Job description for a mechanical engineer

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for a mechanical engineer. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The mechanical engineer is subordinate to and receives orders, work orders directly from the deputy director for technical issues.
The mechanical engineer gives direct orders and guidelines _______.
During the absence of the Mechanical Engineer, he is replaced by an electrician.
Work in this position requires the employee to have the following qualifications:
Education - higher technical;
The minimum experience in a managerial position is 3 years.

II. Official duties

The Mechanical Engineer is responsible for the following:

Ensuring trouble-free and reliable operation of equipment, proper operation, timely repair.
Participation in solving technical problems of the enterprise's activities for the operation of gas stations (hereinafter - gas stations).
Implementation of technical supervision over the condition and repair of gas station equipment.
Organization of the preparation of calendar plans (schedules) for inspections, checks and repairs of equipment and measuring instruments, obtaining the necessary materials and spare parts.
Participation in the acceptance and installation of new equipment, organization of equipment accounting, preparation of documents for decommissioning of used equipment.
Analysis of the causes and duration of downtime associated with the technical condition of the equipment.
Development and implementation of progressive methods of repair and restoration of equipment, measures to increase the service life of equipment, reduce downtime, prevent accidents and industrial injuries.
Participation in the development of instructions for the technical operation of equipment, care for it, safe repair work, compliance with applicable standards, rules, maintenance of technical documentation for equipment.
Organization of accounting for the performance of work on the repair and modernization of equipment, quality control, correct consumption of materials released for these purposes.
Ensuring compliance with the rules of labor protection and safety in the production of repair work.

III. Rights

The mechanical engineer has the right:

give orders to subordinate employees and control their execution;
submit to the deputy director for technical issues for promotion or punishment of employees who are directly subordinate;
independently resolve technical issues by giving written and oral instructions aimed at implementing an action plan to improve the technical level of operation of gas stations, within the limit of funds approved by the director;
independently conducts correspondence on behalf of the enterprise with third-party enterprises, including with state authorities, on issues related to direct duties.

IV. A responsibility

The mechanical engineer is responsible for:

For failure to perform (improper performance) of their official duties provided for by this Job Description, within the limits determined by the current labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current labor, criminal and civil legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Promoter. Job description

▪ Infectious disease physician. Job description

▪ Concrete worker. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Charging an electric car in 10 minutes 30.10.2019

In English, there is a term "range anxiety" - one of the factors that still prevents normal sales of battery-powered electric vehicles from being established. Roughly speaking, this is the fear that the battery will not be enough to get you to your destination. This fear is justified, because today the capacity of such batteries is small, and they charge from an hour, or even several times longer.

However, this problem may soon be a thing of the past. Scientists at the University of Pennsylvania have developed a technology that allows modern EV batteries to be fully charged in just a few minutes. "We have demonstrated that we can charge an electric car in 10 minutes and after that it will travel from 350 to 500 km," said chemical engineer Chao-Yang Wang. According to him, the technology supports 2500 such charging cycles, which is equivalent to 750 kilometers.

This is important because EV batteries (like those found in laptops and smartphones) are lithium-ion batteries that only last a limited number of charge-discharge cycles before becoming completely useless. One of the main factors contributing to the acceleration of this process is heating - that is why it is important to prevent the device from overheating and properly cool its electronic filling.

The new technology solves this problem quite elegantly. During extremely fast charging, the battery does heat up - but only for a very short time. Developer research shows that this greatly slows down battery wear compared to our usual counterparts.

"In this case, the positives and benefits for the user far outweigh the negatives," says Wang.

Other interesting news:

▪ When the phone is life-threatening

▪ Street lighting on request

▪ Quantum microscope sees tiny changes in atoms

▪ Miniature proximity sensor based on vein pattern

▪ grass paper

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Power supplies. Article selection

▪ article Rare bird. Popular expression

▪ article Since when have the Tour de France been played? Detailed answer

▪ Galvanic article. Job description

▪ article Voltage stabilizer for heavy motorcycles. Encyclopedia of radio electronics and electrical engineering

▪ article Modernization of the dynamic head 20GDS-1. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews