Job description for the controller of passenger transport

Free technical library

JOB INSTRUCTIONS
Free library / Occupational Safety and Health / Job descriptions

Job description for the controller of passenger transport. Full document

Occupational Safety and Health

Occupational Safety and Health / Job descriptions

Comments on the article

I. General Provisions

The controller of passenger transport belongs to the category of technical executors.
A person who has an initial professional education, without presenting requirements for work experience, or a secondary (complete) general education and special training according to an established program, without presenting requirements for work experience, is appointed to the position of a passenger transport controller.
The controller of passenger transport is appointed and dismissed by order of the head of the enterprise on the proposal of _______ and is directly subordinate to _______.
The controller of passenger transport must know:

resolutions, orders, orders, other governing and regulatory documents of higher authorities relating to the operation of passenger transport;
rules for the carriage of passengers, baggage (hand luggage);
rules of the road in terms of stopping vehicles and permitted speeds;
forms of travel and transportation documents;
fares for passengers and baggage (hand luggage);
ethics of communication with passengers;
the procedure for collecting fines and the rules for issuing receipts and imposing fines on violators of the rules of travel (carriage of luggage) in passenger transport;
basics of labor organization;
legislation on labor and labor protection;
rules of internal labor regulations;
rules and norms of labor protection, safety measures, industrial sanitation and fire safety.

During the absence of the controller of passenger transport (vacation, illness, etc.), his duties are performed by a person appointed in the prescribed manner.

II. Official duties

Passenger Transport Controller:

Checks on passenger transport whether passengers have documents for travel and baggage (hand luggage).
Monitors compliance by passengers with the rules of travel and baggage.
Imposes fines on passengers and collects them in the prescribed manner for violations of the rules of travel and baggage.
Supervises the implementation by road transport workers of the rules for the transportation and service of passengers.
Checks whether the conductors or drivers (working without conductors) have filled in the ticket registration sheets correctly and whether the traffic schedule is observed.
Controls the equipment of buses and taxis, as well as the equipment of linear structures and stopping points.
Draws up acts and reports on violations committed by road transport workers.

III. Rights

The controller of passenger transport has the right:

Receive from specialists of structural divisions of the enterprise the information necessary for the implementation of its activities.
Submit proposals on issues related to their activities for consideration by their direct management.
Require the management of the enterprise to assist in the performance of their duties.
Get acquainted with the draft decisions of the management of the enterprise relating to its activities.

IV. A responsibility

The Passenger Transport Controller is responsible for:

For improper performance or non-performance of their official duties provided for by this Job Description, within the limits determined by the labor legislation of Ukraine.
For offenses committed in the course of carrying out their activities - within the limits determined by the administrative, criminal and civil legislation of Ukraine.
For causing material damage - within the limits determined by the current legislation of Ukraine.

We recommend interesting articles Section Job descriptions:

▪ Auditor Accountant. Job description

▪ Deputy director of the school for educational work. Job description

▪ Financial Consultant. Job description

See other articles Section Job descriptions.

Read and write useful comments on this article.

<< Back

Latest news of science and technology, new electronics:

Machine for thinning flowers in gardens 02.05.2024

In modern agriculture, technological progress is developing aimed at increasing the efficiency of plant care processes. The innovative Florix flower thinning machine was presented in Italy, designed to optimize the harvesting stage. This tool is equipped with mobile arms, allowing it to be easily adapted to the needs of the garden. The operator can adjust the speed of the thin wires by controlling them from the tractor cab using a joystick. This approach significantly increases the efficiency of the flower thinning process, providing the possibility of individual adjustment to the specific conditions of the garden, as well as the variety and type of fruit grown in it. After testing the Florix machine for two years on various types of fruit, the results were very encouraging. Farmers such as Filiberto Montanari, who has used a Florix machine for several years, have reported a significant reduction in the time and labor required to thin flowers. ... >>

Advanced Infrared Microscope 02.05.2024

Microscopes play an important role in scientific research, allowing scientists to delve into structures and processes invisible to the eye. However, various microscopy methods have their limitations, and among them was the limitation of resolution when using the infrared range. But the latest achievements of Japanese researchers from the University of Tokyo open up new prospects for studying the microworld. Scientists from the University of Tokyo have unveiled a new microscope that will revolutionize the capabilities of infrared microscopy. This advanced instrument allows you to see the internal structures of living bacteria with amazing clarity on the nanometer scale. Typically, mid-infrared microscopes are limited by low resolution, but the latest development from Japanese researchers overcomes these limitations. According to scientists, the developed microscope allows creating images with a resolution of up to 120 nanometers, which is 30 times higher than the resolution of traditional microscopes. ... >>

Air trap for insects 01.05.2024

Agriculture is one of the key sectors of the economy, and pest control is an integral part of this process. A team of scientists from the Indian Council of Agricultural Research-Central Potato Research Institute (ICAR-CPRI), Shimla, has come up with an innovative solution to this problem - a wind-powered insect air trap. This device addresses the shortcomings of traditional pest control methods by providing real-time insect population data. The trap is powered entirely by wind energy, making it an environmentally friendly solution that requires no power. Its unique design allows monitoring of both harmful and beneficial insects, providing a complete overview of the population in any agricultural area. “By assessing target pests at the right time, we can take necessary measures to control both pests and diseases,” says Kapil ... >>

Random news from the Archive

Solid state optical nanodrive 27.07.2022

Engines of various types are a fairly common thing in our daily lives, they are present in cars, washing machines, computers and many other things. There are also tiny nanomotors that are used to power nanobots, microelectromechanical systems, and other devices that can only be seen under a microscope. However, most of the previously created flooders, especially those driven by light, are capable of operating only in a liquid medium, which significantly narrows the scope of their practical application.

Researchers at the University of Texas at Austin have demonstrated a first-of-its-kind solid-state optical nanodrive that can be built into any device, even an electronic chip chip.

This new tiny engine is less than 100 nanometers wide. It is a substrate made of a special energy-intensive material that changes its phase state (from solid to gas-liquid) under the influence of light, and one or two metal nanoparticles acting as a rotor, moving along a circle in the region of the phase transition of the substrate material.

Similar motors, placed on chip crystals, can convert light energy into kinetic energy of motion and, then, electrical energy. This, in turn, will allow the creation of electronic devices capable of operating under natural or artificial light without the use of any type of fuel, batteries or other external energy sources.

In their future work, the Texas researchers will try to improve the nanoengine they have created by using other materials for the substrate and nanoparticles. This, in their opinion, will increase the stability of the engine, improve controllability and increase the efficiency of converting light energy into energy of mechanical motion.

Other interesting news:

▪ Samurai brushing their teeth

▪ Gas stove is more harmful than passive smoking

▪ Intel Centrino Technology

▪ Advisor from the garden

▪ Google will only use renewable energy

News feed of science and technology, new electronics

Interesting materials of the Free Technical Library:

▪ site section Preamplifiers. Article selection

▪ article I am a man, and nothing human is alien to me. Popular expression

▪ article Has Paris always been a city of dreams? Detailed answer

▪ article Work from the lift, located on the railcar ADM. Standard instruction on labor protection

▪ article Eliminate the flickering of a fluorescent energy-saving lamp. Encyclopedia of radio electronics and electrical engineering

▪ article A device for determining interturn short circuits. Encyclopedia of radio electronics and electrical engineering

Leave your comment on this article:

All languages of this page

Home page | Library | Articles | Website map | Site Reviews