work related to the responsibilities provided for in this instruction.
Within the limits of his competence, report to his immediate supervisor about all the shortcomings identified in the course of his activities and make proposals for their elimination.
Request personally or on behalf of the management of the organization from the departments of the organization and other specialists information and documents necessary for the performance of their duties.
Involve specialists from all (individual structural divisions) in solving the tasks assigned to it (if this is provided for by the regulations on structural divisions, if not, then with the permission of the head of the organization).
Require the management of the enterprise to assist in the performance of their duties and rights.

IV. A responsibility

The winch operator is responsible

For improper performance or non-performance of their official duties provided for by this Job Description - within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Accountant of the Control Department. Job description

▪ Timekeeper. Job description

▪ Hydraulic engineer. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Canadarm3 manipulator for the Lunar Gateway space station 16.03.2022

François-Philippe Champagne, Minister of Innovation, Science and Industry of Canada, announced that MacDonald, Dettwiler and Associates Ltd. (MDA) will receive $268,9 million for the implementation of the second phase of Canadarm3. Recall, Canadarm3 is a service robotic arm for the Lunar Gateway circumlunar space station.

Canada uses the Industrial and Technological Benefits Policy, which stipulates that the country's contribution to the Lunar Gateway will be designed and built in Canada with the direct participation of Canadian suppliers. It is noted that the MDA will support research and development, create further business activity at key industrial facilities in the Canadian space sector.

MDA will use the allocated funds to begin the design phase of the Canadarm3 robotic system. At the development stage, machine vision technologies and advanced developments in the field of artificial intelligence will be involved. As conceived by the authors of the project, the Canadarm3 system should be a highly autonomous robotic system designed to maintain, repair and test the Lunar Gateway. In addition, Canadarm3 is designed to capture incoming spacecraft, assist astronauts during spacewalks, and support scientific research both in lunar orbit and on the lunar surface.

Canadarm3 is scheduled to launch in 2027. The system will consist of a large, next-generation robotic arm, a small, nimble arm, and a set of specialized tools.

Other interesting news:

▪ A computer the size of a business card and a millimeter thick

▪ Chocolate that doesn't melt

▪ Neural noise helps you learn

▪ Walking as a cure for depression

▪ LT1990 Micro Power Differential Amplifier

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ section of the website Basics of First Medical Aid (BFA). Selection of articles

▪ article Knight for an hour. Popular expression

▪ article What explains the existence of butterflies, in which wing patterns are completely different? Detailed answer

▪ article Work with provided psycho-neurological boarding school. Standard instruction on labor protection

▪ article The principle of operation of transformers. Theoretical provisions. Encyclopedia of radio electronics and electrical engineering

▪ article Program selector for Ishim-003 radio receiver. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews